• Journal of Bio-Environment Control
• /
• v.27 no.1
• /
• pp.71-79
• /
• 2018

This study was conducted to compare the physicochemical properties of newly developed artificial medium and conventional plug medium and to investigate the proper irrigation interval to produce the high quality tomato seedlings. The five existing artificial media (organic medium coir, mixed medium Tosilee and Q plug, and inorganic medium LC and rockwool) and four newly developed artificial medium (mixed medium TP-S1 and inorganic medium PU 14-S1, PU-7B, and PU 15-S1) were used to grow tomato 'Yegwang' with irrigation interval of one-day (14 times), two-day (7 times), and three-day (5 times) for 14 days. The pH was the significantly highest in the PU 15-S1. All growing medium measured were in the range of pH 5.17-6.90. EC was the highest in the Q plug. The initial germination rate was the highest in the PU 15-S1. The final germination rate and mean daily germination were not significantly different in all growing medium except for the PU 14-S1. Growth of tomato seedlings at 15 days after sowing was the greatest in the Q plug. At 29 days after sowing, seedlings were also the greatest in the Q plug, followed by rockwool and PU-7B. Also, growth was better in the one-day interval treatment. As a result, we confirmed the applicability of the artificial medium to tomato plug seedlings in this experiment, and seedlings were the greatest in the Q plug. Therefor, it is considered that adding nutrients to the artificial medium of the newly developed medium PU-7B, and applying the irrigation one-day interval can produces high quality tomato seedlings similar to using Q plug.

• Journal of Korean Society of Forest Science
• /
• v.82 no.3
• /
• pp.221-226
• /
• 1993

Methods for shoot proliferation via pulse treatment onto the microshoots of Quercus acutissima, and ex vitro root induction using peat plug systems of the microshoots of 4 oak trees were described. Pulsing solution was prepared by the addition of BA and/or BA plus zeatin onto the aqueous WPM and sterilized distilled water. Using the solution, pulsing time was adjusted at different levels(0. 1, 2, 5. 9, and 24 hours). Although the effect of pulsing solution prepared by the addition of cytokinins onto the sterilized distilled water was slightly lower in shoot proliferation rate, a little higher in shoot elongation was observed compared with that of aqueous WPM. One hour of pulse treatment revealed best in shoot proliferation and its elongation, whereas the increment of pulsing time slightly suppressed the response. In addition, prolonged pulse time resulted high frequency of hyperhydric shoot appearance. Single treatment of BA was better in shoot proliferation than that of BA combination with zeatin, whereas the latter treatment usually showed rapid and healthy shoot growth. For ex vitro root induction using peat plug systems, black oaks(Q. acutissima and Q. variabilis) revealed excellent rootability compared with white oaks(Q. serrata and Q. mongolica). Shoot-tip necrosis of white oaks eras one of the big problems for survival. In this study, we discribed the effect of pulse treatment, successful ex vitro rooting system by the incorporation of peat plug, and the possibilities for the overcoming the obstacles on micropropagation of oaks.

• Journal of Biosystems Engineering
• /
• v.26 no.3
• /
• pp.253-262
• /
• 2001

This study was conducted to develop the vision system of a robotic transplanter for plug-seedling. A color image processing algorithm was developed to identify and locate empty cells and bad plants in the seedling tray. The image of pepper and tomato seedling tray was segmented into regions of plants, frame and soil using threshold technique which utilized Q of YIQ for finding leaves and H of HSI for finding frame of tray in the color coordinate system. The recognition system was able to successfully identify empty cells and bad seeding and locate their two-dimensional locations. The overall success rate of the recognition system was about 99%.

• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.134-142
• /
• 2019

This study was conducted to evaluate the growth characteristics of lettuce (Lactuca sativa L.) as affected by artificial light sources and different growing media in a closed-type plant production system (CPPS). The lettuce seeds were sown in the 128-cell plug tray filled with 5 different growing media such as urethane sponge (US), rock-wool (RW), Q-plug (QP), TP-S2 (TP) and PU-7B (PU). The germination rate of lettuce seeds was examined during 12 days after sowing. On the 13 days after sowing, the lettuce seedlings were transplanted in a CPPS with temperature $25{\pm}1^{\circ}C$ and nutrient solution (EC $2.0dS{\cdot}m^{-1}$, pH 6.5) using recirculating deep floating technique system. The light sources were set with FL (fluorescent lamps) and combined RB LEDs (red : blue = 7 : 3) with $150{\pm}10{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD and a photoperiod of 14/10 hours (light/dark). The initial germination rate of lettuce was the highest in TP. The final germination and mean daily germination were the significantly highest in RW, QP and TP. The plant height, leaf length, leaf width, leaf area, and fresh and dry weights of shoot were the greatest in QP irradiated with RB LED. The number of leaves, fresh and dry weights of root and SPAD were the greatest in QP and TP irradiated with RB LED. The root length was the longest in TP irradiated with RB LED. Therefore, these results indicate that RB LED was effective for the growth of lettuce and it was also found that the QP and TP were effective for the germination and growth of lettuce in a CPPS. In addition, we confirmed the applicability of the newly developed growing medium TP for the lettuce production in a CPPS.

• International Journal of Automotive Technology
• /
• v.8 no.4
• /
• pp.413-419
• /
• 2007

Experimental study of additives on the ignition performance of a compression ignition natural gas engine is introduced, followed by results of a simulation of its working mechanism. From the experimental results, it is understood that engine ignition performance can be improved when a certain amount of Di-tertiary-butyl peroxide additive is added. If the mass fraction of Di-tertiary-butyl peroxide additive reaches as high as 14.2%, engine ignition can be realized at ambient temperatures with a glow plug temperature of about $750^{\circ}C$. From the simulation results, we verify that the Di-tertiary-butyl peroxide additive, by cracking its radicals at lower temperature, can accelerate reaction rate. Therefore, the additive is able to improve the ignition performance of natural gas significantly.

• Journal of the Korean Society for Railway
• /
• v.7 no.3
• /
• pp.173-179
• /
• 2004

This paper describes a low-cost single-phase active power filter, which consists of a half-bridge PWM inverter with a simple control circuit. In order to verify the performance of proposed active power filter, many computer simulations with EMTP codes and experimental works with a hardware prototype were done. Both results confirm that the proposed active power filter shows excellent performance to eliminate the harmonics generated in the single-phase non-linear load. The active power filter has advantage of low implementation cost and compact size, using a half-bridge inverter and a simple control circuit with only one current sensor. So, it can be fabricated as a plug-in type. This paper shows the necessity and a good possibility to apply such advantage to the electric railway system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.4
• /
• pp.342-348
• /
• 1999

This paper describes a low-cost single-phase active power filter, which consists of a half-bridge P\A미1 inverter with a s simple control circuit. In order to verify the performance of proposed active power filter, many computer simulations w with EMTP codes and experimental works with a hardware prototype were done. Both results confirm that the p proposed active power filter shows excellent performance to eliminate the harmonics generated in the single-phase non l linear‘ load. The active power filter has advantage of low implementation cost and compact size. using a half-bridge i inverter and a simple control circuit with only one current sensor. So. it can be fabricated as a plug-in type.

• Earthquakes and Structures
• /
• v.15 no.3
• /
• pp.319-334
• /
• 2018

In this paper, an analytical study was carried out to propose an optimum base-isolated system for the design of steel structures equipped with lead rubber bearings (LRB). For this, 5 and 10-storey steel moment resisting frames (MRFs) were designed as Special Moment Frame (SMF). These two-dimensional and three-bay frames equipped with a set of isolation systems within a predefined range that minimizes the response of the base-isolated frames subjected to a series of earthquakes. In the design of LRB, two main parameters, namely, isolation period (T) and the ratio of strength to weight (Q/W) supported by isolators were considered as 2.25, 2.5, 2.75 and 3 s, 0.05, 0.10 and 0.15, respectively. The Force-deformation behavior of the isolators was modelled by the bi-linear behavior which could reflect the nonlinear characteristics of the lead-plug bearings. The base-isolated frames were modelled using a finite element program and those performances were evaluated in the light of the nonlinear time history analyses by six natural accelerograms compatible with seismic hazard levels of 2% probability of exceedance in 50 years. The performance of the isolated frames was assessed in terms of roof displacement, relative displacement, interstorey drift, absolute acceleration, base shear and hysteretic curve.