• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.579-582
• /
• 2003

In this paper, we propose a 4-step inference method needed for constructing a natural language communication system. The method is used to obtain fuzzy quantifier Q′when QA is Fisr τ⇔ Q′(m′A) is mF is m"is τ is inferred (Q, Q′: quantifiers, A: fuzzy subject, m′, m": modifiers, y: fuzzy predicate, τ: truth qualifier). We show that Q′is resolved step by step for two types of Q, including a non-increasing type (few,...) and a non-decreasing type(most,...).

• Journal of Korean Society for Quality Management
• /
• v.19 no.2
• /
• pp.158-165
• /
• 1991

The Q-cost has been used in the manufacturing company to decide the optimal level of company's product quality, and to evaluate the effect of company's quality control system since the advent of Q-cost theory. In spite of the following costs are generated in the user side, owing to an unsuitable level of product quality and inadequacy of company's quality control system, these costs are not usually included in the company's Q-cost : (1) the cost generated in relation to a claim proposal as traffic expeneses and transpotation of the product. (2) the cost of maintenance through the useful life of the product, especially accured after quality warranty period. (3) the cost related to the economical efficiency in using the product. (4) the cost ralated to a customer dissatisfaction for the product quality. In this point of view, the contents of user side Q-cost, and the relations between the user side Q-cost and the level of company's product quality are discussed. And then the importance of user side Q-cost in order to determine the optimal quality level is discussed.

• The KIPS Transactions:PartA
• /
• v.8A no.1
• /
• pp.1-8
• /
• 2001

This paper describes the design and implementation of C standard library for real-time operating system Q+, that is being developed for the internet appliance. The C library in the real-time operating system should be defined according to the standard interface and support the concurrent execution of threads. The implemented C standard library is reentrant and follows POSIX.l standard interface. And, the C standard library functions, which are adequate to the Q+ application and commonly provided by commercial real-time operating systems, are selected among POSIX.l standard functions. The C standard library is implemented on the Q+ kernel and D-TV set-top box according to the implementation sequence, which is determined by analyzing the relation of function calls.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.197-204
• /
• 2002

In this study, multivariate analysis based on domestic data(958 EA) of road tunnel, and suggest the easy prediction equation of Q-system. We generate applicable Q-value to numerical analysis method with using the equation and investigate the behavior as variable Q-value of rock mass induced excavation with discontinuum numerical analysis method, UDEC. In the result of the experiment, we research the application range of Q-value to apply the continuum model to discontinuous rock mass is below 0.7 and we testify the applicability of continuum model as researched Q-value with continuum numerical analysis method, FLAC.

• Applied Chemistry for Engineering
• /
• v.7 no.2
• /
• pp.379-386
• /
• 1996

Photosensitive compound, 1-methyl-4-[2-(4-diethylacetylphenyl)ethenyl] pridinium methosulfate(SbQ-A salt), was synthesized from dimethyl sulfate, terephthalaldehyde mono-(diethylacetal) and 4-picoline. SbQ-A salts were reacted with poly(vinyl alcohol)s, (PVA) in aqueous solution with phosphoric acid as catalyst to give photosensitive PVA-SbQ with different SbQ content and molecular weight. Relative photosensitivity of PVA-SbQ was determined by gray scale(GS) method. The rotative sensitivity of PVA-SbQ increased with increasing amount of bound SbQ in the case of high molecular weight(MW=77,000-79,000g/mol) as substrate and decreased with decreasing molecular weight of PVA with about constant(1.3mol%) amount of bound SbQ. The most sensitive polymer was obtained when SbQ group content in PVA-SbQ reached about 2.63mol% in the case of high molecular weight(77,000-79,000g/mol) PVA. This sample showed 90 times greater sensitivity than dichromated PVA as reference photosensitive system. PVA-SbQ photosensitive polymer synthesized was applied to the photolithographic screening process of phosphor on the panel of cathode ray tube(CRT). Phosphor slurry was made with PVA-SbQ, phosphor, a small amount of surfactant and other additives using water as medium. The slurry was coated onto panel, dried by heater, exposed to UV light and then developed by distilled water. When a small amount of cationic surfactant such as cetyltrimethylammonium chloride was used in the slurry formulation, the sharpness of phosphor pattern was equal to or better than that of dichromated PVA photosensitive polymer system used currently.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.6 s.324
• /
• pp.1-7
• /
• 2004

The development of direct receiver techniques is expected to be a solution for future wideband or multi-band wireless systems based on software defined radio. In this Paper, we study the regeneration of I and Q signals for the SDR based direct conversion receiver, so that we can handle a wide bandwidth and maintain maximal flexibility in system utilization. After modeling the basic system considering the real wireless communication environment, and studying the impact of imperfect phase imbalance on the performance of a direct conversion receiver, we propose a suboptimal I and Q signal regeneration algorithm for the system. The proposed algerian regenerates I and Q signals using a real time early-late compensator which effectively estimates phase imbalances and gives feedback in a directreceiver. The proposed algorithm is shown to mitigate the impact of AWGN and improves performance especially at low SNR channel condition. According to the computer simulation, the BER performance of the proposed system is at least about 4 dB better than conventional systems under $45{\~}55$ degrees random phase errors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5A
• /
• pp.358-366
• /
• 2012

LED-ID (Light Emitting Diode - Identification) is one of the key technologies for identification, data transmission, and illumination simultaneously. This is the new paradigm in the identification technology environment. There are many issues are still now challenging to achieve high performance in LED-ID system. Collision issue is one of them. Actually this is the most significant issue in all identification system. LED-ID system also suffers from collision problem. In our system, collision occurs when two or more readers transmit data to tag at the same time or vice versa. There are many anti-collision protocols to resolve this problem; such as: Slotted ALOHA, Basic Frame Slotted ALOHA, Query Tree, Tree Splitting, and Q-Algorithm etc. In this paper, we propose modified Q-Algorithm to resolve collision at tag. The proposed protocol is based on Q-Algorithm and used the information of arrived readers to a tag from neighbor. The information includes transmitting slot number of readers and the number of readers that can be arrived in next slot. Our proposed protocol can reduce the numbers of collision slot and the successful time to identify all readers. In this paper our simulation and theoretical results are presented.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.12
• /
• pp.1281-1287
• /
• 1990

A new thermal power plant feed-water system model, which is based on Astrom, is presented. Astrom's model has some difficulties in applying to practical systems because it is not able to measure the heat and energy transfer loss. Hence, in order to make up for these difficulties, the Gas State Equation is added to the model. Computer simulations are performed to show the validity of the new model at thermal power plant with practical boiler operating data and to verify the L.Q. controller effect on boiler drum level system.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.23 no.1
• /
• pp.43-65
• /
• 1998

This paper develops a two-echelon inventory model with time-weighted partial backorders. The presented model assumed to follow continuous review (Q. r) policy for both the retailers and the central warehouse under stochastic demand. A heuristic method to find an optimum-tending solution for total variable system cost per year incurred at the central warehouse and retailers in a system is suggested. To show the usefulness of the above model, numericla examples are illustrated for verification and validation purpose.

• Kyungpook Mathematical Journal
• /
• v.50 no.1
• /
• pp.117-122
• /
• 2010

In this paper, we introduce the concepts of 1-prime ideals and 2-prime ideals in semirings. We have also introduced $m_1$-system and $m_2$-system in semiring. We have shown that if Q is an ideal in the semiring R and if M is an $m_2$-system of R such that $\overline{Q}{\bigcap}M={\emptyset}$ then there exists as 2-prime ideal P of R such that Q $\subseteq$ P with $P{\bigcap}M={\emptyset}$.