• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.795-798
• /
• 1998

In this paper, a new class of bandpass filter using a modified Chebyshev lowpass filter function is described. The prosposed bandpass filter which exhibits diminishing ripples in the passband has maximum value at the center frequency. Due to the lower pole-Q, the performance in the frequency and time domains is improved as compared with the classical Chebyshev bandpass filter.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.4
• /
• pp.131-139
• /
• 2004

This paper proposes a variable-Q digital graphic equalizer with the opposite filters. A method for designing the proposed equalizer is also presented. In the proposed variable-Q equalizer, we adjust the Q-factor of the equalizer filter depending on the gain, yielding an improved equalizer performance. Also, by increasing the Q-factor of the opposite filters gracefully as the gain becomes greater, the inter-band interference can be removed effectively. We shall show that the frequency response of the proposed equalizer can reproduce the user's gain setting faithfully.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.7
• /
• pp.26-31
• /
• 2005

In this paper, a small BPF(band pass filter) is designed using new probe type for wireless communication system. The dielectric resonator is used high Q ceramics for low loss characteristic. In order to provide a band pass filter which can be reduced in dimension, can be reduced in height, and can be surface-mounted. The filter was fabricated using $TE_{01{\delta}}$ mode dielectric resonator. The input/output probes are attached to coner portion of the rectangular metal cavity. Results of the manufactured filter($12{\times}12{\times}8[mm]$) show that the center frequency is 9.95358[GHz], the insertion loss is -1.9[dB], the 3[dB]_bandwidth is 14.9[MHz], and the loaf Q is 664.

• Journal of Advanced Navigation Technology
• /
• v.22 no.1
• /
• pp.27-30
• /
• 2018

In this study, a 40 GHz band pass filter(BPF) employing a hair-pin structure has been designed, fabricated, and characterized for millimeter-wave wireless communication applications. Using the 3 dimensional(3-D) electromagnetic(EM) tool and design equations of the hairpin BPF, the BPF was desgned on the 5 mil-thick Duroid substrate(RT5880) with a relative dielectric constant (${\varepsilon}_r$) of 2.2. The tapping point (t) of the U-shape resonator in the input and output port has been determined using extracted an external Q-factor ($Q_e$). The coupling coefficients between the other resonators are calculated by adjusting the physical dimensions for the desired response of the BPF. The fabricated BPF was characterized using probing method on a probe station. Its measured center frequency(fc) and fractional BW are 41.6 GHz and 7.43 %, respectively. The measured return loss is below -10 dB at the pass band and the insertion loss is 3.87 dB. The fabricated BPF is as small as $9.1{\times}2.8mm^2$.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.10 no.1
• /
• pp.170-178
• /
• 2000

Most of manufacturers try to produce the most efficient filter for respirators with the lowest breathing resistance. Filter performance depends on low penetration, i.e., high efficiency (%), and low pressure drop ($mmH_2O$). This study was performed to evaluate performance of respirator filters by quality factor ($q_F$) and suggest the direction for improvement of respirator filters of good quality in Korea. Two mechanical filters, S and K made in Korea, three filtering facepieces, S made in China, C made in Korea and M made in USA, which were widely used in the workplace, were selected and tested efficiency and pressure drop in accordance with flow rate, using with Automated Filter Tester Model 8110 (TSI, USA). The best quality factor within the same respirator filter categories was $0.0672cm^{-1}\;H_2O$ for mechanical filter S, $0.0698cm^{-1}\;H_2O$ for filtering facepiece M at flow rate of 32Lpm. Mechanical filter S would be the best suitable during heavy work since qulity factors decrease less sharply than any others as increased flow rates. It was necessary for mechanical filter S to lower pressure drop without increasing efficiency, but mechanical filter K should be increased efficiency and decreased pressure drop. While filtering facepiece M had the best quality performance of three ones, Sand C should get much higher efficiency and lower pressure for better performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.11
• /
• pp.966-977
• /
• 2015

This paper presents a novel modified coaxial cavity resonator and its application to bandpass filters with compact size and improved quality factor(Q-factor). The proposed resonator is made up of ${\Gamma}-shape$ or curved four inner conductive posts within a single cavity, which provides quadruplet to realize bandpass filter. No metallic walls inside the cavity are required, and thus the utilization efficiency of the cavity space is improved. As a result, the unloaded Q can be approximately 15 % higher in comparison to the conventional coaxial resonator, or more than 35 % volume saving can be achieved while maintaining the similar Q-factor value with the conventional designs. In addition, due to the multiple cross-coupling occurring within the cavity, including the source-to-load coupling, four flexible transmission zeros can be created to realize different filtering functions. Simulations as well as experimental results of four- and eight-pole filters are presented to validate this attractive design concept. Good agreement between measured and computed results is obtained.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.8
• /
• pp.655-664
• /
• 2002

The disturbance observer (DOB) has been widely utilized for high precision/speed motion control applications. However, it still lacks the analysis for the robustness and performance brought by using DOB. This paper proposes the robustness measure of DOB and reveals the relationships between the disturbance rejection performance and the order/time constant of a Q filter in DOB. Additionally, we propose six guidelines for the design of Q filter and show their validity through the experiments for DVD systems.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.1
• /
• pp.6-11
• /
• 2014

Repetitive control is a specialized control scheme to track and/or attenuate a periodic reference trajectory and/or disturbance. Most researches about repetitive control have been performed in the frequency domain. Recently, several approaches to deal with repetitive control systems in the state space are developed by representing a q filter as a state-space equation. This paper presents a design method of a repetitive control system in the state space to satisfy $H_{\infty}$ performance. The overall system is composed of a plant, a repetitive controller, and a state-feedback controller, which can be converted to a standard form used in $H_{\infty}$ control. A LMI (Linear Matrix Inequality)-based stability condition is derived for fixed state-feedback gains. Under a given q filter, another LMI condition is derived to improve $H_{\infty}$ performance and is employed to find state-feedback gains by solving an optimization problem. Finally, to verify the feasibility of the proposed method, a numerical example is demonstrated.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.1
• /
• pp.96-104
• /
• 2014

The all pass filter generates a virtual q-axis voltage component with $90^{\circ}$ phase delay but the virtual q-axis voltage cannot detect the voltage depending on the phase of the grid voltage. To overcome the problem, q-axis voltage component is generated from difference between the current and previous value of d-axis voltage component in the stationary reference frame. However, the difference voltage between the current and previous value around the zero crossing voltage is not enough to detect the voltage sag. Therefore, the new detection scheme which can detect the sag around the zero crossing voltage is proposed.

• Transactions on Control, Automation and Systems Engineering
• /
• v.3 no.2
• /
• pp.89-94
• /
• 2001

This paper presents an approach to leak detection and location of gas pipelines based on a strong tracking filter(STF). The STF has strong robustness against model uncertainties, which will deteriorate the performance of the extended Kalman filter. Hence, much faster and more accurate leak detection and location has been obtained. Computer simulation results demonstrate the effective-ness of the proposed approach.