• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.283-285
• /
• 1997

We have obtained disordered carbon by pyrolyzing PPP in a nitrogen atmosphere for 8 hour at 700$^{\circ}C$. AC impedance property was measured with the PPP-based carbon/EC-DEC/Li cell. The impedance spectra of the cell were measured during the 1st discharge proceed. As the result of measurement the cell resistance decreased in intial discharge, but increase in final discharge.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1331-1335
• /
• 2010

A novel spherical carbon composite material, in which nanosized disordered carbons are dispersed in a soft carbon matrix, has been prepared and investigated for use as a potential anode material for lithium ion batteries. Disordered carbons were synthesized by ball milling natural graphite in air. The composite was prepared by mixing the ball-milled graphite with petroleum pitch powder, pelletizing the mixture, and pyrolyzing the pellets at $1200^{\circ}C$ in an argon flow. The ballmilled graphite consists of distorted nanocrystallites and amorphous phases. In the composite particle, nanosized flakes are uniformly distributed in a soft carbon matrix, as revealed by X-ray diffractometer (XRD) and transmission electron microscopy (TEM) experiments. The composite is compatible with a pure propylene carbonate (PC) electrolyte and shows high rate capability and excellent cycling performance. The electrochemical properties are comparable to those of hard carbon.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.70-73
• /
• 1997

The purpose of this study is to research and develop poly(p-phenylene)(PPP)-based carbon obtained by pyrolyzing electrochemically prepared PPP as a anode of rocking chair batteries. Disordered carbon materials were obtains by heat-treating of PPP films in a nitrogen atmosphere at 4$0^{\circ}C$ to 110$0^{\circ}C$ for 1 hour. The carbon prepared by heat treatment showed a broad x-ray diffraction peak having characteristics of disordered carbon. Carbon electrodes were charged and discharged at a current density of 0.1㎃/$\textrm{cm}^2$. First discharge capacity of 267㎃h/g and 34% of charge/discharge efficiency were observed from PPP-based carbon prepared at $700^{\circ}C$.

• 설비공학논문집
• /
• 제6권3호
• /
• pp.267-281
• /
• 1994

The Combustion gas behavior induced by fire in a building is numerically investigated. The typical building for this analysis is partially divided by a vertical baffle projecting from the ceiling. The solution procedure includes the low Reynolds number ${\kappa}-{\varepsilon}$ model for the turbulent flow and the discrete ordinates method is used for the calculation of radiative heat transfer equation. The effects of the location and size of fire source and baffle length on velocity and temperature distributions, species mass fraction and flame location are analyzed. As the results of this study, it is found that the case when the fire source is located at the vertical wall is more dangerous than at the bottom wall in view of the combustion products and flame location. It is also found that the radiation effect cannot be neglected in analyzing the building in fire.

• 한국전기전자재료학회논문지
• /
• 제23권8호
• /
• pp.660-666
• /
• 2010

Carbon aerogels are promising materials as electrodes for electrical double layer capacitors (EDLCs). An optimum process is presented for synthesis of nanoporous carbon aerogels via pyrolyzing resorcinol-formaldehyde (RF) organic aerogels, which could be cost-effectively manufactured from RF wet gels. The major reactions between resorcinol and formaldehyde include an addition reaction to form hydroxymethyl derivatives ($-CH_2OH$), and then a condensation reaction of the hydroxymethyl derivatives ($-CH_2-$)- and methylene ether ($-CH_2OCH_2-$) bridged compounds. The textural properties of carbon aerogels obtained were characterized by nitrogen adsorption/desorption analysis and SEM and TEM. The application of the resultant carbon for electrodes of electric double layers capacitor (EDLC) in organic TEABF4/ACN electrolyte indicated that the ESR, as low as 55 $m{\Omega}$, was smaller than for commercially activated carbons. And EDLC with carbon Aerogel electrodes has an excellent stable more than for commercially activated carbons.

• 농업과학연구
• /
• 제46권4호
• /
• pp.931-939
• /
• 2019

Biochar is a solid carbon material made by pyrolyzing a biomass under limited oxygen conditions. Biochar has been reported to confer various benefits, such as increased soil productivity, pollutant absorption, and reduced greenhouse gas. In this study, oak pyrolyzed at 600℃ for 3 hours was either powdered or pelleted. Each of the biochar types was added to the soil at a rate of 2%. The control did not receive any biochar while a combination of the biochar and NPK treatment (biochar 2% + NPK) was also included. The cherry tomatoes were grown in greenhouse pots for 50 days to compare the growth characteristics of the different treatments. The cherry tomato with the powdered biochar 2% + NPK treatment had the heaviest plant fresh shoot weight of 276.4 g and the highest chlorophyll content of 59.3 SPAD. The control had the lightest plant fresh shoot weight of 44.2 g and a chlorophyll content of 26.5 SPAD. Both forms of biochar affected the chemical properties of the soil, increased the pH, electrical conductivity, available phosphate, total carbon and total nitrogen and positively influenced the cherry tomato growth and productivity. From the above results, therefore, both biochar forms are suited for use as soil amendments.

• 농업과학연구
• /
• 제48권3호
• /
• pp.589-596
• /
• 2021

Nitrogen applied to soil is highly prone to leaching and volatilization leading to gaseous emissions of nitrous oxide (N₂O) and ammonia (NH₃) which are of great environmental concern. Usage of biochar to reduce the discharge of nitrogen to the environment has attracted much interest in the recent past. Biochar is produced by pyrolyzing various biomasses under oxygen-limited conditions. Biochar is a carbonized material with high adsorptive powers for not only plant nutrients but also heavy metals. The objective of this study was to investigate the adsorption characteristics of NH₄-N onto biochar made from pine needles. The biochar was produced at various pyrolysis temperatures including 300, 400 and 500℃ and holding times of 30 and 120 minutes. The Langmuir isotherm was used to evaluate the adsorption test results. The chemical properties of the biochar varied with the pyrolysis conditions. In particular, the pH, EC and total carbon content increased with the increasing pyrolysis conditions. The rate of adsorption of NH₄-N by the biochar decreased with the increasing pyrolysis conditions. Of these conditions, biochar that was pyrolyzed at 300℃ for 30 minutes showed the highest adsorption rate of approximately 0.071 mg·g^-1. Thus, the use of biochar pyrolyzed at low temperatures with a short holding time can most efficiently reduce ammonia emissions from agricultural land.

• 한국환경보건학회지
• /
• 제13권1호
• /
• pp.17-33
• /
• 1987

As a result of technical advances and industrialization, the characteristics of domestic and industrial wastes are becoming more complex. Accordingly, improved treatment and disposal systems are being continuously sought to take account of complex characteristics and to comply with economic restrictions. In this study, an application of pyrolysis to the treatment of industrial wastes, including waste scrap rubber, waste raw material used in making the slipper bottom and waste PVC pipe, and the effectiveness of pyrolysis in resource recovery from these wastes were investigated. Batches of wastes were pyrolysed by external heating to a temperature of 400-800$\circ$C in a 32 mm diameter x 0.9 m long silica tube to produce combustible gases, oils and chars. Before the start of pyrolysis runs, the entire system was purged with nitrogen gas to exclude the air. The temperature inside the retort was controlled by the thermocouple in the gas stream, and referred to as the pyrolysis temperature. Under these conditions three products were separately collected and further analyzed. The results were summarized as follows. 1. More gases and less chars were produced with higher pyrolyzing temperature and with higher rates of heating, but the yields of oils tended downwards at temperatures above 700$\circ$C. Accordingly, operating conditions of pyrolysis should be varied with desired material. 2. Calorific values and sulfur contents of produced oils were sufficient and suitable for fuel use. Chars from waste rubber had high heating values with low sulfur contents, but calorific values of chars from waste PVC and waste slipper were as low as 3, 065-4, 273 kcal/kg and 942-2, 545 kcal/kg, respectively. Therefore, char from these wastes are inappropriate for fuel. 3. Soluble contents of Pb, Cd, Cu and Zn in chars from waste rubber and waste slipper were below the Specific Hazardous Waste Treatment Standards. However soluble contents of Pb and Cd in chars from waste PVC were one or two times and five or seven times exceedingly the Specific Hazardous Waste Treatment Standards, respectively. 4. Post high heating is desirable for treatment method of waste PVC which generates toxic hydrogen chloride. 5. The proportions of hydrogen, methane and ethane in produced gases were in the range of 3.99-35.61% V/V, 18.22-32.50% V/V and 5.17-5.87% V/V, respectively. 6. Pyrolysis is a useful disposal method in case of waste slipper, which was hardly combustible, and thus investigations of this kind of materials are required for effective management of industrial waste. 7. Based upon the possible market development for products, overall pyroly economics to take account of treatment values of noncombustible or hazardous materials should be evaluated.

• 대한환경공학회지
• /
• 제37권7호
• /
• pp.432-440
• /
• 2015

유기물의 열분해로 생성되는 바이오차는 토양 탄소 저장량을 증가시킴으로써 기후변화를 완화할 수 있는 전략으로 소개되고 있다. 또한 바이오차는 토양의 흡착능을 증대시켜 중금속으로 오염된 토양을 정화할 수 있다고 보고된다. 본 연구는 두 종류 바이오차의 토양 중금속 제거 효과와 함께 기후변화 완화효과를 동시에 알아보기 위해 수행되었다. 두 종류의 바이오차는 가시박 및 차 찌꺼기 바이오매스를 열분해 하여 준비했다. 납으로 오염된 농경지 토양은 바이오차 및 바이오매스와 혼합되어 60일 동안 배양하였다. $CO_2$, $CH_4$, $N_2O$는 배양 기간 동안 주기적으로 측정되었고 토양 분석은 배양 종료 후 아세트산을 이용한 납 추출량을 비롯한 생화학적 요소에 대해 수행하였다. 그 결과, 배양 후 납의 양은 BC_Ch에서 71% 만큼 감소했다. 배양 중 $CO_2$와 $N_2O$ 발생은 BC_Ch, TW_Ch에서 각각 BC_Bm, TW_Bm 대비 약 24%, 34% 감소하였다. $CH_4$ 발생은 바이오차 처리에 의한 유의한 차이를 나타내지 않았다. GWP 계산 과정에서 온실가스($CO_2$, $CH_4$, $N_2O$), 토양에 처리한 가시박 및 차 찌꺼기 바이오매스와 바이오차, 토양 내 총 탄소량을 고려하였으며, 바이오차 투입으로 토양 내 납의 농도가 감소한 BC_Ch를 제외한 나머지 처리구와 대조구에 제올라이트를 투입하였다고 가정하여 GWP 계산을 수행하였다. BC_Ch가 GWP 측면에서 가장 유리한 것을 보였는데, 이는 가시박 바이오차가 높은 납 흡착과 토양 내 탄소 격리 효과를 나타냈기 때문으로 사료된다. 결론적으로, 가시박으로부터 생성한 바이오차를 투입하는 것이 토양 오염 저감과 기후변화 완화 효과를 동시에 기대할 수 있는 전략임을 시사한다.