• 자원리싸이클링
• /
• 제15권1호
• /
• pp.12-19
• /
• 2006

볏짚은 국내에서 유용한 재생 가능한 바이오매스이다. 유동층과 char 분리 장치가 구비된 급속 열분해 장치를 이용하여 볏짚으로부터 바이오오일의 생산에 대한 실험을 수행하였다. 본 연구는 온도변화에 따른 볏짚의 열분해 생성물의 분포와 생성물의 화학적 구성을 알아보고 바이오오일의 활용 가능성을 고찰하고자 했다. 급속 열분해 반응은 $466^{\circ}C,\;504^{\circ}C,\;579^{\circ}C$에서 각각 수행되었다. 유동화 매체로는 생성가스를 사용하였으며 유량은 약 30NL/min 였다. 볏짚의 열분해 결과 기체, 액체, 고체 물질을 얻을 수 있었으며, 기체물질은 GC(TCD, FID)를 이용하여 정성적, 정량적 분석을 하였다. 액체물질은 상등액과 tar가 풍부한 하등액으로 분리하여 발열량, 원소분석, 수분, GC/MS를 통해 화학구성성분을 분석하였다. 고체물질인 char는 원소분석을 하고 그 발열량을 측정하였다. 액체물질인 바이오오일은 화학특성 분석결과 대체 연료유뿐만 아니라 화학 원료물질로서의 사용가능성을 볼 수 있었다.

• Environmental Engineering Research
• /
• 제17권3호
• /
• pp.157-165
• /
• 2012

This experimental study was performed to obtain thermal energy from the combustion of synthetic gas, produced by the pyrolysis of insulating oil containing polychlorinated biphenyls (PCBs) in a high temperature and high pressure reactor. The average synthetic gas generated was $59.67Am^3/hr$ via the steady state gasification of insulating oil waste (20 kg/hr) with average concentrations (standard deviation) of $CO_2$, CO, and $H_2$ in the synthetic gas of $38.63{\pm}3.11%$, $35.18{\pm}1.93%$, and $28.42{\pm}1.68%$, respectively. The concentrations of the PCBs in the transformer insulating oil and synthetic gas after its gasification, and the concentrations of the dioxins that could be produced from the incomplete degradation of PCBs were measured. It was revealed that the PCBs in the insulating oil were composed of the series from tetrachlorobiphenyl to octachlorobiphenyl. However, only the #49, #44, #52, and #47/75/48 congeners were detected from the synthetic gas after gasification of the insulating oil and in the flue gas from the combustor. In conclusion, the experimental conditions suggested in this study were very useful for the appropriate treatment of insulating oil containing PCBs. Also, fuel gas containing CO and $H_2$ can be obtained from the pyrolysis of insulating oil containing PCBs.

• Environmental Engineering Research
• /
• 제25권4호
• /
• pp.522-528
• /
• 2020

To achieve the clean and efficient utilization of low-rank coal, the combustion and pollutant emission characteristics of chars from low-temperature and fast pyrolysis in a horizontal tube furnace were investigated in a TG-MS analyzer. According to the results, the combustion characteristic of chars was poorer than its parent coals. The temperature range of gaseous product release had a good agreement with that of TGA weight loss. Gaseous products of samples with high content of volatile were released earlier. The NO and NO₂ emissions of chars were lower than their parent coals. Coals of high rank (anthracite and sub-bituminous) released more NO and NO₂ than low rank coals of lignite, so were chars from coals of different ranks. SO₂ emissions of char samples were lower than parent coals and did not show obvious relationship with coal ranks.

• 한국응용과학기술학회지
• /
• 제32권1호
• /
• pp.148-156
• /
• 2015

시료의 입경 및 투입량 차이에 따른 바이오오일의 특성변화를 알아보기 위하여 0.5~2.0 mm 크기의 굴참나무(Quercus variabilis) 시료 300~900 g을 $465^{\circ}C$에서 1.6초 동안 급속열 분해하여 바이오오일을 제조하였다. 입경 및 투입량 차이에 따른 열분해 생성물의 수율변화에는 눈에 띠는 경향은 없었지만, 바이오오일 수율이 가장 많아 약 60.3~62.1%를 차지하였고, 미응축가스, 바이오차 순이었다. 바이오오일을 냉각관으로 응축하여 얻은 1차 바이오오일과 전기집진장치로 얻은 2차 바이오오일로 구분하여 수율을 측정한 결과, 1차 바이오오일의 수율이 2차 바이오오일 수율의 약 2배 이상을 나타내었다. 그러나 발열량은 2차 바이오오일이 1차 바이오오일 보다 약 2배 이상 높았으며, 최대 5,602 kcal/kg을 나타내었다. 1차 바이오오일의 수분함량이 20%이상으로 2차 바이오오일의 수분함량 10% 이하였다. 또한 2차 바이오오일의 원소분석 결과, 1차 바이오오일보다 탄소함량이 높고, 산소함량이 낮았기 때문에 수분함량과 원소조성 특성도 발열량에 영향을 미치는 것으로 판단된다. 바이오오일의 저장온도가 높을수록 또는 저장기간이 길수록 점도가 증가하며, 2차 바이오오일의 점도 증가 정도가 1차 바이오오일보다 컸는데, 저장기간 중에 바이오오일 성분 간의 화학적 결합에 의한 바이오오일의 고분자화가 진행되는 것으로 판단된다.

• 한국응용과학기술학회지
• /
• 제33권1호
• /
• pp.75-82
• /
• 2016

급속열분해 기술은 바이오매스를 수송용 연료와 고품질의 석유화학 생산물로 업그레이드 할 수 있는 바이오오일을 만드는 유망한 수단으로 주목 받고 있다. 이러한 기대에도 불구하고 연료와 석유화학 생산물의 상업성은 바이오오일의 높고 잘 변하는 점도, 많은 수분과 산소 함량, 낮은 발열량 및 산성도와 같은 상당히 바람직하지 않은 특징 때문에 한계가 있다. 그래서 본 연구는 가압증류를 통해 바이오오일의 품질 개선을 목표로 수행하였다. 가압증류에 따른 바이오오일의 특성 변화를 알아보기 위하여 0.8~1.4 mm 크기의 굴참나무(Quercus variabilis) 시료 600 g을 $465^{\circ}C$에서 1.6초 동안 급속열분해하여 바이오오일을 제조하고, 감압증류(100hPa) 온도는 대조구, $40^{\circ}C$, 50, 60, 70 및 80에서 각각 30분간 처리하였다. 급속열분해를 통해 생산된 바이오오일, 바이오차 및 가스는 각각 62.6 wt%, 18.0 및 19.3으로 나타났다. 또한 온도별로 생성된 바이오오일은 수분함량 0.9~26.1 wt%, 점도 4.2~11.0 cSt, 발열량 3,893~5,230 kcal/kg 및 pH 2.6~3.0 수준으로 긍정적 효과가 나타났다. 이러한 바이오오일 품질개선에도 불구하고 점도는 반대로 증가했으며 여전히 높은 산소 함량, 낮은 발열량 및 산성도 때문에 바이오오일을 실용적인 연료로 사용하기 위해서는 지속적으로 품질 개선이 필요하다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.523-526
• /
• 2006

The target of this work was the process development of demonstration plant to produce the high quailty alternative fuel oil by the pyrolysis of mixed plastic waste. In the first step of research, the bench-scale units of 70t/y and the pi lot plant of 360 t/v had been developed. Main research contents in this step were the process performance test of pilot plant ot 360ton/year and the development of demonstration plant of 3 000 t/y which was constructed at Korea R & D Company in Kimjae City. The process performance of pilot plant of 360 t/v showed components in PONA group appeared at between that of commercial gasoline and kerosene. On the other hand, HO product was mainly paraffin and olefin components and also appeared at upper temperature distribution range than commercial diesel. Gas product showed a high fraction of $C_3\;and\;C_4$ product like LPG composition, but also a high fraction of $CO_2$ and CO by probably a little leak of process.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.474-477
• /
• 2006

유동형 급속열분해기((fluidized bed type fast pyrolyzer, 용량 300g/h)를 이용하여 너도밤나무와 침엽수 흔합재(독일가문비나무/전나무, 50:50)로부터 바이오오일을 생산하였다. 목질바이오매스의 열분해는 약 $470{\pm}5^{\circ}C$에서 1-2초 간 진행되었다. 목질바이오매스의 열분해 생성물의 조성을 살펴보면, 너도밤나무는 바이오오일이 약 60%, 탄이 약 9% 피리 고 가스가 31% 가량 생산되었으며, 침엽수 혼합재는 49%의 바이오오일, 9%의 탄, 그리고 42% 가량의 가스가 생성되었다. 두 종류의 목질바이오매스에서 생산된 바이오오일에는 약 17-22% 가량의 수분이 포함되어 있었으며, 비중은 약 1.2kg/L 이었다. 바이오오일의 원소 조성은 탄소가 45%, 산소가 47% 수소가 7%, 그리 고 질소가 1% 로서 일반적 인 목질바이오매스와 큰 차이는 없는 것으로 나타났다. 그러나 화석자원에서 생산되는 오일류와 비교하여 산소함량은 매우 높았으나 황은 전혀 포함하고 있지 않았다. 바이오오일의 GC분석 결과 총 90여종의 고리형, 또는 비고리형 저분자량 화합물이 검출되었으며 이들의 함량은 바이오오일 전건중량의 31-33% 정도로 측정되었다.

• 신재생에너지
• /
• 제19권4호
• /
• pp.53-60
• /
• 2023

The Computational Fluid Dynamics (CFD) model is a method of studying the flow phenomenon of fluid using a computer and finding partial differential equations that dominate processes such as heat dispersion through numerical analysis. Through CFD, a lot of information about flow disorders such as speed, pressure, density, and concentration can be obtained, and it is used in various fields from energy and aircraft design to weather prediction and environmental modeling. The simulation used for fluid analysis in this study utilized Gexcon's (FLACS) CODE, such as Norway, through overseas journals, for the accuracy of the analysis results through many experiments. It was analyzed that a technology for treating two or more catalysts with physical properties under low-temperature atmospheric pressure conditions could not be found in the prior art. Therefore, it would be desirable to establish a continuous plan by reinforcing data that can prove the effectiveness of producing efficient synthetic oil (renewable oil) through the application that pyrolysis under low-temperature and atmospheric pressure conditions.

• Bulletin of the Korean Chemical Society
• /
• 제35권7호
• /
• pp.2057-2064
• /
• 2014

Thermochemical sulfate reduction (TSR) was conducted in autoclave on the system of crude oil and $MgSO_4$ at different temperatures. Gas chromatography pulsed flame photometric detector (GC-PFPD) was used to detected the composition of organic sulfur compounds in oil phase products. The results of the analysis indicate that with increased temperature, the contents of organic sulfur compounds with high molecular weight and thermal stability, such as benzothiophenes and dibenzothiophenes, gradually became dominated. In order to gain greater insight into the formation and distribution of organic sulphur compounds from TSR, positive ion electrospray Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) was used in detecting the detailed elemental composition and distribution of them. The mass spectra showed that the mass range of sulfur compounds was 200-550 Da. Four sulfur class species, $S_1$, $N_1S_1$, $O_1S_1$ and $O_2S_1$, were assigned in the positive-ion spectrum. Among the identified sulfur compounds, the $S_1$ class species was dominant. The most abundant $S_1$ class species increase associated with the DBE value and carbon number increasing which also indicates the evolution of organic sulfur compounds in TSR is from the labile series to the stable one. In pure blank pyrolysis experiments with crude oil cracking without TSR, different composition and distribution of organic sulfur compounds in oil phase products were seen from mass spectra in order to evaluate their pyrolysis behaviors without $MgSO_4$. FT-IR and XRD were used in analyzing the products of solid phases. Two distinct crystallographic phases MgO and $MgSO_4$ are found to coexist in the products which demonstrated the transformation of inorganic sulfur compounds into organosulfur compounds exist in TSR.

• Korean Chemical Engineering Research
• /
• 제61권4호
• /
• pp.591-597
• /
• 2023

Pakistan depends heavily on imports for its fuel requirements. In this experiment, catalytic pyrolysis of a blend of feedstock's consisting of date seed, wheat straw, and corn cob was conducted in a fixed bed reactor to produce oil that can be used as an alternative fuel. The main focus was to emphasize the outcome of important variables on the produced oil. The effects of operating conditions on the yield of bio-oil were studied by changing temperature (350-500 ℃), heating rate (10, 15, 20 ℃/min), and particle size (1, 2, 3 mm). Moreover, ZnO was used as a catalyst in the process. First, the thermal degradation of the feedstock was investigated by TGA and DTG analysis at 10 ℃/min of different particle sizes of 1, 2, and 3mm from a temperature range of 0 to 1000 ℃. The optimum temperature was found to be 450 ℃ for maximum degradation, and the oil yield was indicated to be around 37%. It was deduced from the experiment that the maximum production of bio-oil was 32.21% at a temperature of 450 ℃, a particle size of 1mm, and a heating rate of 15 ℃/min. When using the catalyst under the same operating conditions, the bio-oil production increased to 41.05%. The heating value of the produced oil was 22 MJ/kg compared to low-quality biodiesel oil, which could be used as a fuel.