• Restorative Dentistry and Endodontics
• /
• 제43권3호
• /
• pp.18.1-18.12
• /
• 2018

Objectives: This study compared the retention of BioAggregate (BA; Innovative BioCeramix) and mineral trioxide aggregate (MTA; Angelus) as coronal plugs after applying different intracanal medications (ICMs) used in regenerative endodontic. Materials and Methods: One-hundred human maxillary central incisors were used. The canals were enlarged to a diameter of 1.7 mm. Specimens were divided into 5 groups (n = 20) according to the ICM used: calcium hydroxide (CH), 2% chlorhexidine (CHX), triple-antibiotic paste (TAP), double-antibiotic paste (DAP), and no ICM (control; CON). After 3 weeks of application, ICMs were removed and BA or MTA were placed as the plug material (n = 10). The push-out bond strength and the mode of failure were assessed. The data were analyzed using 2-way analysis of variance, the Tukey's test, and the ${\chi}^2$ test; p values < 0.05 indicated statistical significance. Results: The type of ICM and the type of plug material significantly affected bond strength (p < 0.01). Regardless of the type of ICM, BA showed a lower bond strength than MTA (p < 0.05). For MTA, CH showed a higher bond strength than CON, TAP and DAP; CHX showed a higher bond strength than DAP (p < 0.01). For BA, CH showed a higher bond strength than DAP (p < 0.05). The mode of failure was predominantly cohesive for BA (p < 0.05). Conclusions: MTA may show better retention than BA. The mode of bond failure with BA can be predominantly cohesive. BA retention may be less affected by ICM type than MTA retention.

• Restorative Dentistry and Endodontics
• /
• 제42권2호
• /
• pp.125-133
• /
• 2017

Objectives: This study compared the effect of hexamethyldisiloxane (HMDSO) and ammonia ($NH_3$) plasmas on the bond strength of resin cement to fiber posts with conventional treatments. Materials and Methods: Sixty-five fiber posts were divided into 5 groups: Control (no surface treatment); $H_2O_2$ (24% hydrogen peroxide for 1 min); Blasting (blasting with aluminum oxide for 30 sec); $NH_3$ ($NH_3$ plasma treatment for 3 min); HMDSO (HMDSO plasma treatment for 15 min). After the treatments, the Ambar adhesive (FGM Dental Products) was applied to the post surface (n = 10). The fiber post was inserted into a silicon matrix that was filled with the conventional resin cement Allcem Core (FGM). Afterwards, the post/cement specimens were cut into discs and subjected to a push-out bond strength (POBS) test. Additionally, 3 posts in each group were evaluated using scanning electron microscopy. The POBS data were analyzed by one-way analysis of variance and the Tukey's honest significant difference post hoc test (${\alpha}=0.05$). Results: The Blasting and $NH_3$ groups showed the highest POBS values. The HMDSO group showed intermediate POBS values, whereas the Control and $H_2O_2$ groups showed the lowest POBS values. Conclusion: Blasting and $NH_3$ plasma treatments were associated with stronger bonding of the conventional resin cement Allcem to fiber posts, in a procedure in which the Ambar adhesive was used.

• Wind and Structures
• /
• 제14권6호
• /
• pp.517-536
• /
• 2011

The assessment of wind-induced motion plays an important role in the development and design of the majority of today's structures that push the limits of engineering knowledge. A vital part of the design is the prediction of wind-induced tall building motion and the assessment of its effects on occupant comfort. Little of the research that has led to the development of the various international standards for occupant comfort criteria have considered the effects of the low-frequency motion on task performance and interference with building occupants' daily activities. It has only recently become more widely recognized that it is no longer reasonable to assume that the level of motion that a tall building undergoes in a windstorm will fall below an occupants' level of perception and little is known about how this motion perception could also impact on task performance. Experimental research was conducted to evaluate the performance of individuals engaged in a manual tracking task while subjected to low level vibration in the frequency range of 0.125 Hz-0.50 Hz. The investigations were carried out under narrow-band random vibration with accelerations ranging from 2 milli-g to 30 milli-g (where 1 milli-g = 0.0098 $m/s^2$) and included a control condition. The frequencies and accelerations simulated are representative of the level of motion expected to occur in a tall building (heights in the range of 100 m -350 m) once every few months to once every few years. Performance of the test subjects with and without vibration was determined for 15 separate test conditions and evaluated in terms of time taken to complete a task and accuracy per trial. Overall, the performance under the vibration conditions did not vary significantly from that of the control condition, nor was there a statistically significant degradation or improvement trend in performance ability as a function of increasing frequency or acceleration.

• Composites Research
• /
• 제21권5호
• /
• pp.1-8
• /
• 2008

강합성교량에서 스터드 전단연결재 및 Perfobond 전단연결재와 관련된 문제를 해결하고, 콘크리트와 전단연결재가 동시에 파괴되도록 유도하기 위해 역 L형 유공판 전단연결재가 개발되었으며, FRP-콘크리트 합성바닥판에서는 FRP의 재료적 특성과 펄트루젼 생산방식을 고려하여 콘크리트와 FRP의 합성방안으로 Perfobond 형 FRP 전단연결재를 적용하고 있다. 이 연구는 기존 강재 Perfobond 전단연결재에 대한 문헌분석, 2면전단실험, 유한요소해석 등의 방법을 통해 역 L형 유공판 전단연결재, FRP 전단연결재에 대한 각각의 강도를 추정할 수 있는 강도평가식을 제안하였고, 제안한 평가식의 결과와 실험결과를 비교하여 타당성을 검증하였다.

• Steel and Composite Structures
• /
• 제6권6호
• /
• pp.459-477
• /
• 2006

A theoretical research project is undertaken to develop integrated analysis and design tools for long span composite beams in modern high-rise buildings, and it aims to develop non-linear finite element models for practical design of composite beams. As the first paper in the series, this paper presents the development study as well as the calibration exercise of the proposed finite element models for simply supported composite beams. Other practical issues such as continuous composite beams, the provision of web openings for passage of building services, the partial continuity offered by the connections to columns as well as the behaviour of both unprotected and protected composite beams under fires will be reported separately. In this paper, details of the finite elements and the material models for both steel and reinforced concrete are first described, and finite element studies of composite beams with full details of test data are then presented. It should be noted that in the proposed finite element models, both steel beams and concrete slabs are modelled with two dimensional plane stress elements whose widths are assigned to be equal to the widths of concrete flanges, and the flange widths and the web thicknesses of steel beams as appropriate. Moreover, each shear connector is modelled with one horizontal spring and one vertical spring to simulate its longitudinal shear and pull-out actions based on measured load-slippage curves of push-out tests of shear connectors. The numerical results are then carefully analyzed and compared with the corresponding test results in terms of load mid-span deflection curves as well as load end-slippage curves. Other deformation characteristics of the composite beams such as stress and strain distributions across the composite cross-sections as well as distributions of shear forces and slippages in shear connectors along the beam spans are also examined in details. It is shown that the numerical results of the composite beams compare well with the test data in terms of various load-deformation characteristics along the entire deformation ranges. Hence, the proposed analysis and design tools are considered to be simple and yet effective for composite beams with practical geometrical dimensions and arrangements. Structural engineers are strongly encouraged to employ the models in their practical work to exploit the full advantages offered by composite construction.

• 기본간호학회지
• /
• 제4권2호
• /
• pp.267-282
• /
• 1997

This study was to test the relationship between regular physical exercise and physical fitness in nursing students. These subjects were 54 volunteers who agreed with intention of this study and were composed of 24 active group and 30 non-active group. The selected physical fitness tests were grip strength and back strength for measuring muscular strength, sargent jump and standing broad jump for measuring power, push-up, sit-up, and heart rate for measuring total endurance, reaction time and side step test for measuring agility, stick test and stork stand for measuring balance, and trunk flexion and trunk extension for measuring flexibility. The conclusion acquired was as follows : 1) Grip strength had significant difference between active group of $29.5{\pm}5.9kg$ and non-active group $25.4{\pm}7.2kg$(t=2.283, p=.027), and back strength between active group of $54.1{\pm}13.7kg$ and non-active group of $44.7{\pm}15.7kg$(t=2.310, p=.025), 2) Sargent jump was lower with non-active group($44.9{\pm}8.6cm$) than with active group($45.3{\pm}8.8cm$), however, was not significant(t=.182, p=.856). Standing broad jump was significantly lower with non-active group of $161.3{\pm}28.7cm$ than with active group of $191.4{\pm}27.0cm$(t=3.939, p=.000). 3) Push-up showed significant difference between active group of $25.3{\pm}12.3times$ and non-active group of $11.5{\pm}5.1times$(t=5.572, p=.000), and sit-up between active group of $21.8{\pm}7.4times$ and non-active group of $17.1{\pm}5.8times$(t=2.631, p=.011), and heart rate between actvie group of $110.5{\pm}12.8$beats/min and non-active group of $121.5{\pm}9.5$beats/min(t=-3.648, p=.001). 4) Reaction time was significantly higher with non-active group of $.300{\pm}.051sec$ than with active group of $.341{\pm}.041sec$(t=-3.285, p=.002). Side step test was lower with non-active group($8.8{\pm}1.1times$) than with active group($9.2{\pm}1.2times$), however, was not significant (t=1.309, p=.196). 5) Stick test showed not significant difference between active group of $25.8{\pm}14.8sec$ and non-active group of $30.7{\pm}17.9sec$(t=-1.058, p=.295), and stork stand between active group of $4.5{\pm}3.2sec$ and non-active group of $3.7{\pm}3.5sec$(t=.918, p=.363). 6) Trunk flexion came out not significant difference between active group of $14.2{\pm}5.0cm$ and non-active group of $15.8{\pm}7.3cm$(t=-.927, p=.358), and trunk extension between active group of $67.1{\pm}6.5cm$ and non-active group of $67.3{\pm}6.6cm$(t=-.140, p=.889). 7) Power was shown to be significantly related to total endurance(r=.717, p=.000 ; r-.739, p=.000). 8) Total endurance was shown to be significantly related to agility(r=-.752, p=.000 ; r=.684, p=.000 ; r=-.664, p=.000 ; r=.598, p=.002 ; r=.864, p=.000 ; r=-.536, p=.007). These results suggest that regular physical exercise is effective in promoting and maintaining physical fitness. As the further study, it is necessary to reinvestigate the effect with more refined design.

• 대한통합의학회지
• /
• 제1권1호
• /
• pp.61-68
• /
• 2013

Purpose : The purpose of this study is to evaluate the stability and balance of the body, mobility complex exercise group and a student group for FMS tests to compare the differences between the two groups to identify its purpose. Method : The subjects of this study FMS measuring D University Physical Therapy, a student enrolled patients (7:7), and 7 patients total of 14 patients was conducted, compound exercise group weekly stretching 10 minutes, the 24 members who have run a complex exercise, 10 minutes of cool down stretching, 20-minute aerobic exercise were included in the study. Result : The results of this study, according to 1) Deep squat, Inline lunge, Trunk Stability Push-up there was significant difference(p<0.05), compound exercise group came out significantly higher. 2) Hurdle Step, Shoulder Mobility Reaching, Active Straight-leg Raise, Rotary stability in measured target these women flexibility because the test items that did not show a significant difference(p>0.05), the two groups averaged compared to the other items were higher. Complex exercise group, a statistically significant difference was overall average. Conclusion : FMS can not be resolved because of a compensatory mechanism to identify disparities and unbalanced movement patterns can help. Therefore, if the FMS and other tests conducted by splicing, will be utilized more profitably, and you will be able to suggest ways that can have a positive impact injury prevention is added to the side to expand the scope of the physical therapist.

• 대한치과보철학회지
• /
• 제46권3호
• /
• pp.261-268
• /
• 2008

STATEMENT OF PROBLEM: Detachment of the magnetic assembly from the denture base has been a problem in magnetic overdenture patients. PURPOSE: The objectives of this study were to compare the dislodging force by the fixing materials and the designs of the magnetic assembly, and to compare the effect between the fixing materials and the designs of the magnetic assembly. MATERIAL AND METHODS: Two fixing materials, Jet denture repair $acrylic^{(R)}$ and Super-$Bond^{(R)}$ C&$B^{(R)}$ and two types of magnetic assembly designed with or without wing were used. Each magnetic assembly was fixed in the chamber of the denture base resin block ($Lucitone^{(R)}$199) with each fixing material respectively. These specimens were thermocycled 2,000 cycles in the water held at $4^{\circ}C$ and $60^{\circ}C$ with a dwell time of 1 min each time. Each specimen was seated in a testing jig and then a push-out test was performed with a universal testing machine at a cross head speed of 0.5 mm/min to measure the maximum dislodging forces. RESULTS: Comparing the fixing materials, Super-Bond C&$B^{(R)}$ showed superior dislodging force than Jet denture repair $acrylic^{(R)}$. Comparing the design of the magnetic assemblies, the wing design magnetic assembly showed better dislodging force. Combination of the Super-Bond C&$B^{(R)}$ as a fixing material and wing design magnetic assembly revealed a greatest dislodging force. The kind of fixing material was more influential than the type of magnetic assembly. CONCLUSION: The dislodging force of Super-Bond C&$B^{(R)}$ was significantly higher than Jet denture repair $acrylic^{(R)}$. And the dislodging force of magnetic assembly which have wing design was significantly higher than magnetic assembly which have no wing design.

• Steel and Composite Structures
• /
• 제36권3호
• /
• pp.321-337
• /
• 2020

Contemporary design and construction of steel-concrete composite structures employs the use of prefabricated concrete elements and demountable shear connectors in order to reduce the construction time and costs and enable dismantling of elements for their potential reuse at the end of life of buildings. Bolted shear connector with mechanical coupler is presented in this paper. The connector is assembled from mechanical coupler and rebar anchor, embedded in concrete, and steel bolt, used for connecting steel to concrete members. The behaviour and ultimate resistance of bolted connector with mechanical coupler in wide and narrow members were analysed based on push-out tests and FE analyses conducted in Abaqus software, with focus on concrete edge breakout and bolt shear failure modes. The effect of concrete strength, concrete edge distance and diameter and strength of bolts on failure modes and shear resistance was analysed. It was demonstrated that premature failure by breakout of concrete edge occurs when connectors are located 100 mm or closer from the edge in low-strength and normal-strength reinforced concrete. Furthermore, the paper presents a relatively simple model for hand calculation of concrete edge breakout resistance when bolted connectors with mechanical coupler are used. The model is based on the modification of prediction model used for cast-in and post-installed anchors loaded parallel to the edge, by implementing equivalent influence length of connector with variable diameter. Good agreement with test and FE results was obtained, thus confirming the validity of the proposed method.

• The Journal of Advanced Prosthodontics
• /
• 제6권4호
• /
• pp.295-301
• /
• 2014

PURPOSE. Numerous methods were used to etch the fiber posts to improve its bonding to root canal dentin. Our aim was to evaluate the efficacy of 37% phosphoric acid in etching fiber posts in comparison with 24% hydrogen peroxide. MATERIALS AND METHODS. Ninety human maxillary central incisors were taken and post space preparation was done. Ninety fiber posts were taken and divided into three groups (n=30) based on the surface treatment they received ($H_3PO_4$, $H_2O_2$, distilled water) and each group was further divided (n=10) based on the time period of application (15 seconds, 30 seconds, 60 seconds). All the posts were luted into canals using Rely X UniCem-2. Each tooth was then sectioned into six slices and subjected to push out test. Data obtained was subjected to statistical analysis at P<.05. The surface topography was evaluated using scanning electron microscopy. RESULTS. Highest bond strength values were noted in 15 seconds etched phosphoric acid group and 60 seconds etched hydrogen peroxide group with no significant difference between two groups. Surface topography revealed complete epoxy layer removal with no damage to its structural integrity in those groups. CONCLUSION. $H_3PO_4$ etching for a period of 15 seconds is an effective alternative in improving the adhesion of fiber post to root dentin.