• Journal of Fisheries and Marine Sciences Education
• /
• v.14 no.2
• /
• pp.177-190
• /
• 2002

An experimental study was carried out to make clear heat transfer characteristics in flow boiling of binary mixtures of refrigerants R134a and R123 in a uniformly heated horizontal tube. Experiments were run at a pressure of 0.6 MPa both for pure fluids and mixtures in the ranges of heat flux $10{\sim}50{kW/m}^2$, vapor quality 0~100% and mass flux 150-600 $kg/m^2s$. Heat transfer coefficients of mixtures were reduced compared to the interpolated values between pure fluids both in the low quality region where the nucleate boiling is dominant and in the high quality region where the convective evaporation is dominant. Total pressure drop during two-phase flow boiling in a horizontal tube consists of the sum of two components, that is, the frictional pressure drop and pressure drop due to acceleration. The frictional pressure drop is the most difficult component to predict, and makes the most important contribution to the total pressure drop. On the other hand, the acceleration pressure drop resulting from the variation of the momentum flux caused by phase change is generally small as compared to the frictional pressure drop. There is no significant difference in measured pressure drop between mixtures and pure fluids. The correlation of Martinelli and Nelson predicted most of the present data both for pure and mixed refrigerants within 30%.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.9
• /
• pp.597-603
• /
• 2017

In this study, experiments were conducted on the MFB(minimum film boiling) point of highly heated vertical metal rod quenched in aqueous surfactant solution at various temperature conditions. The aqueous Triton X-100 solution(100 wppm) and pure water were used as the liquid pool. Their temperatures ranged from $77^{\circ}C$ to $100^{\circ}C$. A stainless steel vertical rod of initial center temperature of $500^{\circ}C$ was used as a test specimen. In both liquid pools, as the liquid temperature decreased, the time to reach the MFB point decreased with a parallel increase in the temperature and heat flux of the MFB point. However, over the whole present temperature range, in the aqueous Triton X-100 solution, the time to reach the MFB point was longer, while the temperature and heat flux of the MFB point were reduced when compared with pure water. Based on the present experimental data, this study proposed the empirical correlations to predict the MFB temperature of a high temperature vertical metal rod in pure water and in aqueous Triton X-100 solution.

• Archives of Plastic Surgery
• /
• v.39 no.3
• /
• pp.204-208
• /
• 2012

Background : Isolated pure blowout fractures are clinically important because they are the main cause of serious complications such as diplopia and limitation of extraocular movement. Many reports have described the incidence of blowout fractures associated with diplopia and limitation of extraocular movement; however, no studies have statistically analyzed this relationship. The purpose of this study was to demonstrate the correlation between the location of isolated pure blowout fractures and orbital symptoms such as diplopia and limitation of extraocular movement. Methods : We enrolled a total of 354 patients who had been diagnosed with isolated pure blowout fractures, based on computed tomography, from June 2008 to November 2011. Medical records were reviewed, and the prevalence of extraocular movement limitations and diplopia were determined. Results : There were 14 patients with extraocular movement limitation and 58 patients complained of diplopia. Extraocular movement limitation was associated with the following findings, in decreasing order of frequency: floor fracture (7.1%), extended fracture (3.6%), and medial wall (1.7%). However, there was no significant difference among the types of fractures (P=0.60). Diplopia was more commonly associated with floor fractures (21.4%) and extended type fractures (23.6%) than medial wall fractures (10.4%). The difference was statistically significant (Bonferroni-corrected chi-squared test P<0.016). Conclusions : Data indicate that extended type fractures and orbital floor fractures tend to cause diplopia more commonly than medial wall fractures. However, extraocular movement limitation was not found to be dependent on the location of the orbital wall fracture.

• The Pure and Applied Mathematics
• /
• v.9 no.1
• /
• pp.63-72
• /
• 2002

An inverse interpolation problem for rational matrix functions with a certain type of symmetricity in zero-pole structure is studied.

• The Pure and Applied Mathematics
• /
• v.17 no.4
• /
• pp.341-346
• /
• 2010

Category $E({\Omega},A)$ forms a topos. We study on some properties of the topos $E({\Omega},A)$. In particular, we show that $E({\Omega},A)$ is well-pointed.

• Journal of Korean Academy of Nursing
• /
• v.25 no.1
• /
• pp.88-98
• /
• 1995

The Fluid and electrolytes balance in the body is of critical importance in maintaining good health. When the fluid and electrolyte imbalance is present, patients are in great danger. They must be assessed immediately by a nurse so that appropriate treatment can be started as soon as possible. Patients' fluid intake and output records contain highly important information for the diagnosis and treatment of fluid imbalance, but, these records are often inaccurate and the method of recording the fluid intake is not universal for every hospital. Be-cause they are few quantitative measurements of a patient's hydration, the need to improve the accuracy of fluid intake records is very important. However, very few studies have been done to investigate the accuracy of measurements of patients' fluid intake and output. The purpose of this study was to investigate the methods used for calculation of fluid intake which is most similar to fluid output in normal adults and hospitalized patients. This study focused on three different calculation methods for fluid intake and compared these to fluid output and developed suggestions as to the ideal way to record fluid in-take. Data for 43 hospitalized patients and 37 normal adults were analyzed. The findings of this study are as follows ; 1) In normal adults, the daily intake of water which enteres by the oral route was 2415m1 (the first method of calculation). The daily intake of water in the form of pure water or some other beverage was 1365m1 (the third method of calculation) The daily intake of water including fresh fruits and vegetables, rice, porridges, and Me m which have water content more than 80% were 2186m1 (the second method of calculation). 2) The urine output of the normal adults was 1350m1. This apprroximates the amount of fluid an adult takes in the form of pure water. 3) In patient group, the total intake of water was 2550m1 (the first method of calculation). The in-take of water in the form of pure water or as some other beverage and IV fluid was 1661m1 (the third method of calculation). The daily in-take of water including foods which have high water content was 2356m1 (the second method of calculation). 4) The urine output of the patient's group was 1728m1. This approximates the amount of fluid an adult takes in the form of pure water. 5) Investigation of the method of calculation of the patient fluid intake showed that among the 31 hospitals studied, only eight use the third method of calculation which reflects the most close value to urine output. From the results obtained in this study, it was indicated that the amount of fluid taken in the form of pure water reflects the most close value to urine output. Therefore, it can be suggested that the third method of calculation which includes water in-take only in the form of pure water or beverage should be used as patients' fluid intake record.

• Journal of Food Hygiene and Safety
• /
• v.13 no.1
• /
• pp.24-28
• /
• 1998

Korean sesame oil mixed with corn oil and Chinese sesame oil were subjected to instrumental determination for fatty acid composition, sesaminol and sesamin contents, and induction period by AOM test to obtain basic data for ascertaining the truth of pure sesame oil, respectively. In sesame oil mixed with corn oil, stearic acid content of sesame oil containing above 20% corn oil was remarkably discriminated from that of pure sesame oil. Oleic and linoleic acid contents of sesame oil with 10% corn oil were significantly differnt from that of pure sesame oil. Stearicllinoleic acid ratio of sesame oil mixed with corn oil dcreased in proportion to corn oil content in sesame oil. Sesamolin and sesamin contents of sesame oil containing 30% corn oil were lower 18.3% and 21.0% than those of pure sesame oil, respectively. Induction periods of sesame oil by AOM were 8.14~9.24 hrs in Chinese sesame oil and sesame oils including 20% and 40% corn oils, but around 16hrs in Korean pure sesame oil. Based on the above results, it is considered that the comparisons of fatty acids, sesaminol and sesamin contents, and induction period by AOM test might be one of the potential criteria in discriminating between pure sesame oil and sesame oil mixed with corn oil.

• Journal of Families and Better Life
• /
• v.19 no.1
• /
• pp.95-110
• /
• 2001

Recently a number of large discount store and those of its users was increasing. The purpose of this study is to investigate the tendency of impulse buying and analyzes factors which influence impulse buying. The data had been collected from questionaries with 474 consumers who visit large discount store. The major statistical methods used for data analysis are frequency, percentile, mean, t-test, multiple regression analysis, one-way ANOVA, and Duncans multiple range test utilizing SPSS Win pc+program. The results of this study are as follows : 1. The four different kind of impulse buying is measured. The overall level of impulse buying is 2.76. Suggestion impulse buying(M=3.19) is the highest, and the lowest is pure impulse buying(M=2.66). 2. In the area of demographic variables is significantly different in the age of twenties and thirties(p<.05). A visit frequency and membership. In the area of in-store variables is significantly different by all factors at impulse buying except waiting time. Especially, point-of-purchase(POP) advertisement and discount sale are very important variables. A visit frequency and membership are significantly different in the area of consumer-related variables. 3. Waiting time, a visit frequency, a POP advertisement, and a discount sale have the positive effects on overall impulse buying. Pure impulse buying is influenced by shopping list, POP advertisement and a stores atmospher. Buying companion, membership, kind of store and waiting time have the effect on reminder impulse buying. Suggestion impulse buying is influenced by school career, shopping list and POP advertisement. Planned impulse buying is influenced by sex, POP advertisement, buying companion and discount sale.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.2
• /
• pp.330-342
• /
• 1998

The effect of rubber mold on densification behavior of pure iron powder was investigated under cold isostatic pressing. The thickness effect of rubber mold was also studied. The elastoplastic constitutive equation based on the yield function of Shima and Oyane was implemented into the finite element program(ABAQUS) to predict compaction responses of metal powder under cold isostatic pressing. The hyperelastic constitutive equation based on Moony-Rivlin and Ogden strain energy potentials was also employed to analyze deformation of rubber mold. The coefficients of the strain energy potentials were obtained from tension and volumetric compression data of rubber. Finite element results were compared with experimental data for densification of pure iron powder under cold isostatic pressing.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.81.1-81.1
• /
• 2017

L1251B is an excellent example of a small group of pre- and protostellar objects in low-mass star-forming region. Previous interferometer data with a high angular resolution resolved the outflows associated with L1251B into a few components. To understand the physical conditions of the protostellar outflows in L1251B, we mapped this region spectroscopically with Spitzer/IRS and obtained spectral line data from Herschel/PACS. Spitzer/IRS provides the S(0)-S(7) pure rotational lines of H2 as well as fine-structure emissions produced in shocks such as S, [Si II], and [Fe II] and it is a powerful tool for studying shocked interstellar gas. In addition, [O I] lines observed with Herschel/PACS are described well by J-type shock models expected in the outflows from protostars. We will present an analysis of the L1251B protostellar outflow in the H2 pure rotational lines and fine-structure emissions.