• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5570-5575
• /
• 2013

This study was carried out to find prioritization and evaluation of importance factor for plant factory development direction. According to the results, experts have put profitability secure at the top of development of plant factory industry. It is urgently needed in economic sector that products from plants factory secure the market and adjust the shipping date through contract cultivation and year-round production. Also, illuminant technology is also important in technology development section and R&D. On the other hand, consumers do not yet fully understand the benefits of the plant factory, and this will lead to continued slow sales. Therefore, the government needs to draw up measures to support producers who cultivated agricultural products from plant factory.

• International Journal of Automotive Technology
• /
• v.4 no.2
• /
• pp.65-75
• /
• 2003

A HEV evaluation program, funded by ADEME, was carried out by a group of Laboratories of different specialties in order to evaluate and compare consumption, emission and component technologies of the three first HEVs put on the market (Toyota Prius, Nissan Tino and Honda Insight). This paper presents the results obtained until now. These results show good consumption and emission performance of the tested vehicles compared to conventional ones. The energy management seems to be globally the same for the three vehicles excepting for cold stans where the Insight allows a very earlier stop of the engine compared to the Tino and especially to the Prius. A mapping of the engine consumption of the Prius and the Insight was performed in order to furnish data for the simulation models. The Permanent Magnet motors of the Prius and Tino have different number of pair poles and then different emf at a given speed. The low emf values of the Prius allow operation at high speed with less field weakening control than for the Tino. The inverters of the Prius and the Tino, controlled by a PWM at respectively 5 kHz and 7 kHz switching frequency, are made of IGBTs with high commutation performances.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 2000.04a
• /
• pp.150-156
• /
• 2000

Oligotrophic bacteria isolated from forest soil showed a specific community consisting of various taxonomic groups compared with those in other soil or aquatic habitats. Based on the cell shape, the isolates were divided into four groups: regular rod, curved/spiral rod, irregular rod, and prosthecate bacteria. The cellular fatty acids 60 oligotrophic isolates were analyzed. The 30 fatty acids which were identified or characterized are classified. At the dendrogram based on cellular fatty acid composition, four clusters(I-IV) were separated at a euclidian distance of about 50. Cluster 3 and 4-a strains were containing Q-8, these strains are accommodated in the Proteobacteria gamma and beta subdivision. The chemotaxonomic profiles of the cluster 4-a strains showed good agreement with those of the genus Burkholderia. Cluster 3 was characterized by the presence of branched-chain fatty acids, iso-C15:0, iso-C17:1, and iso-C17:0 as the major components. These chemotaxonomy suggested the close relationship of the isolates with Xathomonas/Sterotrophomonas group. Based on the 16S rDNA sequence analysis, the two representative strains(MH256 and MA828) of cluster 3 showed the close relation to genera, Xathomonas/Sterotrophomonas, but were not included in these genera. These strains were even further away from core Xanthomonas, and clearly were seen to branch outside the cluster formed by the Sterotrophomonas maltophilia. MH256 and MA828 16S rDNA sequence was different enough to put new genus on a separate branch. The isolates with Q-10 were also studied. They are corresponded to the two large groups in Proteobacteria alpha subdivision. One was incorporated in the genus Bradyrhizobium cluster, which also includes Agromonas, a genus for oligotrophic bacteria. The strains of the other group showed high similarity to the genus Agrobacterium.

• Journal of the Korean Geographical Society
• /
• v.38
• /
• pp.37-59
• /
• 1988

The aim of this study is to investigate the influence of the technological changes on locational changes on the assumption that technological changes cover over all industrial sectors. The study is carred on 1) To investigate the theoretical backgrounds of the technological and locational changes and their problems. 2) To investigate the location and economic characteristics of the Korean textile industry. 3) To investigate the technological development and regional variations in technological level. 4) To the relationship of the technological change to the location of the textile industries. The locational change of the Korean textile industries have been closely related to economic characteristics. In the begining stage of development in the 1950's, thetextile industries were largely concentrated in the major cities(Seoul, Pusan, Taegu, Masan et. al.). In the growing stage of development in the 1960's, the textile industries were relocated in suburban areas with the trend of large corporations building their branch plants of chemical fibers in the suburbs. With the expansion in the export industry in the 1970's, the textile companies were distributed throughout the whole country. But the research and development(R&D) activities caused the textile industries reconcentrate around Seoul and Pusan, owining to the change of the economic environments in the 1980's. The 1980's have witnessed the increased R&D investment for the development of better new and value-added products. This was because the technological level was much higher than that of Taegu and Other regions. What is more, plant birth location and branch plant location support that locational changes of textile industry were caused by technological changes. Plant birth location put stress technological environments of region, compared with branch plant locaiton. Accordingly, the technological changes of industry can be an important factor in locational changes. Through this study, it can be seen that locational changes come from technological changes. Other locational factors influence the industrial locations, but regional variations in technological level which has been relatively ignored has to be considered on the location study. Together with the accomplishments of existing location study, the study on technological change and location can better explain the location phenomena. And further research on technological change and location can provide better policy implications for regional development.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5838-5842
• /
• 2011

The study mainly aims to explore how deterioration of motor control center, namely MCC, and vibration put impact on temperature of bus bar as well as temperature change of bolt-nut joint. The motor control center consists of three internal parts (i.e. R, S, T) which are for motor operation of high capacity. Two dimensional mechanism for measuring temperature was designed and manufactured with infrared temperature sensor. Installing it in inner motor control center enabled researcher to monitor temperature of bus bar as well as amount of change of current regularly. Temperature change of bus bar according to load was primarily examined based on a bolted joint in the experiment. It was clearly verified that temperature change of bus bar was proportional to current consumption. Therefore, installing non-contact two dimensional mechanism for measuring temperature in motor control center would be expected to prevent temperature rise owing to overload current and power outage as well as fire accident which can be triggered by poor electrical contact.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.4
• /
• pp.451-456
• /
• 2019

Recently, various bioinformation technologies have been proposed, and research and development on the collection and analysis of the human body related bioinformation have been continuously conducted to support the human life environment and healthcare. These biomedical research and development processes add to the redundancy and complexity of the R&D elements and put a heavy burden on the follow-up research developers. Therefore, this study utilizes an open bioinformation platform that effectively supports the collection and analysis of bioinformation to improve the redundancy and complexity of bioinformatics R&D based on the bioinformatics platform. In addition, I propose an open interface that supports acquisition, processing, analysis, and application of bio-signals. In particular, we propose a biometric information normalization pattern model through data analysis modeling of brain wave information based on an open interface.

• Journal of Ginseng Research
• /
• v.18 no.1
• /
• pp.32-38
• /
• 1994

Male rats aged 15 months, which had been over-trained with 12 arm radial maze up to the criterion of 1 or 2 errors an average per trial, were divided into two groups and 7 months after the over-training and were studied the effect of red ginseng trial saponin fraction (PT) on the spatial memory function. The rats which could be improved the performance of 9.75$\pm$1.26 (within 185$\pm$8.2 1 sec) were classified into "normal group" (n=4) and the ones, which showed R-maze performance of 7.0$\pm$2.87 within 300 sec, "deteriorated memory group" (n=5). PT was dissolved in distilled water and injected into the deteriorated memory group intraperitoneally at 30 min before R-maze for 3 consecutive days. The injected amount of PT on the 1st day was 10mg/rat, 1mg/rat both on the 2nd the 3rd day. As results, the performance was restored to 9.4$\pm$2.0 after stopping ginseng administration, although the lower performance values (1.4$\pm$0.89, 2.8$\pm$0.83, 3.8$\pm$0.84, respectively) were exerted during the three days of PT administration than before PT administration (7.0$\pm$2.87) since 1 day after administratitan of PT. The restored performance values were continuously maintained up to the level of the "normal group". However, any lower performance values were not observed when PT was administered via intraperitoneal route to the normal group in about of 2 mg/rat except 10mg1ra1. The number of errors when the foods in arms were put at only 6 places was clearly reduced during the 9 days of consecutive administration of PT as compared with untreated control. These results indicated that PT administration may enhance their cognitive function after a long lapse of time not only in the memory deteriorated rats but also in normal ones. The reason exerted lower performance values during PT administration in this paper was discussed as compared with the results of T-maze behavior of another 3-month-aged rats. of another 3-month-aged rats.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.733-739
• /
• 2011

B2S(Ballasted track To Slab track) that is track system has been first developed in 2004 with foundation of rich experience and know-how of subway track upkeep and mending of facilities in 36 years to improve an existence pebble track at a concrete track. 'B2S' is admitted technology through patent registration in the domestic and Europe and it's made by a factory and put together at field, so it's able to construct precisely and to reduce a construction period. In addition, safety, the ecological balance and durability are excellent, and walking, cleaning, etc. has the advantage of easy maintenance. 'B2S' is currently laying 27.7km at Seoulmetro as of end of 2010 standard, but it'll be expected to be applied to a domestic Metro more from now on. It is possible to classify the total cost resolution structure of B2S system by R&D cost, test production and experiment cost, the initial facility cost, maintenance cost, disposal cost. In this research, it seems useful for selection evaluation which considered the life cycle cost or economics of the concrete track structure by analyzing an initial cost of facilities.

• Journal of the Ergonomics Society of Korea
• /
• v.13 no.1
• /
• pp.27-35
• /
• 1994

Automation and mechanization of work make people put the machine into operation and control the state of operation. In the process of those works they are apt to have accidents caused by their carelessness. To reduce such accidents, we can practice "TOUCH '||'&'||' CALL", which is to indicate and ascertain the dangerous parts at every process before performing tasks. The objectives of this study are to examine the effects of S-R compatibility and to show quantitatively the efficiency of TOUCH '||'&'||' CALL. The results show that: 1. Reaction time in case of indicating with fingers and shouting is slightly longer (0.138sec. .approx. 0.279sec. ) than that of responding only visually. However, the error rate decreases by 1/3.3 .approx. 1/4.2 times. Frome this, it is considered to verify quantitative estimation on multiple feedback of TOUCH '||'&'||' CALL. 2. In the stimulus-response relation aspect, numeric numeric stimulus-numeric response shows lower error rate (0.033% .approx. 0.133%) than any other stimulus-response relation, ahd shorter reaction time is proven ( 0.556sec. .approx. 0.835sec. ). These data suggest that having the order of stimulus-response arranged in accordance with the experimental knowledges and conceptional compatibility can bring down the error rate considerably.

• Safety and Health at Work
• /
• v.7 no.4
• /
• pp.299-306
• /
• 2016

Background: Noncompliance of operators with work procedures is a recurrent problem. This human behavior has been said to be situational and studied by many different approaches (ergonomic and others), which consider the noncompliance with work procedures to be obvious and seek to analyze its causes as well as consequences. Methods: The object of the proposed method is to solve this problem by focusing on the performance of work procedures and ensuring improved performance on a continuous basis. Results: This study has multiple results: (1) assessment of the work procedures' performance by a multicriteria approach; (2) the use of a continuous improvement approach as a framework for the sustainability of the assessment method of work procedures' performance; and (3) adaptation of the Stop-Card as a facilitator support for continuous improvement of work procedures. Conclusion: The proposed method emphasizes to put in value the inputs of continuous improvement of the work procedures in relation with the conventional approaches which adopt the obvious evidence of the noncompliance to the working procedures and seek to analyze the cause-effect relationships related to this unacceptable phenomenon, especially in strategic industry.