• Title/Summary/Keyword: PutR

Search Result 295, Processing Time 0.032 seconds

New 3D failure analysis of water-filled karst cave beneath deep tunnel

  • Zhang, R.;Yang, X.L.
    • Geomechanics and Engineering
    • /
    • v.18 no.1
    • /
    • pp.1-9
    • /
    • 2019
  • In this study, both 2D and 3D failure shapes of rock mass above the water-filled cavity are put forward when the surrounding rock mass cannot bear the pressure caused by the water-filled cavity. Based on the analytical expressions derived by kinematic approach, the profiles of active and passive failure patterns are plotted. The sensitivity analysis is conducted to explore the influences of different rock parameters on the failure profiles. During the excavation of the deep tunnels above the karst cavity, the water table always changes because of progressive failure of cavity roof. Therefore, it is meaningful to discuss the effects of varying water level on the failure patterns of horizontal rock layers. The changing laws of the scope of the failure pattern obtained in this work show good consistency with the fact, which could be used to provide a guide in engineering.

A review on development in design of multistage centrifugal pump

  • Rode, Bhushan R.;Khare, Ruchi
    • Advances in Computational Design
    • /
    • v.6 no.1
    • /
    • pp.43-53
    • /
    • 2021
  • Multi-stage pumps are the most popular pumps among various kinds of centrifugal pumps. Athorough review of different kinds of literature has led to the conclusion that there is a desperate need to increase the performance of the multi-stage centrifugal pump. Many investigators have put their efforts to increase the pump performance and also the work is being projected on various aspects of pump performance variables. To improve the multistage centrifugal pump performance by investigation, modification, and analysis many works of literature are available. For analysis, many researchers used the Navier-Stokes solver to create the three-dimensional unsteady turbulent flow numerical model with the standard k-ε turbulent equation. This paper mainly focuses on research related to the multi-stage centrifugal pump.

VTS English Communication Proficiency Criteria based on G1132 VTS VHF Voice Communication

  • Seung-Hee Choi
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2023.05a
    • /
    • pp.19-20
    • /
    • 2023
  • IALA Guideline 1132 is intended to assist authorities in implementing the procedures described in IALA Recommendation R1012: VTS Communications with the objective of harmonizing VTS communications through the use of standard message structure and phraselogly. For this reason, it is recommended that VTS Authorities put adequate procedures in place to ensure its consistent and correct implementation for the actual VTS operation as is now being considered in IALA as part of the VTS English language proficiency test. In light of the 2022 publication of IALA Guideline 1132: VTS Voice Communications and Phraseology, in this sense, the potential evaluative variables will be studied in the context of this presentation.

  • PDF

Effects of the Educational Program for Patients of T.K.R.A. (슬관절 치환술 환자의 교육 프로그램 효과에 관한 연구)

  • Wang, Mi-Suk
    • The Journal of Korean Academic Society of Nursing Education
    • /
    • v.7 no.1
    • /
    • pp.68-80
    • /
    • 2001
  • This study is aimed to evaluate the effects of the educational program that is designed to help the patients of T.K.R.A. to improve their self-nursing ability. The research will show how well this program can contribute to raising of their adaptability of everyday life by decreasing the difficulties that the patients had before in their daily life. The sample persons for this research were 40 adult patients who had T.K.R.A. in our hospital, and the data were collected through the questionnaires which were given to them. For the surveying tool, Jette's scale was applied to measure the degree of uncomforting that the patients experienced in their daily life. The materials of report had been gathered from May 1st to December 10th. The collected data were analyzed with real numbers, percentage, average, the standard deviation, TorF test and Pearsons correlation. The results of this study can be summarized like follows: The survey of self-caring exercise part were processed with two groups containing experiment group and contrast group. The exercise which took the highest points in experiment group was repetition of stretching and bending knees with laid down position while taking a walk, repetition of stretching and bending knees with seated on chair position and repetition of stretching and bending knees with laid down position got high points in contrast group. There were distinctive differences in statistics between repetition of stretching and bending knees in laid down position and taking a walk. There was no significant statistical gap between the degrees of inconveniences of daily life that each two groups experienced when we compared the average of the two groups, but 12 out of 20 questions got considerable differences. According to common characters of self-caring, there was a distinctive gap in the group who left the hospital in 14days and the ones who spend more than 30 minutes with exercise. The patient group who left the hospital in fourteen days after T.K.R.A. spent more time doing self-caring exercise. In the relationship between common characters and the degree of difficulties of daily life, Exercising is effective and Spending more that 30 minutes for exercise showed visible differences. The patients who answered that exercise are effective and put more time for it experienced less pain in their everyday life. The data proved by Pearson's correlation showed the relationship between self- caring and the degree of pain of daily life. According to the result, the increasing of self-caring activities helped to down the degree of inconveniences of daily life. This data show that T.K.R.A. reduced self-caring exercise ability and daily life activities. Therefore, the medical staffs who would take care the T.K.R.A. patients should offer stable nursing through well scheduled and education materials for patients. It is also important to encourage the patients to participate to the exercise by showing them how exercise after T.K.R.A. The education program is expecting to guarantee not only the right of patients to get enough information but also effective result to decrease uncomfortable of daily life.

  • PDF

Prediction from Linear Regression Equation for Nitrogen Content Measurement in Bentgrasses leaves Using Near Infrared Reflectance Spectroscopy (근적외선 분광분석기를 이용한 잔디 생체잎의 질소 함량 측정을 위한 검량식 개발)

  • Cha, Jung-Hoon;Kim, Kyung-Duck;Park, Dae-Sup
    • Asian Journal of Turfgrass Science
    • /
    • v.23 no.1
    • /
    • pp.77-90
    • /
    • 2009
  • Near Infrared Reflectance Spectroscopy(NIRS) is a quick, accurate, and non-destructive method to measure multiple nutrient components in plant leaves. This study was to acquire a liner regression equation by evaluating the nutrient contents of 'CY2' creeping bentgrass rapidly and accurately using NIRS. In particular, nitrogen fertility is a primary element to keep maintaining good quality of turfgrass. Nitrogen, moisture, carbohydrate, and starch were assessed and analyzed from 'CY2' creeping bentgrass clippings. A linear regression equation was obtained from accessing NIRS values from NIR spectrophotometer(NIR system, Model XDS, XM-1100 series, FOSS, Sweden) programmed with WinISI III project manager v1.50e and ISIscan(R) (Infrasoft International) and calibrated with laboratory values via chemical analysis from an authorized institute. The equation was formulated as MPLS(modified partial least squares) analyzing laboratory values and mathematically pre-treated spectra. The accuracy of the acquired equation was confirmed with SEP(standard error of prediction), which indicated as correlation coefficient($r^2$) and prediction error of sample unacquainted, followed by the verification of model equation of real values and these monitoring results. As results of monitoring, $r^2$ of nitrogen, moisture, and carbohydrate in 'CY2' creeping bentgrass was 0.840, 0.904, and 0.944, respectively. SEP was 0.066, 1.868, and 0.601, respectively. After outlier treatment, $r^2$ was 0.892, 0.925, and 0.971, while SEP was 0.052, 1.577, and 0.394, respectively, which totally showed a high correlation. However, $r^2$ of starch was 0.464, which appeared a low correlation. Thereof, the verified equation appearing higher $r^2$ of nitrogen, moisture, and carbohydrate showed its higher accuracy of prediction model, which finally could be put into practical use for turf management system.

A Pioneer of Korean nursing, Elizabeth J. Shepping's Nursing Missionary Work (한국간호의 선구자 엘리자베스 쉐핑 (Elizabeth J. Shepping, R. N.)의 간호선교)

  • Yoon, Me Ok
    • The Journal of the Convergence on Culture Technology
    • /
    • v.3 no.4
    • /
    • pp.107-115
    • /
    • 2017
  • This study was to summarize in Nursing perspective nursing missionary activities of Elizabeth J. Shepping, R, N(1880~1934), a Southern Presbyterian nursing missionary and explore Korean women's lives and Korean nursing history during the Japanese Colonial Period. Shepping committed herself to nursing activities, providing care to the lepers and patients mainly in Gwangju Jejung Hospital, Gunsan Guam Jesus Hospital, and Severnce Hospital, as well as engaging in nursing activities for disease prevention in local communities. She put much effort in educating women and nurses to help recover women's human rights, simultaneously spreading gospel for salvation. She founded the Chosun Nursing Association to help Korean community oppressed under Japanese colonial. Shepping's life based on her motto,"Not success, but service,"was holistic nursing missionary work.

Survey of Traditional Korean Medical Device : Number of devices, Problems, Solution Plan (한방 의료기관의 의료기기 보유현황 및 한방의료기기의 문제점과 개선방안에 대한 조사 연구)

  • Kim, Ji Hye;Kim, Jaeuk U.;Kim, Keun Ho
    • Journal of Physiology & Pathology in Korean Medicine
    • /
    • v.28 no.4
    • /
    • pp.430-439
    • /
    • 2014
  • This study was performed to assess the perception and needs of the traditional Korean Medical Equipment (KME) in clinic. We conducted survey research among 15,550 traditional Korean medical doctors (KMD) responded to e-mail during 2 weeks. 899 participants the survey, consisting of questions regarding 'number of devices of the KME' and 'solution and improvement plan of the KME'. The participants were asked to choose their ranking of problems of the KME and also put a check mark in the column that the reasons for this choice. As results, final scores in priority ranking medical devices were derived in 7 categories. Physical therapy equipment and acupuncture treatment devices were included in high ranks. 42.8 % of the participants responded that the diagnostic medical devices seemed important in clinics and 67.4 % of the participants indicated that the therapeutic medical devices seemed to important in clinics. The identified problems of KME were 'low reproducibility and reliability of a diagnosis result (24.8%)' and 'uncertain validity of a diagnostic medical devices (20.5%)'. The improvement plan of the problems were 'to establish the law for using the medical devices (26.6%)' and 'evaluation of validity of the KME (26.2%)'. A survey of KMD revealed the condition of KME's number of devices and the solution plan for the problem of several KMEs. Understanding the needs of KMD could probably contribute to the research and development of KMEs in the future.

A Study on the Recycling of Molten Ladle Slag Residue into LF Process (Ladle내 잔류(殘留) 용융(熔融)슬래그의 LF 공정(工程)으로 재활용(再活用)에 관한 연구(硏究))

  • Kim, Young-Hwan;Yoo, Jung-Min;Kim, Dong-Sik;Lim, Jong-Hoon;Yang, Sung-Ho
    • Resources Recycling
    • /
    • v.22 no.1
    • /
    • pp.36-41
    • /
    • 2013
  • LF slag is formed by EAF carryover slag and slag former(such as lime, dolomite) put into the ladle during the tapping molten metal. After LF process, continuous casting is started when molten steel is sent from ladle to tundish through bottom nozzle of ladle. Conventionally, remained molten slag and steel in ladle are poured into a slag port and they are transferred to a slag yard and then recycled. In this study, we investigated about recycling of molten LF slag residue(including Fe residue to reuse) which is made in steelmaking process. As a result, lime usage was decreased about 2.2~3.2 kg/steel-ton and also molten steel yield rate was increased about 0.3 ~ 0.5 percent point.

The Quantitative Analysis by Digital Subtraction Radiography on the Effect of Platelet Rich Plasma Combined with Synthetic Bone Graft on Grade II Furcation Involvement (2급 치근 이개부 치료 시 합성골 이식 및 혈소판 농축 혈장의 골재생 효과에 대한 디지털 공제술의 정량적 분석)

  • Oh, Ji-Soo;Lim, Sung-Bin;Chung, Chin-Hyung
    • Journal of Periodontal and Implant Science
    • /
    • v.31 no.2
    • /
    • pp.465-475
    • /
    • 2001
  • The purpose of this study was to evaluate effect of platelet rich plasma on the treatment of Grade II furcation involvement, with and without porous resorbable calcium carbonate($Biocoral^{(R)}$)in humans by digital subtraction radiography. 15 teeth(control group) were treated with porous resorbable calcium carbonate($Biocoral^{\(R)}$), and 15 teeth(test group) were treated with porous resorbable calcium carbonate($Biocoral^{(R)}$) and Platelet Rich Plasma. The change of bone density was assessed by digital subtraction radiography in this study. The change of mineral content by as much as 5%(vol) could be perceived in the subtracted images. The change of mineral content was assessed in the method that two radiographs are put into computer program to be overlapped and the previous image is subtracted by the later one. Both groups were statistically analyzed by Wilcoxon signed Ranks Test and Mann-whitney Test using SPSS program(5% significance level). The results were as follows: 1. In test group, the radiolucency in 3 months after surgry were significantly increased than 1 month after surgery(p<0.05). 2. In test group, there were no significant difference between 1 month after surgery and 6 months after surgery(p>0.05). 3. In test group, the radiopacity in 6 months after surgery were significantly increased than 3 months after surgery(p<0.05). 4. In control group, the radiolucency in 3 months and 6 months after surgery were significantly increased than 1 month after surgery(p<0.05). 5. In control group, the radiopacity in 6 months after surgery were significantly increased than 3 months after surgery(p<0.05). 6. There were no significant difference between test group and control group at 1 month, 3 months after surgery, but radiopacity in test group were significantly increased than control group at 6 months after surgery(p<0.05). In conclusion, Platelet Rich Plasma can enhance bone density.

  • PDF

The effects of matrix aging and residual stress changes on $Avimid^{(R)}$ K3B/IM7 laminates (수지 노화와 잔류응력 변화가 $Avimid^{(R)}$ K3B/IM7 복합재 적층에 미치는 영향)

  • Kim, Hyung-Won
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.8 no.3 s.22
    • /
    • pp.124-130
    • /
    • 2005
  • In this paper, the effects of matrix hygrothermal aging and residual stress changes on $Avimid^{(R)}$ K3B/IM7 laminates in $80^{\circ}C$ water were studied. The factors causing the $80^{\circ}C$ water to degradation of the laminates could be the degradation of the matrix toughness, the change in residual stresses. After 500 hours fully saturated aging of the neat resin, the weight gain was 1.55% increase with the diffusion coefficient $7{\times}10^{-6}m^2/s$ and the fracture toughness was decreased about 41%. After 100 hours fully saturated aging of the $[+45/0/-45/90]_s$ K3B/IM7 laminates in $80^{\circ}C$ water, the weight gain was 0.41% increase with the diffusion coefficient $1{\times}10^{-6}m^2/s$ and the loss of the microcracking fracture toughness was 43.8% of the original toughness. To see whether the residual stress influenced the fracture toughness, two ply $[90^{\circ}/0^{\circ}]$ laminates were put in $80^{\circ}C$ water from 2 hours to 8 hours. The changes in residual stress in 8 hours are less than 3MPa. Because the 3MPa change is not sufficient to degrade the laminates, the main factor to degrade the microcracking fracture toughness was the degradation of the matrix fracture toughness.