• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.3
• /
• pp.428-435
• /
• 2024

The important factors in the design of the gun propellant are impetus, flame temperature and pressure. In this paper, we considered a nitrocellulose based propellant composition that replaced sensitive NG(Nitroglycerin) with RDX(Cyclotrimethylenetrinitramine) and DEGDN(Diethylene glycol dinitrate) which high energy and low sensitivity. Particle size and content of RDX are the two main factors that affect the burning stability of RDX-based propellants. Among them, the characteristics of the propellant according to the particle size of RDX were confirmed. The relative combustion rate(R.Q., Relative Quickness) of the propellant changed according to the RDX particle size, and internal ballistics of properties of propellant were also varied. The particle size of RDX can be confirmed as a major factor in the combustion and internal ballistics characteristics of the propellant.

• Food Science of Animal Resources
• /
• v.38 no.6
• /
• pp.1294-1304
• /
• 2018

The aims of this research were to examine the effect of heating temperature (65, 75, and $85^{\circ}C$) and $CaCl_2$ concentration level (3, 4, and 5 mM) on the physicochemical properties of ${\beta}$-lactoglobulin (${\beta}$-lg) nanoemulsions (NEs) and to study how the droplet size of NEs affects the bioaccessibility (BA) of coenzyme $Q_{10}$ ($CoQ_{10}$). The droplet size of NEs and BA of $CoQ_{10}$ was assessed by particle size analyzer and UV-Vis spectrophotometer, respectively. An increase in heating temperature and $CaCl_2$ concentration level resulted in a significant (p<0.05) increase in the droplet size of NEs while there were no significant differences in polydispersity index and zeta-potential of NEs. When NEs containing $CoQ_{10}$ were incubated in simulated small intestinal phases, an increase in the droplet size and polydispersity index of NEs was observed. This indicated that NEs were not stable in small intestine and digestion of NEs occurred. As heating temperature and $CaCl_2$ concentration level were decreased, a significant (p<0.05) increase in BA of $CoQ_{10}$ was observed. There was a significant (p<0.05) increase in BA of $CoQ_{10}$ with a decrease in the droplet size of NEs. In conclusion, heating temperature and $CaCl_2$ concentration level were key-parameters affecting the initial droplet size of NEs and BA of $CoQ_{10}$ was negatively correlated with initial droplet size of NEs.

• Journal of the Korean Society of Safety
• /
• v.17 no.2
• /
• pp.39-44
• /
• 2002

This study was investigated the thermal decomposition characteristics of azo type sponge blowing agent azodicarbonamide(ADCA) using differential scanning calorimeter(DSC). The experimental results showed that the exothermic onset $temperatures(T_{o})$ for ADCA were about $201{\sim}206^{\circ}C$ and evolution heats(Q) were about $144{\sim}150cal/g$. The exothermic onset $temperatures(T_{o})$, exothermic maximum $temperature(T_{m})$ and exothermic final $temperature(T_{f})$ were decreased by decreasing particle size of ADCA and evolution heats(Q) were increased with it. $T_{o}$ and Q for $6.1{\sim}7.2{\mu}m$ ADCA were increased by increasing heating rate at constant sample weight and activation energy was about 37.29kcal/mol. A positive gas pressure was employed in the elucidation of the decomposition behavior of ADCA because it sublimes during linear heating at atmospheric pressure. $T_{o}$ and Q of ADCA tended to increase with a pressure in air or nitrogen. In the case of azo dye, experimental results showed that $T_{o}$ were about $280{\sim}420^{\circ}C$ and Q were about $2{\sim}30cal/g$.

• Biomolecules & Therapeutics
• /
• v.18 no.1
• /
• pp.99-105
• /
• 2010

The purpose of this study was to evaluate relative bioavailability of the coenzyme Q10 (CoQ10) in emulsion and three liposome formulations after a single oral administration (60 mg/kg) into rats. Emulsion formulation of CoQ10 was prepared by conventional method using Phospholipon 85G as an emulsifier, and three liposome formulations (neutral, anionic, and cationic) of CoQ10 were prepared by traditional lipid film hydration technique using Phospholipon 85G, cholesterol, and charge carrier lipids (1,2-dioleoyl-3-trimethylammonium-propane chloride salt for cationic liposome and 1,2-dimyristoyl-sn-glycero-3-phosphate monosodium salt for anionic liposome). Mean particle size of all CoQ10-loaded liposome was less than a micron, and size distribution of the liposome population was homogeneous. Bioavailability of CoQ10 in emulsion was 1.5 to 2.6-fold greater than liposome formulations in terms of $AUC_{0-24\;h}$. $T_{max}$ was 3 h when administered as emulsion while it was greater than 6 h in liposome formulations. Notably, it was approximately 8 h in cationic liposome. $C_{max}$ was highest in emulsion and was significantly decreased when administered as liposome. Charged liposome showed even lower $C_{max}$ than neutral liposome, especially in cationic liposome. In conclusion, therefore, it is suggested that clinicians and patients consider bioavailability issue a primary concern when choosing a CoQ10 product, especially when very high plasma level is required such as in the treatment of heart failure and Parkinson's disease.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.9
• /
• pp.691-695
• /
• 2010

A measurement method of the particle-based reflective display is proposed, estimated, and compared with reported method. The reflectivity measurement by previous studies is simply obtained by integrating sphere, but it has a limitation for the estimation of real moving particles because its data include surface reflection and incomplete attachment on electrodes. To get the number of real moving particles, the area by attached particles on the electrodes is calculated at microscopic signals. The moving particles on subthreshold voltage are observed and this fluctuational variation of surface on subthreshold voltage gives a tip to understand the driving mechanism. By this measurement we ascertained the relationship of a particle layer and real driving particles, and the feasibility of observation and estimation for moving color particles, which were measured by the reflectivity and CIE (Commission Internationale de I'Eclairage) system of color specification at previous studies.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.1
• /
• pp.48-52
• /
• 2012

The charged particle type display device is a kind of the reflectivity type display and shows an image by absorption and reflection of external light source. The charged particle is important factor for driving of the display and quantity of charge per mass of the charged particle determines the driving voltage, contrast ratio, response time, etc. But it is easy for the charged particles to be damaged in the putting process of the display and the damages cause lumping phenomenon of the charged particles. Because the lumping phenomenon makes high driving voltage, low quality of optical properties, short life time, etc, so the charged particles must be filled by stable putting methods. In this paper, we filled the charged particles into the panels by electric fields to improve the electrical and optical characteristics of the display. Also, we analyzed the driving characteristics of the charged particles according to the applied putting voltages.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.6
• /
• pp.333-337
• /
• 2014

In this study, the use of a discharging process for charged particles is proposed to achieve an ideal electrical balance or neutralization and to improve the electrical and optical properties of a reflective electronic display. Here, negatively charged particles (white) and positively charged particles (black) are used. The q/m (charge per mass for a particle) values of the black and white particles are $+4.5{\mu}C/g$ and $-4.5{\mu}C/g$, respectively. We compared the movement of the charged particles by varying their discharging time. Stable movement of the charged particles is obtained with an appropriate discharging time, which resulted in improvements of the optical properties of the panel.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.11
• /
• pp.671-679
• /
• 2004

This paper presents the on-line current controller tuning method of grid-connected inverter using PSO(particle swarm optimization) technique for minimizing the harmonic current. Synchronous frame PI current regulator is commonly used in most distributed generation. However, due to the source voltage distortion, specially in weak AC power system, current may contain large harmonic components, which increase THD(total harmonic distortion) and deteriorates power quality. Therefore, some tuning method is necessary to improve response of current controller. This paper used the PSO technique to tune the current regulator and through simulation and experiments, usefulness of the tuning method has been verified. Especially in simulating the tuning process, ASM(average switching model) of inverter is used to shorten execution time.

• Medical Lasers
• /
• v.10 no.4
• /
• pp.242-245
• /
• 2021

Acne vulgaris is a common inflammatory skin disease of the pilose-baceous unit. It appears as lesions consisting of comedones, papules, pustules, and nodules of varying shapes and severity. In general, the first-line treatment for acne vulgaris includes topical and oral medication. Recently, various physical modalities have also been investigated. The use of laser therapy is steadily increasing because of its fewer side effects, short procedure time, and rapid results. In particular, laser therapy assisted with carbon suspension application is effective for acne vulgaris but may sometimes result in discomfort due to odor and dust formation during the procedure. Herein, we report that acne vulgaris and enlarged facial pores can be safely and effectively treated with laser therapy assisted with diamond particle suspension and gold microparticle application, which can address the discomfort caused by the carbon suspension application.

• New & Renewable Energy
• /
• v.16 no.1
• /
• pp.15-24
• /
• 2020

For mechanical load testing of wind turbines, capture matrix is constructed for various range of wind speeds according to the international standard IEC 61400-13. The conventional method wastes considerable amount of data by its invalid data policy -segment data into 10 minutes then remove invalid ones. Previously, we have suggested an alternative way to save the total amount of data to build a capture matrix, but the efficient selection of data has been still under question. The paper introduces optimization algorithms to construct capture matrix with less data. Heuristic algorithm (simple stacking and lowest frequency first), population method (particle swarm optimization) and Q-Learning accompanied with epsilon-greedy exploration are compared. All algorithms show better performance than the conventional way, where the distribution of enhancement was quite diverse. Among the algorithms, the best performance was achieved by heuristic method (lowest frequency first), and similarly by particle swarm optimization: Approximately 28% of data reduction in average and more than 40% in maximum. On the other hand, unexpectedly, the worst performance was achieved by Q-Learning, which was a promising candidate at the beginning. This study is helpful for not only wind turbine evaluation particularly the viewpoint of cost, but also understanding nature of wind speed data.