• 한국환경보건학회지
• /
• 제46권6호
• /
• pp.646-654
• /
• 2020

Objectives: Users of parks or children's play facilities have pointed to pets' bowel movements as the most serious problem when using them. In prior studies, a very low detection rate of parasites (eggs) in sand flooring materials has been found. Even though feces have been identified, no parasites (eggs) have been detected. Method: A standard solution of nitrate nitrogen was used to verify the reliability of a new nitrogen analysis method. The linearity, precision, and accuracy of the nitrate nitrogen analysis method were verified. Using this method, the pollution distribution of the sand flooring material and the degree of pollution at each point were investigated. Results: As a result of the verification of the nitrogen analysis method, the linearity was found to be good at r2=0.999 when distilled water is mixed in a standard substance solution. The standard substance additive solution r2=0.968 was found to be good. Precision represented 0.01 to 0.06% RSD for peak height. The recovery rate was 92.4 to 104.0 percent, indicating high accuracy. According to the same method of analysis, the flooring material sand at a general amusement facility with the largest number of concealed spaces was nitrate nitrogen 6.1 times higher than at the entrance of the playground. Also, in a comparison between clean sand and sandy flooring, the average nitrogen concentration of the sand flooring material was 24.4-167 times higher than pure sand. Conclusions: As such, no parasites (eggs) were detected at all points under investigation, but the sand flooring was exposed to animal fecal contamination. Therefore, the management of nitrogenous components should allow accurate identification of animal fecal contamination so that the timing of sand replacement can be managed hygienically and safely.

• 미생물학회지
• /
• 제34권3호
• /
• pp.132-136
• /
• 1998

자연환경의 미생물군집을 분자생태학적 방법으로 분석하기 위해서는 오염되지 않은 순수한 핵산의 분리가 필요하다. 해양퇴적물에서 핵산을 추출할 때 같이 추출되는 부식물질(humic substances)은 핵산중폭반응을 저해하기 때문에, 이를 제거하기 위한 네 가지의 방법, 아가로즈젤 전기영동후 용출, Sephadex G-75 젤, Hydroxyapatite 젤, 그리고 PVPP(poluvinylpolypyrrolidone) microspin column 방법에 대해 그 효율성을 비교하였다. 조산된 방법 중에서 PVPP microspin column을 이용하면 건조 퇴적물 1g당 $4.8{\mu}g$의 순수한 DNA를 신속하고 간편하게 얻을 수 있었고, 이 방법으로 분리된 DNA를 PCR의 주형으로 사용한 결과 16S rRNA 유전자의 거의 전 범위에 해당하는 1.5 kb 크기의 PCR 산물을 얻을 수 있었다.

• 한국환경농학회지
• /
• 제36권1호
• /
• pp.17-21
• /
• 2017

BACKGROUND: Castor oil and wormseed extract are important active ingredients for biopesticide, and ricinoleic acid in castor oil and three monoterpenes (ascaridole, carvacrol and p-cymene) in wormseed extract are known bioactive substances. However, their stabilities had not been studied, even though the stability was the core property for estimation of shelf-life of biopesticide. Aimed to investigate the thermal stabilities of the bioactive substances in castor oil and wormseed extracts. METHODS AND RESULTS: The contents of ricinoleic acid and three monoterpenes (ascaridole, carvacrol and p-cymene) were analyzed by gas chromatography (GC). The thermal stabilities of the bioactive substance were measured at $0^{\circ}C$, $23^{\circ}C$, $30^{\circ}C$, $40^{\circ}C$, $45^{\circ}C$ and $54^{\circ}C$ for 84 d. The half-lives of ricinoleic acid in biopesticides was ranged from 28.9 d to 57.8 d at $30^{\circ}C$, and the stability of pure castor oil were located in the range ($t_{1/2}$=46.2d for Indian product and 27.7 d for Korean product) at the same temperature. The half-lives of the total monoterpenes in biopesticides were ranged from 3.9 d to 27.7 d at $30^{\circ}C$. Among the monoterpenes, the stability ascaridole and p-cymene were decreased in acidic condition. All the bioactive substances showed similar stability on the different thermal conditions. CONCLUSION:The half-lives of most bioactive substance from castor oil and wormseed extracts were less than 100 d. To increase the stability of bioactive substance in biopesticide, stabilizing additives like antioxidant and oxygen remover should be considered to extend of the shelf-life.

• 한국안전학회지
• /
• 제38권5호
• /
• pp.8-14
• /
• 2023

Lithium ions can induce the thermal runaway phenomenon and lead to reignition due to electrical, mechanical, and environmental factors such as high temperature, smoke generation, explosions, or flames, which is extremely likely to create safety concerns. Therefore, one of the ways to improve the flame retardancy of the electrolyte is to use a flame-retardant additive. Comparing the associated characteristic value of existing substances with the required experimental value, it was found that these values were either considerably different or were not documented. It is vital to know a substance's combustion characteristic values, flash point, explosion limit, and autoignition temperature (AIT) as well as its combustion characteristics before using it. In this research, the flash point and AIT of materials were measured by mixing a highly volatile and flammable substance, diethyl carbonate (DEC), with flame-retardant dimethyl methylphosphonate (DMMP). The flash point of DEC, which is a pure substance, was 29℃, and that for DMMP was 65℃. Further, the lower explosion limit calculated using the measured flash point of DEC was 1.79 Vol.%, while that for DMMP was 0.79 Vol.%. The AIT was 410℃ and 390℃ for DEC and DMMP, respectively. In particular, since the AIT of DMMP has not been discussed in any previous study, it is necessary to ensure safety through experimental values. In this study, the experimental and regression analysis revealed that the average absolute deviation (ADD) for the flash point of the DEC+DMMP DEC+DMMP system is 0.58 sec and that the flash point tends to increase according to changes in the composition employed. It also revealed that the AAD for the AIT of the mixture was 3.17 sec and that the AIT tended to decrease and then increase based on changes in the composition.

• 대한화학회지
• /
• 제43권1호
• /
• pp.52-57
• /
• 1999

In($C_6F_5)_3{\cdot}D(D=CH_3CN$, O($C_2H_5)_2$)와 ($CH_3)_3SiC_6F_5$/CsF, $C_6F_5$MgBr 또는 Cd($C_6F_5)_2$을 반응시켜 [In($C_6F_5)_4$]- 음이온 화합물을 합성하였으나, 이들 indium(III) 음이온 화합물들은 온도에 민감하고 습기에 대해 불안정하다. 안정한 indium(III) 음이온 착물은 PNPCl(PNP=bis(triphenylphosphino)ammonium)과의 양이온 치환반응시켜 얻었으며, 관 크로마토 그래피를 이용하여 분리 정제하였다. 합성된 화합물의 특성은 핵자기 공명 분석법, 적외선 분광분석법, 분자량 측정, DTA/TG 그리고 원소분석법을 이용하여 조사하였다.

• 한국대기환경학회지
• /
• 제19권6호
• /
• pp.679-687
• /
• 2003

In this study, we investigated the analytical techniques to quantify the ambient concentration of hydrogen sulfide (H$_2$S) in air at ppt concentration level. For this purpose, an on-line GC analytical system equipped with both pulsed-flame photometric detector (PFPD) and thermal desorption unit (TDU) was investigated by collecting ambient air samples. The results of our study generally indicated that calibration conditions of GC system is highly sensitive to affect the accuracy of the analytical technique. Most importantly. we found that the use of different matrices in the the preparation stage of working standards was sensitive to control the overall performance of this technique. The calibration of our analytical system was tested by the two types of working standard (prepared by mixing either with high purity $N_2$ or with the ambient air). According to this test, the latter represented more efficiently the detecting conditions of actual air samples. The peak occurrence patterns of both air samples and standards (prepared by mixing with ambient air) were altered in a similar manner as the function of the loaded volume; however, it was not the case for the $N_2$-mixed standards. Results of our study suggest that detection of H$_2$S is highly different from other sulfides and that its quantification requires minimiaing interfering effects of non -pure substance (like water vapor) and (either sorptive or destructive) loss effects.

• 한국응용과학기술학회지
• /
• 제22권3호
• /
• pp.281-288
• /
• 2005

The silica nanoparticles were used as support of catalyst, filling material, electronic assembler, thin film material, and sensor material. And, the titania nanoparticles were used as pigment, dielectric substance, sensor and photocatalyst. In this paper, the spherical composite particles of $TiO_2/SiO_2$with narrow size distribution and phase pure were synthesized by ultrasonic spray pyrolysis method from $TiOSO_4$ and colloidal silica solution. Using ultrasonic apparatus, this starting solution was vaporized to droplets, and these droplets were induced into tube furnace by carrier gas. The resulting composite powder was characterized by scanning electron microscopy, X-ray diffraction analysis, TG-DTA, in vitro sun protection factor(SPF) and BET surface area analysis.

• 설비공학논문집
• /
• 제19권6호
• /
• pp.457-463
• /
• 2007

Various correlations of saturated vapor density in a truncated power series form are tested and compared in this study. Saturated vapor density correlation can be expressed relating logarithmic reduced density to the reduced temperature. Five types of correlation has been investigated using saturated vapor density data for 22 pure substance refrigerants from ASHRAE (American Society of Heating, Reftigerating and Air-Conditioning Engineers, Inc.) property tables and NIST (National Institute of Standards and Technology) Chemistry Webbook. Correlations are fitted to the data points by least squares method. Data points are equally weighted. The best type of correlation among the five types is suggested. The results obtained indicate that the best correlations with 3, 4, and 5 terms yield average AAD's (Average Absolute Deviation) of 0.27%, 0.04%, and 0.02%, respectively, while widely used conventional correlations with 3, 4, and 5 terms yield those of 1.19%, 0.61%, and 0.17%. The suggested type of correlation could reduce the number of terms while improving performance.

• 한국안전학회지
• /
• 제32권2호
• /
• pp.66-71
• /
• 2017

The autoignition temperature (AIT) is crucial combustible characteristics which need attention in chemical process that handle hazardous materials. The AIT, also to as minimum spontaneous ignition temperature(MSIT), is the lowest temperature of a hot surface at which the substance will spontaneously ignite without any obvious sources of ignition such as a spark or flame. The AIT may be used as combustion property to specify operating, storage, and materials handling procedures for process safety. This study measured the AITs of n-propanol+acetic acid system from ignition delay time(time lag) by using ASTM E659 apparatus. The AITs of n-propanol and acetic acid which constituted binary system were $435^{\circ}C$ and $212^{\circ}C$, respectively. The experimental AITs of n-propanol+acetic acid system were a good agreement with the calculated AITs by the proposed equations with a few A.A.D.(average absolute deviation). In the case of n-propanol and acetic acid system, the minimum autoignition temperature behavior (MAITB), which is lower than the lower AIT, is shown among the two pure substances constituting the mixture.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제21권2호
• /
• pp.169-174
• /
• 2010

Hydrolysate silk fibroin (HSF) is a fibrous protein composed of parallel $\beta$-structures and is made from pure silk elements including 18 amino acids, with glycine, alanine, and serine comprising of over 80% of the amino acids. Numerous studies have documented a range of effects of HSF, including moisturizing, antioxidant activity, nervous system disorders, and many more. We investigated whether HSF has anti-obesity effects in vitro. The effects of HSF inhibition on lipid accumulation and acceleration of lipid degradation in 3T3-L1 cells were studied. Treatment of 3T3-L1 cells with HSF caused significant inhibition of cell viability, an increase in glycerol release, and a decreased in adipocyte differentiation. Moreover HSF stimulated downregulated of adipogenic enzyme expressions (PPAR${\gamma}$ and C/EBP${\alpha}$) and up-regulated of fatty oxidation enzyme expressions (CPT-1 and UCP-2). Based on these results, hydrolysate silk fibroin can be suggested as a potential therapeutic substance as part of a prevention or treatment strategy for obesity.