• 대한통합의학회지
• /
• 제11권1호
• /
• pp.149-157
• /
• 2023

Purpose : Genu varum is a condition characterized by a wider than normal gap between. This may be due to muscle weakness caused by poor posture, lifestyle, or lack of exercise. This study aimed to compare the effects of ball-based squats and narrow squats on muscle thickness, Q-angle, and the gap between the knees, in order to assess the potential for improving this condition. Methods : Twenty six adult participants with genu varum were randomly assigned to either a ball-based squat group (n=13) or a narrow squats group (n=13). Both groups performed their respective exercises three times weekly for 4 weeks. The data was analyzed using paired t-tests to compare pre- and post- intervention measurements within each group, and independent t-test was used to compare the two groups. Results : Both groups showed significant improvement in the thickness of the vastus lateralis and medialis, and rectus femoris muscles, as well as a significant decrease in the gap between the knees (p<.05). However, there was no significant difference in Q-angle variation between the two group. Furthermore, there was no significant differences in the Q-angle, gap between the knees, and muscle thickness variation between both groups. Conclusion : The results suggest that both ball-based squats and narrow squats are effective in improving muscle thickness and reducing the gap between the knees in adults with genu varum. However, there was no significant difference between the two types of squats in terms of their effects on the Q-angle. These findings highlight the potential for exercise interventions to address this common postural issue.

• 대한기계학회논문집B
• /
• 제23권11호
• /
• pp.1390-1398
• /
• 1999

A numerical analysis for ROT sparger of PWR(Pressurized Water Reactor) is carried out. Computation is performed to investigate the flow characteristics as the change of design factor. As the result of this study, RDT sparger's flow resistance coefficient is K=3.53 at the present design condition if engineering mar&in is considered with 20%, and flow ratio into branch pipe is $Q_s/Q_i=0.41$. Velocity distribution at exit is not uniform because of separation in branch pipe. In the change of inlet flow rate and section area ratio of branch pipe for main pipe, flow resistance coefficient is increased as $Q_s/Q_i$ decreasing, but in the change of branch angle and outlet nozzle diameter of main pipe, flow resistance coefficient is decreased as $Q_s/Q_i$ decreasing. As the change rate of $Q_s/Q_i$ is the larger, the change rate of flow resistance coefficient is the larger. The change rate of pressure loss is the largest change as section area ratio changing. The optimal design condition of sparger is estimated as the outlet nozzle diameter ratio of main pipe is $D_s/D_i=0.333$, the section area ratio is $A_s/A_i=0.2$ and the branch angle is ${\alpha}=55^{\circ}$.

• 한국진공학회지
• /
• 제14권3호
• /
• pp.126-131
• /
• 2005

소각중성자산란 (Small-angle neutron scattering, SANS)은 물질의 내부 나노구조 분석에 매우 중요한 실험방법론이다. 본 논문에서는 30MW HANARO 연구용 원자로의 냉중성자 연구시설에 설치하기 위하여 한국과학기술원과 한국원자력연구소가 공동으로 개발 중인 40m SANS장치의 개념설계 결과를 보고한다. 장치의 설계 최적화를 위한 전산모사를 수행하였으며, 이를 바탕으로 40m SANS 장치의 주요설계 인자를 결정하였다. 40m SANS 장치의 가능한 Q-range는 $0.0005\;\AA^{-1}-1.0\AA^{-1}$ 이며, 이는 세계 최고 수준의 SANS Q-range에 해당된다. 각 Q-range에 따른 시료위치에서의 중성자 속을 계산하였으며 전산모사에 사용된 냉중성자원이 구현될 시 세계적 수준의 값을 얻을 수 있을 것으로 예상된다.

• 대한정형도수물리치료학회지
• /
• 제28권1호
• /
• pp.19-27
• /
• 2022

Background: This study investigated the effects of a single-leg hopping test and Q-angle when applying Mulligan taping, flossing bands, and a combination of Mulligan taping and flossing bands to chronic ankle instability (CAI) patients. Methods: The subjects of the study were 68 patients with chronic ankle instability, randomly divided into three groups receiving the following treatments: Mulligan taping (n=22), flossing bands (n=23), and a combination of Mulligan taping and flossing bands (n=23). The immediate effects of the treatments were evaluated using the single-leg hopping test and Q-angle measurement for functional movement before and after the intervention. Results: All three groups showed significant improvements in the single-leg hopping test after the intervention, and there was a significant difference between the performance of the simultaneous application group and the Mulligan taping group (p<.01). As a result of the post-hoc test, there was a significant difference in the simultaneous application group than in the mulligan taping group (p<.01). When measuring the Q-angle change during the activity of descending stairs, there was also a significant effect in all three groups, with no significant differences when comparing the changes between groups (p>.05). Conclusions: In conclusion, Mulligan taping and flossing bands were confirmed as effective interventions for the functional movement of the lower extremities in patients with CAI. This study can provide basic data on the effectiveness of interventions in patients with CAI.

• Archives of Plastic Surgery
• /
• 제41권4호
• /
• pp.344-349
• /
• 2014

Background An abnormally obtuse cranial base angle, also known as platybasia, is a common finding in patients with 22q11.2 deletion syndrome (22q11DS). Platybasia increases the depth of the velopharynx and is therefore postulated to contribute to velopharyngeal dysfunction. Our objective was to determine the clinical significance of platybasia in 22q11DS by exploring the relationship between cranial base angles and speech resonance. Methods In this retrospective chart review at a tertiary hospital, 24 children (age, 4.0-13.1 years) with 22q11.2DS underwent speech assessments and lateral cephalograms, which allowed for the measurement of the cranial base angles. Results One patient (4%) had hyponasal resonance, 8 (33%) had normal resonance, 10 (42%) had hypernasal resonance on vowels only, and 5 (21%) had hypernasal resonance on both vowels and consonants. The mean cranial base angle was $136.5^{\circ}$ (standard deviation, $5.3^{\circ}$; range, $122.3-144.8^{\circ}$). The Kruskal-Wallis test showed no significant relationship between the resonance ratings and cranial base angles (P=0.242). Cranial base angles and speech ratings were not correlated (Spearman correlation=0.321, P=0.126). The group with hypernasal resonance had a significantly more obtuse mean cranial base angle ($138^{\circ}$ vs. $134^{\circ}$, P=0.049) but did not have a greater prevalence of platybasia (73% vs. 56%, P=0.412). Conclusions In this retrospective chart review of patients with 22q11DS, cranial base angles were not correlated with speech resonance. The clinical significance of platybasia remains unknown.

• 재활복지공학회논문지
• /
• 제10권1호
• /
• pp.37-45
• /
• 2016

이 연구의 목적은 래스터입체사진술이 적용된 ABW-mapper를 사용하여 얻은 관상면 상에서의 하지 정렬 측정에 대하여 측정자 내, 측정자 간, 측정-재측정 간 각각의 신뢰도와 타당도를 조사하고 평가하는 것이다. 열여덟 명의 대상자가 이 연구에 참여하였다. 일주일간격으로 두 번의 세션에 걸쳐서 두 사람의 측정자가 각각 ABW-mapper를 사용하여 기립자세에서의 S각(입체사진 각-래스터입체사진 촬영을 통해 측정한 관상면상의 하지 정렬 측정 각)을 측정하였고, 첫 번째 세션에서는 짧은 시간 간격으로 한 측정자가 같은 대상자에 대하여 두 번씩 측정하였다. Q각은 디지털카메라로 기립자세를 촬영한 사진에서 고니어미터로 측정하였다. HKA각은 컴퓨터 기반 디지털 방사선 영상사진 위에서 측정 소프트웨어를 사용하여 측정하였다. 급내상관계수(ICC)를 통해 신뢰도를 분석하였고, 피어슨 상관계수를 사용하여 타당도를 검사하였다. 그 결과, S각 측정은 매우 높은 측정자 내 (ICC=0.956~0.974), 측정자 간 (ICC=0.962) 검사-재검사 간 (ICC=0.945) 신뢰도를 나타냈으며, S각과 Q각, S각과 HKA각 사이에는 강한 음의 상관관계(각각 r=-0.739, -0.702)를 나타냈다. 따라서, ABW-mapper에 의한 래스터입체사진법을 통한 S각 측정은 관상면에서의 하지정렬의 측정에 대하여 Q각이나 HKA각 측정에 관련하여 예비적 또는 보완적 도구로 사용될 수 있을 것이라 생각된다.

• 한국산학기술학회논문지
• /
• 제16권3호
• /
• pp.2064-2072
• /
• 2015

본 연구는 탄성밴드운동과 스트레칭을 이용한 내반슬 교정운동프로그램이 내반슬 대학생의 무릎간 간격, Q-각, 족압에 미치는 영향에 대해 알아보는데 그 목적이 있다. 총 30명의 내반슬 대학생을 대상으로 실험군과 대조군을 각각 15명씩 무작위 선정하여 실험군은 6주 동안 스트레칭과 탄성밴드를 이용한 교정 운동 프로그램을 실시하였고, 대조군은 일상생활을 유지하게 하였다. 중재 전 후 무릎사이 간격과 Q-각의 변화를 알아보기 위해서 computed radiography X-ray를, 족압 분포변화를 확인하기 위해 RSscan을 사용하여 족압 분포를 측정하였다. 6주간의 교정운동프로그램 실시한 결과, 중재 전보다 중재 후 무릎간 간격이 유의하게 감소하였고, Q-각은 유의하게 증가하였다. 족압 분포는 중재 후에 2-5 지골과 1, 2, 3 중족골 족압이 증가하였으며, 4, 5 중족골 족압은 유의하게 감소하였다 (p<.05). 이러한 결과를 바탕으로 본 연구에서 실시한 내반슬 교정운동프로그램이 신체의 정렬과 족압 분포도의 배열을 맞추는데 효과가 있으며, 이를 통해 내반슬 변형자에게 긍정적인 효과가 있음을 확인하였다.

• 한국전문물리치료학회지
• /
• 제12권2호
• /
• pp.11-19
• /
• 2005

Patellofemoral pain syndrome (PFPS) is often attributed to malalignment and maltracking of patella within the patellofemoral joint. Most exercise for PFPS has focused on selectively strengthening the vastus medialis oblique muscle (VMO). This study was designed to identify the effect of medial, lateral wedge and difference of Quadriceps angle (Q-angle) on vastus medialis oblique/vastus lateralis muscle (VL) activity ratios. The subjects were twenty young adult males who had not experienced any knee injury. They were asked to perform isometric contraction exercises in three postures using medial and lateral wedge. The EMG activity of the VL and VMO were recorded in three postures by surface electrodes and normalized by %MVC values derived from seated, isometric knee extensions. The normalized EMG activity levels (%MVC) of the VL and VMO for the three postures of the lower extremities were compared using 2-way repeated measures ANOVA with 1 between-subject factor (group), and 1 within-subject factor (wedge). Results of repeated measures of ANOVA's revealed that the medial wedge isometric contraction exercise produced significantly greater EMG activity of VMO/VL ratios in Group I (Q-angle $18^{\circ}$ or less) (p<.05). But, the medial wedge isometric contraction exercise was no significant difference of VMO/VL ratios in Group II (Q-angle $19^{\circ}$ or more) (p>.05). These results have important implications for selective VMO muscle strengthening exercises in PFPS patients.

• Steel and Composite Structures
• /
• 제42권6호
• /
• pp.791-804
• /
• 2022

As a type of semi-rigid connection, the top and seat angle connections are popular in current structures owing to their good cyclic performance and simple erection. However, their stiffness and load bearing capacity are relatively insufficient. This study proposes two strengthening methods to further increase the stiffness and strength of bolted-angle joints while maintaining satisfactory energy dissipation capacity (EDC) and ductility. Cyclic loading tests were conducted on six joint specimens with different strengthened angle components. Based on the test results, the influence of the following important factors on the cyclic behavior of steel joint specimens was investigated: the position of the rib stiffeners (edge rib stiffeners and middle rib stiffener), steel strength grade of rib stiffeners (Q345 and Q690), and additional stiffeners or not. In addition, the finite element models of these specimens were built and validated through a comparison of experimental and numerical results. The stiffness and bearing capacity of the bolted-angle joints could be improved significantly by utilizing the novel strengthened joints proposed in this study. Moreover, this can be achieved with almost no increase in the amount of steel required, and the EDC of this joint could also satisfy the requirements of seismic codes from various countries.

• 한국인공지능학회지
• /
• 제11권4호
• /
• pp.15-20
• /
• 2023

Machine learning is comprised of supervised learning, unsupervised learning and reinforcement learning as the type of data and processing mechanism. In this paper, as input and output are unclear and it is difficult to apply the concrete modeling mathematically, reinforcement learning method are applied for crawling robot in this paper. Especially, Q-Learning is the most effective learning technique in model free reinforcement learning. This paper presents a method to implement a crawling robot that is operated by finding the most optimal crawling method through trial and error in a dynamic environment using a Q-learning algorithm. The goal is to perform reinforcement learning to find the optimal two motor angle for the best performance, and finally to maintain the most mature and stable motion about EV3 Crawling robot. In this paper, for the production of the crawling robot, it was produced using Lego Mindstorms with two motors, an ultrasonic sensor, a brick and switches, and EV3 Classroom SW are used for this implementation. By repeating 3 times learning, total 60 data are acquired, and two motor angles vs. crawling distance graph are plotted for the more understanding. Applying the Q-learning reinforcement learning algorithm, it was confirmed that the crawling robot found the optimal motor angle and operated with trained learning, and learn to know the direction for the future research.