• Korean Journal of Clinical Pharmacy
• /
• v.28 no.1
• /
• pp.57-64
• /
• 2018

Background: Patients experience significant differences in aspects of mortality, quality of life, and costs between during the year of receiving liver transplant (LT) and the subsequent years (post-LT). This study aimed to estimate the medical utilization and cost of LT for patients compared to post-LT patients by using a recent National Patient Sample (NPS) data provided by the Korean Health Insurance Review and Assessment Service (HIRA). Methods: This study used a subset of the 2015 HIRA-NPS. Patient claims data that included Z944 (Korean Standard Classification of Diseases code for LT status) were selected. Within the selected data, LT patients were identified based on whether the national health insurance number code of Q80 (procedure code for LT surgery) was included, and they were compared to post-LT patients. Results: In the analysis, 330 patients were included. The average cost per patient was $90,066{\pm}36,959$ thousand KRW and $10,557{\pm}9,668$ thousand KRW for LT and post-LT patients, respectively. Especially, LT patients' costs for injection/procedure, surgery/treatment, and examination were higher than other costs, being $35,983{\pm}18,115$ thousand KRW, $28,246{\pm}9,408$ thousand KRW, and $12,131{\pm}6,604$ thousand KRW, respectively. For inpatients, the average number of hospitalized days was $63.5{\pm}66.0$ days for LT patients and $22.3{\pm}35.1$ days for post-LT patients. Conclusion: Compared to post-LT patients, LT patients had higher costs, especially for injection/procedure, surgery/treatment, and examination. Additionally, the LT group had longer hospitalization duration and higher costs for their hospital admission, whereas they did not show a significant difference in number of visits and medical costs for outpatient-care.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.155-162
• /
• 2001

Recently, in Korea, a few construction companies have been tried to develop a management system, which is able to integrate schedule and cost. In spite of these attempts, however, advanced management techniques can be hardly applied under the BoQ based management system. In order to improve these problems, many studies have been peformed, but yet could not overcome practical limitations. Besides, the application of historical data is below the level since it is so difficult to accumulate and feed-back historical data under the unique character of construction industry. Consequently, lots of time and effort have being wasted to establish control criteria. The newly generated Information is not systematically managed as well. Therefore, this study suggests Integrated Construction Management System complemented the existing practical problems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.12
• /
• pp.4682-4705
• /
• 2020

The Unmanned Aerial Vehicles (UAV) networks consisting of low-cost UAVs are very vulnerable to smart jammers that can choose their jamming policies based on the ongoing communication policies accordingly. In this article, we propose a novel cloud and edge-aided mobile communication scheme for low-cost UAV network against smart jamming. The challenge of this problem is to design a communication scheme that not only meets the requirements of defending against smart jamming attack, but also can be deployed on low-cost UAV platforms. In addition, related studies neglect the problem of decision-making algorithm failure caused by intermittent ground-to-air communication. In this scheme, we use the policy network deployed on the cloud and edge servers to generate an emergency policy tables, and regularly update the generated policy table to the UAVs to solve the decision-making problem when communications are interrupted. In the operation of this communication scheme, UAVs need to offload massive computing tasks to the cloud or the edge servers. In order to prevent these computing tasks from being offloaded to a single computing resource, we deployed a lightweight game algorithm to ensure that the three types of computing resources, namely local, edge and cloud, can maximize their effectiveness. The simulation results show that our communication scheme has only a small decrease in the SINR of UAVs network in the case of momentary communication interruption, and the SINR performance of our algorithm is higher than that of the original Q-learning algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.225-228
• /
• 2008

In this paper, we presented our implementation of a counter mode AES based on Virtex4 FPGA. Our design exploits three advanced features: composite field arithmetic SubByte, efficient MixColumn transformation, and On-the-Fly Key-Scheduling for fully pipelined architecture. By pipelining the composite field implementation of the S-box, the area cost is reduced to average 17 percent. By designing the On-the-Fly key scheduling, we implemented an efficient key-expander module which is specialized for a pipelined architecture.

• Journal of information and communication convergence engineering
• /
• v.9 no.6
• /
• pp.652-656
• /
• 2011

In this paper, a transmitter-based multipath processing and inter-channel interference (ICI) cancellation scheme for a ultra-wideband (UWB) spatial multiplexing (SM) multiple input multiple output (MIMO) system is presented. It consists of taps delayed lines and zero-forcing (ZF) filters in the transmitter and correlators in the receiver. For a UWB SM MIMO system with N transmit antennas, M receive antennas, and Q resolvable multipath components, the BER performance of a linear transmit ZF scheme is analyzed in a log-normal fading channel and also compared with that of a receiver-based ICI rejection approach. It is found that when M ${\leq}$ N, the transmit ZF processing approach outperforms the ZF receiver while making the mobile units low-cost and low-power.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.1
• /
• pp.85-89
• /
• 2012

This study has been conducted to compare two cargo handling systems on MR tanker and Panamax tanker. Submerged hydraulic cargo pumps with hydraulic power packs and frequency converter controlled electric deepwell pumps will be investigated and compared on all aspects of initial cost, installation, operation and maintenance. The result of investigation shows Electric Systems have less manufacturing costs, higher environmental friendliness and reliable operation compare to Hydraulic Systems. Furthermore, the present experimental data will provide important database for Electric Systems onboard new ships and practical and empirical guidelines are constructed for further determine the design of the Electric Systems.

• Journal of Korean Society for Quality Management
• /
• v.18 no.2
• /
• pp.9-17
• /
• 1990

This paper deals with a FOQ( ; fixed-order quantity) model for spare-part inventory control. In a spare-part inventory problem, stock depletion arises not from external market demand but from internal demand resulting from failures of parts in use. The problem differs from the classical inventory problem in that the demand for a failed part never arises more during stockout period, since the unit remains inoperative when stockout occurs until the failed part is replaced by new one. In the problem under consideration, n identical units are operating simultaneously and failed one is replaced immediately by new one if on-hand spares remain. In order to replenish spares, an order with quantity Q is placed whenever the number of on-hand spares falls to levels. The average annual cost of operating the spare-part inventory system is derived under the assumption that both lifetime of a part and replenishment lead-time distributions are exponential.

• Elastomers and Composites
• /
• v.52 no.4
• /
• pp.303-308
• /
• 2017

In this study, finite element modeling and material property tests are performed for the finite element analysis of rubber isolator parts which support the engine and isolate the vibration. As a result of the P direction analysis of the rubber isolator parts, the static stiffness in the P direction was 44.2 kg/mm, which is well within the error of 5% as compared with the test result of 46.1 kg/mm. The static stiffness of the rubber isolator parts in the Q direction was calculated to be 7.9 kg/mm, which is comparable to the test result of 8.6 kg/mm, with an error of less than 8%. As a result of the analysis on the Z direction, the static stiffness was calculated as 57.7 kg/mm, and the test results were not available. Through this study, it is expected that the time and cost for prototype development can be reduced through nonlinear finite element analysis for rubber isolator parts.

• Journal of Engineering Education Research
• /
• v.2 no.1
• /
• pp.24-28
• /
• 1999

The information technology is becoming very essential in our daily lives. Internet environment, especially, has been seriously affecting the area of education. The cost-effectiveness analysis is required as universities are investing quite much in the development of internet infrastructure. This study shows a simple statistical result on the utilization of internet equipments. It is found that the enough availability is not provided to the students who are going to use equipments for the purpose of study as a big portion of them are occupied by the users for the purpose of amusement.

• The Journal of Engineering Geology
• /
• v.28 no.1
• /
• pp.1-9
• /
• 2018

We propose a borehole test technique to estimate permeability of rocks in borehole. The borehole tests are hydraulic injection tests such as leak-off test and hydraulic fracturing tests, which are originally conducted for stress or casing integrity assessment and not for permeability measurement. We use one-dimensional radial diffusion equation to interpret fluid injection test results in terms of permeability. We apply this technique to a leak-off test conducted at a depth of 700 m in a wellbore, where rock formation is mudstone. The estimated permeability is at an order of $10^{-16}m^2$, which is somewhat high but within the range reported for mudstones previously. Quantitative rick assessment suggests that an accurate measurement of open hole section length is important to improve reliability of results. More data may be needed to ensure the reliability of this technique. If validated, however, this technique can provide cost-effective estimation of in situ permeability without conducting independent permeability tests in borehole.