• Structural Engineering and Mechanics
• /
• 제53권5호
• /
• pp.867-880
• /
• 2015

Mechanical fastening is still one of the main methods used for joining components. Different techniques have been applied to reduce the effect of stress concentration of notches like fastener holes. In this work we evaluate the feasibility of combining laser shock peening (LSP) and cold expansion to improve fatigue crack initiation and propagation of open hole specimens made of 6061-T6 aluminum alloy. LSP is a new and competitive technique for strengthening metals, and like cold expansion, induces a compressive residual stress field that improves fatigue, wear and corrosion resistance. For LSP treatment, a Q-switched Nd:YAG laser with infrared radiation was used. Residual stress distribution as a function of depth was determined by the contour method. Compact tension specimens with a hole at the notch tip were subjected to LSP process and cold expansion and then tested under cyclic loading with R=0.1 generating fatigue cracks on the hole surface. Fatigue crack initiation and growth is analyzed and associated with the residual stress distribution generated by both treatments. It is observed that both methods are complementary; cold expansion increases fatigue crack initiation life, while LSP reduces fatigue crack growth rate.

• Structural Engineering and Mechanics
• /
• 제62권6호
• /
• pp.739-748
• /
• 2017

Notches such as slots are typical geometric features on mechanical components that promote fatigue crack initiation. Unlike for components with open hole type notches, there are no conventional treatments to enhance fatigue behavior of components with slots. In this work we evaluate the viability of applying laser shock peening (LSP) to extend the fatigue life of 6061-T6 aluminum components with slots. The feasibility of using LSP is evaluated not only on damage free notched specimens, but also on samples with previous fatigue damage. For the LSP treatment a convergent lens was used to deliver 0.85 J and 6 ns laser pulses 1.5 mm in diameter by a Q-switch Nd: YAG laser, operating at 10 Hz with 1064 nm of wavelength. Residual stress distribution was assessed by the hole drilling method. A fatigue analysis of the notched specimens was conducted using the commercial code FE-Safe and different multiaxial fatigue criteria to predict fatigue lives of samples with and without LSP. The residual stress field produced by the LSP process was estimated by a finite element simulation of the process. A good comparison of the predicted and experimental fatigue lives was observed. The beneficial effect of LSP in extending fatigue life of notched components with and without previous damage is demonstrated.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권5호
• /
• pp.2305-2309
• /
• 2012

Crocin, the main pigment of Crocus sativus L., has been shown to have antiproliferative effects on cancer cells, but the involved mechanisms are only poor understood. This study focused on probable effect of crocin on the immortality of hepatic cancer cells. Cytotoxicity of crocin ($IC_{50}$ 3 mg/ml) in hepatocarcinoma HepG2 cells was determined after 48 h by neutral red uptake assay and MTT test. Immortality was investigated through quantification of relative telomerase activity with a quantitative real-time PCR-based telomerase repeat amplification protocol (qTRAP). Telomerase activity in 0.5 ${\mu}g$ protein extract of HepG2 cells treated with 3 mg/ml crocin was reduced to about 51% as compared to untreated control cells. Two mechanisms of inhibition, i.e. interaction of crocin with telomeric quadruplex sequences and down regulation of hTERT expression, were examined using FRET analysis to measure melting temperature of a synthetic telomeric oligonucleotide in the presence of crocin and quantitative real-time RT-PCR, respectively. No significant changes were observed in the $T_m$ telomeric oligonucleotides, while the relative expression level of the catalytic subunit of telomerase (hTERT) gene showed a 60% decrease as compared to untreated control cells. In conclusion, telomerase activity of HepG2 cells decreases after treatment with crocin, which is probably caused by down-regulation of the expression of the catalytic subunit of the enzyme.

• Journal of Magnetics
• /
• 제16권2호
• /
• pp.177-180
• /
• 2011

0.30 mm thick and 90 mm wide thin foils made of Fe-6.5wt.%Si alloy were successfully fabricated by traditional rolling. The as-rolled sheets had good shapes and shining metal luster. The effects of annealing temperature on the magnetic properties of the sheets were investigated. Excellent Dc properties ($H_c$: 11.55 A/m, ${\mu}_m$: 23710, and $B_s$: 1.439 T) were obtained at an annealing temperature of 1453 K for 1.5 h. At low frequencies ($\leq$ 1 kHz), heat treatment temperature has little effect on iron loss which remained at the level of 9.8 W/kg. Annealing at 1273 K for 1.5 h is optimum for frequencies above 5 kHz.

• 드라이브 ㆍ 컨트롤
• /
• 제12권3호
• /
• pp.11-17
• /
• 2015

An intelligent deburring control (IDC) device is used to control the constant force for a deburring tool mounted on the end-effector of a robotic arm. This device maintains a constant contact force between the deburring tool and the workpiece in order to provide a good deburring performance. In this paper, we build a mathematical model in Matlab/Simulink to estimate the force control mechanism of the pneumatic system for the IDC device. The Simulink blocks are built for each separate part and are linked into an integrated simulation system. Such a model also relies on the effects of the flow rate through the valve, air compressibility in the cylinder, and time delay in the pressure valve. The results of the simulation are compared to a simple experiment in which convenient math modeling is performed. These results are then used to optimize the mechanical design and to develop a force control algorithm for the pneumatic cylinder.

• Membrane and Water Treatment
• /
• 제10권6호
• /
• pp.395-404
• /
• 2019

The influence of chlorine on marine bacterial communities was examined in this study. A non-chlorine-adapted marine bacterial community (NCAM) and a chlorine-adapted bacterial community (CAM, bacterial community treated with $0.2mg-Cl_2/L$ chlorine) were cultivated for 1 month. A distinct difference was observed between the NCAM and CAM, which shared only eight operational taxonomic units (OTUs), corresponding to 13.1% of the total number of identified OTUs. This result suggested that chlorine was responsible for the changes in the marine bacterial communities. Kordiimonas aquimaris was found to be a chlorine-resistant marine bacterium. The effect of intermittent chlorination on the two marine biofilm communities formed on the reverse osmosis (RO) membrane surface was investigated using various chlorine concentrations (0, 0.2, 0.4, 0.6 and 0.8 mg $Cl_2/L$). Although the average number of adherent marine bacteria on the RO membrane over a period of 7 weeks decreased with increasing chlorine concentration, disinfection efficiencies showed substantial fluctuations throughout the experiment. This is due to chlorine depletion that occurs during intermittent chlorination. These results suggest that intermittent chlorination is not an effective disinfection strategy to control biofilm formation.

• Biomolecules & Therapeutics
• /
• 제30권1호
• /
• pp.38-47
• /
• 2022

The present study focused on lithocholic acid (LCA), a secondary bile acid that contributes to cholestatic pruritus. Although recent studies have found that LCA acts on MAS-related G protein-coupled receptor family member X4 (MRGPRX4) in humans, it is unclear which subtypes of MRGPRs are activated by LCA in mice since there is no precise ortholog of human MRGPRX4 in the mouse genome. Using calcium imaging, we found that LCA could activate mouse Mrgpra1 when transiently expressed in HEK293T cells. Moreover, LCA similarly activates mouse Mrgprb2. Importantly, LCA-induced responses showed dose-dependent effects through Mrgpra1 and Mrgprb2. Moreover, treatment with QWF (an antagonist of Mrgpra1 and Mrgprb2), YM254890 (Gα_q inhibitor), and U73122 (an inhibitor of phospholipase C) significantly suppressed the LCA-induced responses, implying that the LCA-induced responses are indeed mediated by Mrgpra1 and Mrgprb2. Furthermore, LCA activated primary cultures of mouse sensory neurons and peritoneal mast cells, suggesting that Mrgpra1 and Mrgprb2 contribute to LCA-induced pruritus. However, acute injection of LCA did not induce noticeable differences in scratching behavior, implying that the pruritogenic role of LCA may be marginal in non-cholestatic conditions. In summary, the present study identified for the first time that LCA can activate Mrgpra1 and Mrgprb2. The current findings provide further insight into the similarities and differences between human and mouse MRGPR families, paving a way to understand the complex roles of these pruriceptors.

• 한국재료학회지
• /
• 제22권2호
• /
• pp.61-65
• /
• 2012

A $Li_2O-2SiO_2$ ($LS_2$) glass was investigated as a lithium-ion conducting oxide glass, which is applicable to a fast ionic conductor even at low temperature due to its high mechanical strength and chemical stability. The $Li_2O-2SiO_2$ glass is likely to be broken into small pieces when quenched; thus, it is difficult to fabricate a specifically sized sample. The production of properly sized glass samples is necessary for device applications. In this study, we applied spark plasma sintering (SPS) to fabricate $LS_2$ glass samples which have a particular size as well as high transparency. The sintered samples, $15mm\phi{\times}2mmT$ in size, ($LS_2$-s) were produced by SPS between $480^{\circ}C$ and $500^{\circ}C$ at 45MPa for 3~5mim, after which the thermal and dielectric properties of the $LS_2$-s samples were compared with those of quenched glass ($LS_2$-q) samples. Thermal behavior, crystalline structure, and electrical conductivity of both samples were analyzed by differential scanning calorimetry (DSC), X-ray diffraction (XRD) and an impedance/gain-phase analyzer, respectively. The results showed that the $LS_2$-s had an amorphous structure, like the $LS_2$-q sample, and that both samples took on the lithium disilicate structure after the heat treatment at $800^{\circ}C$. We observed similar dielectric peaks in both of the samples between room temperature and $700^{\circ}C$. The DC activation energies of the $LS_2$-q and $LS_2$-s samples were $0.48{\pm}0.05eV$ and $0.66{\pm}0.04eV$, while the AC activation energies were $0.48{\pm}0.05eV$ and $0.68{\pm}0.04eV$, respectively.

• Journal of Genetic Medicine
• /
• 제5권1호
• /
• pp.26-33
• /
• 2008

목 적 : 페닐케톤뇨증은 상염색체 열성으로 유전되는 아미노산 대사질환으로 PAH와 조효소인 $BH_4$의 활성이 저하되어 발생한다. 본 연구에서는 PAH 유전자 돌연변이와 임상양상과의 연관성을 조사하였고 PAH DNA 변이의 국가간의 차이를 분석하였다. 방 법 : 페닐케톤뇨증 환자와 환자 가족의 동의하에 DNA를 말초혈액의 백혈구에서 분리하여 PAH 유전자를 PCR을 통해 증폭하여 유전자 서열을 분석하였고 PAH 돌연변이가 하나의 대립유전자에서만 발견이 되거나 없는 경우는 분석된 서열을 MLPA를 시행하여 분석을 하였다. 결 과 : 유전자 검사를 시행한 102명의 대립유전자 204개 중 199개의 돌연변이가 발견되어 97%의 검출률을 보였다. 발견된 돌연변이는 총 44가지의 유전자형으로 9개는 novel missense mutation이었고 1개는 novel splice site mutation이었다. 가장 많은 대립 유전자형은 R243Q와 $IVS4^{-1}$G>A로 각각 13.1%와 11.6%를 나타내었다. 전형적 페닐케톤뇨증에서는 R243Q와 $IVS4^{-1}$G>A가 각각 14.2%를 차지하였고 $BH_4$ 반응형 페닐케톤뇨증의 경우에는 R241C가 33.3%, 양성 고페닐알라닌혈증이 R241C가 40%에서 나타났다. $BH_4$ 반응형 페닐케톤뇨증의 경우에는 약물 치료만으로 조절이 되는 환자에서 T278I와 V388M mutation이 발견되었고 약물 치료만으로 조절이 되지 않고 식사요법을 병행해야하는 환자들에서만 K95del과 A447P의 돌연변이가 나타났다. 그리고 2004년 이전에는 동양인에게서 A259T 대립유전자 돌연변이가 발견되지 않은 것으로 보고되었으나 본 연구에서는 10.1%에서 발견되었다. 결 론 : 페닐케톤뇨증과 관련된 새로운 유전자 변이들이 발견되고 있으며 $BH_4$에 반응하는 유전자 변이들의 유전자형들이 확인되면서 PAH 유전자 분석은 페닐케톤뇨증 환자에서 진단, 유전상담, 식사 요법과 치료 계획 수립에 기여할 것이다.

• 한국어류학회지
• /
• 제21권1호
• /
• pp.7-14
• /
• 2009

강도다리의 수온과 체중에 따른 대사 반응을 조사하기 위해 절식한 자어(습중량, $1.5{\pm}0.4g$, 540마리)와 대형어 ($37.4{\pm}2.3g$, 90마리)를 대상으로 여섯 가지 수온(4, 7, 10, 13, 16 그리고 $19^{\circ}C$)에 따라 유수식 형태의 호흡실을 이용하여 24시간 동안 5분 간격(3반복)으로 산소 소비율(oxygen consumption rate, OCR)을 측정하였다. 수온과 체중 그리고 두 인자의 상호작용 모두가 강도다리의 산소 소비율에 유의한 영향을 미쳤다(p<0.001). 수온 상승에 따라 강도다리 자어와 치어의 산소 소비율은 모두 유의적으로 증가하였다(p<0.001). 수온 4, 7, 10, 13, 16 그리고 $19^{\circ}C$에서의 시간당 평균 산소 소비율은 자어의 경우 각각 1386.0, 1601.7, 1741.0, 1799.2, 2239.1 그리고 $2520.3mg\;O_2\;kg\;fish^{-1}\;h^{-1}$이었고, 치어의 경우 각각 83.8, 111.4, 126.3, 147.1, 187.7 그리고 $221.3mg\;O_2\;kg\;fish^{-1}\;h^{-1}$이었다. 실험 수온 조건에서 체중 증가에 따라 산소 소비율은 유의하게 감소하였다(p<0.001). 강도다리의 산소 소비율에 미치는 수온(T)과 체중(W)의 상관관계는 OCR=1520.91+40.85T-49.22W ($r^2=0.95$, p<0.001)이었다. 대사 작용에 의한 에너지 손실은 수온 증가와 체중 감소에 따라 증가하였다(p<0.001). 수온 4, 7, 10, 13, 16 그리고 $19^{\circ}C$에서 일간 평균 에너지 손실은 자어의 경우 각각 907.9, 1046.5, 1141.6, 1177.0, 1467.3 그리고 $1650.1kJ\;kg\;fish^{-1}\;d^{-1}$이었고, 치어의 경우 각각 54.8, 73.0, 82.9, 96.2, 122.9 그리고 $144.6kJ\;kg\;fish^{-1}\;d^{-1}$이었다. $Q_{10}$ 값은 $4{\sim}7^{\circ}C$, $7{\sim}10^{\circ}C$, $10{\sim}13^{\circ}C$, $13{\sim}16^{\circ}C$ 그리고 $16{\sim}19^{\circ}C$ 구간에서 자어의 경우 각각 1.62, 1.32, 1.12, 2.07 그리고 1.48이었고, 치어의 경우 2.59, 1.52, 1.67, 2.25 그리고 1.73이었다.