• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.648-661
• /
• 1997

This paper presents a new method for post-processing of coded images based upon the low-pass filtering followed by the projection onto the NQCS (narrow quantization constraint set). We also investigate how the proposed method works on JPEG-coded real images. The starting point of the QCS-based post-processing techniques is the centroid of the QCS, where the original image belongs. The low-pass filtering followed by the projection onto the QCS makes the images lie on the boundary of the QCS. It is likely that, however, the original image is inside the QCS. Hence projection onto the NQCS gives a lower MSE (mean square error) than does the projection onto the QCS. Simulation results show that setting the narrowing coefficients of the NQCS to be 0.2 yields the best performance in most cases. Even though the JPEG-coded image is low-pass filtered and projected onto the NQCS repeatedly, there is no guarantee that the resultant image has a lower MSE and goes closer to the original image. Thus only one iteration is sufficient for the post-processing of the coded images. This is interesting because the main drawback of the iterative post-processing techniques is the heavy computational burden. The single iteration method reduces the computational burden and gives us an easy way to implement the real time VLSI post-processor.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.662-674
• /
• 1997

In order to post process the vector-quantized images employing the theory of projections onto convex sets or the constrained minimization technique, the the projector onto QCS(quantization constraint set) as well as the filter that smoothes the lock boundaries should be investigated theoretically. The basic idea behind the projection onto QCS is to prevent the processed data from diverging from the original quantization region in order to reduce the blurring artifacts caused by a filtering operation. However, since the Voronoi regions in order to reduce the blurring artifacts caused by a filtering operation. However, since the Voronoi regions in the vector quantization are arbitrarilly shaped unless the vector quantization has a structural code book, the implementation of the projection onto QCS is very complicate. This paper mathematically analyzes the projection onto QCS from the viewpoit of minimizing the mean square error. Through the analysis, it has been revealed that the projection onto a subset of the QCS yields lower distortion than the projection onto QCS does. Searching for an optimal constraint set is not easy and the operation of the projector is complicate, since the shape of optimal constraint set is dependent on the statistical characteristics between the filtered and original images. Therefore, we proposed a hyper-cube as a constraint set that enables a simple projection. It sill be also shown that a proper filtering technique followed by the projection onto the hyper-cube can reduce the quantization distortion by theory and experiment.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.50
• /
• pp.267-279
• /
• 1999

In 1995, 100PPM Quality Certification System(QCS) has been established by the Industrial Advancement Administration. This study shows the tangible and intangible effects of 100PPM QCS in Korea. 100PPM QCS has been introduced to observe the substantial objects and to solve problems. To achieve this goal, problems of certification system were classified by certification inspection items, certification inspection, post management and inspection methods. This set of problems are also found when enterprise carrying out 100PPM. It is suggested to utilize the proposed problems and improvements which are to upgrade and correct the 100PPM QCS in the beginning stage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6B
• /
• pp.1113-1122
• /
• 1999

In this paper, we propose MSS(Multicast Synchronization Server) and QCS(QoS Conversion Server) models that can support IP multicast and QoS(Quality of Service) over the ATM network more efficiently. In the MSS model, it is possible to establish shortcut VCs(Virtual Circuits) among all hosts in the ATM network and to transfer multicast data at high speed. Also the MSS model is more scalable, because the number of inter-cluster VCs needed in the MSS model is less than that of EARTH. In the QCS model, ATM switch is modified to support one QoS service and best effort service through the one point-to-multipoint VC at the same time so required network resources are reduced, and dedicated server is used for QoS conversion to accept heterogeneous receivers more efficiently. In this Paper, the proposed MSS model and QCS model have solved both efficiency problem and scalability problem. It is proved through the comparison of the VCs required in each model.

• Journal of Power Electronics
• /
• v.19 no.1
• /
• pp.179-189
• /
• 2019

Four-quadrant converters (4QCs) are widely used as AC-DC power conversion interfaces in many areas. A control delay commonly exists in the digital implementation process of 4QCs, especially for high power 4QCs with a low switching frequency. This usually results in alternating current distortion, increased current harmonic content and system instability. In this paper, the control delay is divided into a computation delay and a PWM delay. The impact of the control delay on the performance of a 4QC is briefly analyzed. To obtain a fundamental value of AC current that is as accurately as possible, a specific sampling method considering the PWM pattern is introduced. Then a current predictive control based on a modified z-transform is proposed, which is effective in reducing the control delay and easy in terms of digital implementation. In addition, it does not depend on object models and parameters. The feasibility and effectiveness of the proposed predictive current control method is verified by simulation and experimental results.

• Industrial Engineering and Management Systems
• /
• v.12 no.4
• /
• pp.359-367
• /
• 2013

The amount of international trade is rapidly increasing as a result of globalization. It is well known that as the size of a vessel becomes larger, the transportation cost per container decreases. That is, the economy-of-scale holds even in maritime container transportation. As a result, the sizes of containerships have been steadily increased for reducing transportation costs. In addition, various handling technologies and handling equipment have been introduced to increase the throughput capacities of container terminals. Quay crane (QC) that carries out load/unload operations plays the most important role among various handling equipment in terminals. Two typical examples of advanced QC concepts proposed so far are double trolley QC and supertainer QC. This paper suggests a method of estimating the expected value and the standard deviation of the container handling cycle time of the advanced QCs that involve several handling components which move at the same time. Numerical results obtained by the proposed estimation procedure are compared with those obtained by simulation studies. In order to demonstrate the advantage of advanced QCs, we compared their expected cycle times with those of a conventional QC.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.7
• /
• pp.1685-1695
• /
• 1996

The postprocessing of compressed images based on the projections onto convex sets and the constrained minimization imposes several constraints on the procesed data. The quantization constraint has been commonly used in various algorithms. Quantization is many-to-one mapping, by which all the dat in a quantization region are mapped to the corresponding representative level. The basic idea behind the projection onto the QCS(quantization constraint set) is to prevent the processed data from diverging from the original quantization region in order to redue the artifacts caused by filtering in postprocessing. However, there have been few efforts to analye the POQCS(projection onto the QCS). This paper analyzed mathematically the POQCS of filtered data from the viewpoint of minimizing the mean square error. Our analysis shows that a proper filtering technique followed by the POQCS can reduce the quantization distortion. In the conventional POQCS, the outside data of each quantization region are mapped into the corresponding boundary. Our analysis also shows that mappingthe outside data to the boundary of a subregion of the quantization region yields lower distortion than does the mapping to the boundary of the original region. In addition, several examples and discussions on the theory are introduced.

• Journal of the Korean Chemical Society
• /
• v.44 no.1
• /
• pp.10-16
• /
• 2000

In general, acid rain is unbuffered solution with low ionic strength and high resistance. Therefore during the pH measurement of acid rain, error can be occurred due to the liquid junction potential difference between the sample and the standard solution. Actually the average conductivity of rain in Taeduk Science Town during 1998 is 12.8 ${\mu}S/cm$, while that of pH standmd solutions is about 5,980 ${\mu}S/cm$. There is a large difference in ionic strength. To compensate the bias due to residual liquid junction potentials, a quality control standard(QCS) of dilute sulfuric acid, which has the conductivity and pH values simikw to rain, was prepared. The pH of QCS solution was determined using the hydrogen electrode system without liquid junction, and compensation has been made for the bias terms by performing the pH measurements with glass electrode. On the basis of this compensation method, the pH vaiues of rain in Taeduk Science Town during 1998 were measured.

• The Journal of the Korea Contents Association
• /
• v.10 no.4
• /
• pp.45-54
• /
• 2010

In this paper, we propose a quality interworking control system to enhance user's quality satisfaction in NGN environment by controling QoS parameters related with QoE in network layer when service user's QoE using variance multimedia service is poor. The proposed system gathers QoS parameter information in network layer through control packet such as RTCP, and evaluates QoE of multimedia service using these QoS parameter information. Comparing the evaluated QoE with the measured QoE in application layer, QCS judges quality degradation, deduces related QoS parameters and decides relative importance of each parameter when QoE is lower than threshold value. QCS generates QoS control values which is based on routing and switching policy in service quality control system(SCS) and forwards them to SCS. Through this proposed system, service and network providers can provide multimedia services of enhanced quality to service users taking account of service characteristic and network performance.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.10a
• /
• pp.220-221
• /
• 2009

One of the important performance measure for productivity at container terminals is the working productivity in the quay. working scheduling of quay cranes (QCs) gives a significant impact on the quay working productivity. The recent managers of the terminals pay high interests in equipment investment and operation methods with a new concept in order to enhance the quay working productivity. The double cycle or dual cycle, which is a method to increase the quay productivity with no application of new equipment, but with the change of operations, has been received strong attention in academic research. The majority of studies until this time has been realized the quay work as the bottleneck and focused on those works. However, if the QCs do notver, it the Cs d-trotver,(CT) if t the Cs, there would be the pos ibilf tes that the effectiveness of them is decreasedveaused by the longer, if t the Cs. Thus, this paper, suggests the solutions on the con th scheduling for the dual cycle operation considering the YT.