• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.5
• /
• pp.555-566
• /
• 1999

The rainwater samples were collected from the 1100 Site of Mt. Halla and Cheju city during the period of March in 1997 to August in 1998, and the major soluble ions were analyzed. The confidence of analytical data was confirmed by using the comparison methods such as ino-balance, electric conductivity and acid fraction, all of which correlation coefficients were above 0.94. The ionic strengths lower than $10^{-4}$ M, the basis for the pure rainwater, were found in 47% and 38% at 1100 Site and Cheju city, respectively. The precipitations in Cheju city were more influenced by the oceanic effect than those in 1100 Site. The acidity contribution was mainly by $SO_4^{2-}$ and $NO_3^-$ in both areas, and the organic acids have contributed to the acidity with only 5~7%. The neutralization factors by $NH_3$ were about 46% at both 1100 site and Cheju city, whereas those by $CaCO_3$ were 11% and 15% at 1100 site and Cheju city respectively, and the free acidity were both about 35% in average. From the MSA analysis, it was found that the air in Cheju island has been influenced by the pollution from the other areas. The sources of the rainwater components in 1100 Site and Cheju city were also studied with a factor analyzing way, and the most probable factors were found to be anthropotgenic, oceanic, and soil-sourced. The results of multiple regression analysis have shown that $SO_4^{2-}$ was dissolved mostly in the form of $H_2SO_4, CaSO_4 and (NH_4)_2SO_4$, and $NO_3^-$ was in the form of $HNO_3, Ca(NO_3)_2 and NH_4NO_3$.

• Journal of Adhesion and Interface
• /
• v.7 no.4
• /
• pp.32-38
• /
• 2006

A series of organic-inorganic hybrids, PCL/EP/$SiO_2$, involving epoxy resin and triethoxysilane-terminated polycaprolactone elastomer (PCL-TESi) were prepared via polymerization of diglycidyl ether of bisphenol A (DGEBA) with amine curing agent KB-2 and sol-gel process of PCL-TESi. The curing reactions were started from the initially homogeneous mixture of DGEBA, KB-2 and the PCL-TESi. The organicinorganic hybrids containing up to 4.95% (wt) of $SiO_2$ were obtained and characterized by FT-IR, transmission electron microscopy (TEM), differential scanning calorimetry (DSC) and thermogravimetry analysis (TGA). It was experimentally shown that the swelling property in toluene, morphologies and thermal properties of the resulting hybrids were quite dependent on the contents of $SiO_2$. The crosslink network density decreases with increasing of the PCL-TESi. And in TEM, the phase separated morphology of these hybrids was found, which resulted from the coagulation of Si-O-Si networks resulting from $-Si(OC_2H_5)_3$ of PCL-TESi self-curing by hydrolytic silanol condensation, with the advancement of the curing reaction in the modified epoxy resin systems. Meanwhile, the change of the $SiO_2$ content made the morphologies changed from aggregated particles of Si-O-Si in the hybrid to nanocluster of interconnected Si-O-Si particles, then to aggregated Si-O-Si dispersing in the continuous cured epoxy phase again, and last to co-continuous interpenetrating network. The glass transition behavior of the hybrid material was cooperative motion of large chain segments, which were hindered by the inorganic Si-O-Si network. And in TG analysis, the characteristic temperature at 5% of weight loss was evidently increased from $120.5^{\circ}C$ of pure cured epoxy to $277.6^{\circ}C$ of 3.84% (wt) of $SiO_2$ modified epoxy due to the existence of Si-O-Si when PCL-TESi was added in the hybrid.

• Journal of Ginseng Research
• /
• v.44 no.6
• /
• pp.784-789
• /
• 2020

Background: The separation of isomeric compounds from a mixture is a recurring problem in chemistry and phytochemistry research. The purification of pharmacologically active ginsenoside Rb₃ from ginseng extracts is limited by the co-existence of its isomer Rb₂. The aim of the present study was to develop an enzymatic elimination-combined purification method to obtain pure Rb₃ from a mixture of isomers. Methods: To isolate Rb₃ from the isomeric mixture, a simple enzymatic selective elimination method was used. A ginsenoside-transforming glycoside hydrolase (Bgp2) was employed to selectively hydrolyze Rb₂ into ginsenoside Rd. Ginsenoside Rb₃ was then efficiently separated from the mixture using a traditional chromatographic method. Results: Chromatographic purification of Rb₃ was achieved using this novel enzymatic elimination-combined method, with 58.6-times higher yield and 13.1% less time than those of the traditional chromatographic method, with a lower minimum column length for purification. The novelty of this study was the use of a recombinant glycosidase for the selective elimination of the isomer. The isolated ginsenoside Rb₃ can be used in further pharmaceutical studies. Conclusions: Herein, we demonstrated a novel enzymatic elimination-combined purification method for the chromatographic purification of ginsenoside Rb₃. This method can also be applied to purify other isomeric glycoconjugates in mixtures.

• Polymer(Korea)
• /
• v.31 no.6
• /
• pp.479-484
• /
• 2007

In this study, the hybrid ion exchange fibers (HIEF) were prepared by using web spraying muthod with hot melt adhesive. Characteristics of HIEF and their adsorption properties for ammonia gas were investigated. The ion exchange capacity (IEC) of HIEF was increased with increasing the resin contents and their values were higher than those of pure resin and ion exchange fabrics. The removal efficiency for ammonia gas increased with an increase in packing density of hybrid ion exchange fabrics in the column. The adsorption breakthrough time was 270 min, which was slower than those of the resin and fibers. The maximum value of adsorption for ammonia gas was 94%. The breakthrough time was also increased with increasing the concentration and flow rate of ammonia gas. The reaction constant(k) for ammonia gas was increased with increasing the concentration and flow rate of the gas, while it was decreased an the mass was increased.

• Journal of Communications and Networks
• /
• v.14 no.4
• /
• pp.451-460
• /
• 2012

Natural disasters often lead to regional failures that can cause network nodes and links co-located in a large geographical area to fail. Novel approaches are required to assess the network vulnerability under such regional failures. In this paper, we investigate the vulnerability of networks by considering the geometric properties of regional failures and network nodes. To evaluate the criticality of node locations and determine the critical areas in a network, we propose the concept of ${\alpha}$-critical-distance with a given failure impact ratio ${\alpha}$, and we formulate two optimization problems based on the concept. By analyzing the geometric properties of the problems, we show that although finding critical nodes or links in a pure graph is a NP-complete problem, the problem of finding critical areas has polynomial time complexity. We propose two algorithms to deal with these problems and analyze their time complexities. Using real city-level Internet topology data, we conducted experiments to compute the ${\alpha}$-critical-distances for different networks. The computational results demonstrate the differences in vulnerability of different networks. The results also indicate that the critical area of a network can be estimated by limiting failure centers on the locations of network nodes. Additionally, we find that with the same impact ratio ${\alpha}$, the topologies examined have larger ${\alpha}$-critical-distances when the network performance is measured using the giant component size instead of the other two metrics. Similar results are obtained when the network performance is measured using the average two terminal reliability and the network efficiency, although computation of the former entails less time complexity than that of the latter.

• Applied Chemistry for Engineering
• /
• v.24 no.4
• /
• pp.375-381
• /
• 2013

Kinetics data were obtained for steam reforming of methane and natural gas over the commercial nickel catalyst. Variables for the steam reforming were the reaction temperature and partial pressure of reactants. Parameters for the Power law rate model and the Langmuir-Hinshelwood model were obtained from the kinetic data. As a result of the reforming reaction using pure methane as a reactant, the reaction rate could be determined by the Power law rate model as well as the Langmuir-Hinshelwood model. In the case of methane in natural gas, however, the Langmuir-Hinshelwood model is much more suitable than the Power law rate model in terms of explaining methane reforming reaction. This behavior can be attributed to the competitive adsorption of methane, ethane, propane and butane in natural gas over the same catalyst sites.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.9
• /
• pp.3753-3758
• /
• 2015

Background: Polymeric nanoparticles are attractive materials that have been widely used in medicine for drug delivery, with therapeutic applications. In our study, polymeric nanoparticles and the anticancer drug, chrysin, were encapsulated into poly (D, L-lactic-co-glycolic acid) poly (ethylene glycol) (PLGA-PEG) nanoparticles for local treatment. Materials and Methods: PLGA: PEG triblock copolymers were synthesized by ring-opening polymerization of D, L-lactide and glycolide as an initiator. The bulk properties of these copolymers were characterized using 1H nuclear magnetic resonance spectroscopy and Fourier transform infrared spectroscopy. In addition, the resulting particles were characterized by scanning electron microscopy. Results: The chrysin encapsulation efficiency achieved for polymeric nanoparticles was 70% control of release kinetics. The cytotoxicity of different concentration of pure chrysin and chrysin loaded in PLGA-PEG ($5-640{\mu}M$) on T47-D breast cancer cell line was analyzed by MTT-assay. Conclusions: There is potential for use of these nanoparticles for biomedical applications. Future work should include in vivo investigation of the targeting capability and effectiveness of these nanoparticles in the treatment of breast cancer.

• Elastomers and Composites
• /
• v.33 no.3
• /
• pp.193-200
• /
• 1998

It is well known that EPDM(ethylene propylene diene monomer) rubber has inherently excellent resistance to the weathering, ozone, heat, cold and moisture, whereas crosslinked IIR (isobutylene isoprene divlnyl benzene terpolymer) shows proper resistance to the water and gas permeation. Various characteristics of EPDM blend with crosslinked IIR such as curing characteristics, mechanical properties, dispersion of minor component and gas impermeability were explored. The optimum curing time $(t_{90})$ examined with peroxide was decreased by adding small amount of crosslinked IIR to the EPDM rubber. Mechanical properties of blends such as tensile strength, hardness and elongation at break were enhanced by increasing EPDM content. These results might be explained with the affinity of carbon black to the EPDM rubber. On the other hand, the physical properties were not changed significantly after aging, and the increase of crosslinked IIR fraction caused the decrease of compression set to small rate. EPDM rubber shows different behavior with crosslinked IIR in oxygen permeability. By adding 30wt.% crosslinked IIR to the EPDM rubber, the resistance to the oxygen permeation was improved up to three times than that of pure EPDM rubber. Conclusively, EPDM blend containing 30wt.% crosslinked IIR might be commercially applied to the o-ring and electric parts because of its proper resistance to the weathering, ozone and oxygen permeability.

• KSBB Journal
• /
• v.19 no.1
• /
• pp.1-11
• /
• 2004

Chlorella contains a rich source of biochemical products with applications in the feed, food, nutritional, cosmetic, pharmaceutical and even fuels industries. Chlorella is one of unicellular green algae and is mostly grown in fresh water such as pond and lake. It grows in a manner of nonsexual reproduction so that it multiplies 4~16 times overnight. Large-scale culture is conducted by open pond culture or pure culture using fermenter. Chlorella has various efficacies such as heavy metal removal, degradation of toxic materials, control of arteriosclerosis, immunoprotective effects, anticancer activity and growth-stimulating activity of intestinal bacteria. Chlorella can be used as a taste enhancer and foodstuff, as it has a plenty of essential amino acids, polyunsaturated fatty acids, sterols and chlorella growth factor (CGF). Chlorella is a potential organism which can be utilized for CO$_2$ removal and H$_2$ Production in environmental area and energy Production.

• Journal of Korean Neurosurgical Society
• /
• v.46 no.4
• /
• pp.385-388
• /
• 2009

Objective : We analyzed the methylation status of the O6-methylguanine-DNA methyltransferase (MGMT) gene promoter in World Health Organization (WHO) grade III gliomas in association with other molecular markers to evaluate their prevalence. Methods : The samples of a total of 36 newly WHO grade III glioma patients including 19 anaplastic oligodendrogliomas (AO), 7 anaplastic oligoastrocytomas (AOA), and 10 anaplastic astrocytomas (AA) were analyzed. The methylation status of the MGMT gene promoter was confirmed by methylation-specific polymerase chain reaction. The 1p/19q chromosomal deletion status and EGFR amplification were assessed by Fluorescence In-Situ Hybridization. MGMT, EGFR, EGFRvlll, and p53 expression were analyzed by immunohistochemical staining. Results : The MGMT gene promoter was methylated in 32 (88.9%) and unmethylated in 4 (11.2%) Among them, all of the AO and AOA had methylated MGMT gene promoter without exception. Significant associations between MGMT gene promoter hypermethylation and 1p/19q deletion was observed (p=0.003). Other molecular markers failed to show significant associations between MGMT gene promoter statuses. Conclusion : There was extensive epigenetic silencing of MGMT gene in high grade gliomas with oligodendroglial component. Together with frequent 1p/19q co-deletion in oligodendroglial tumors, this may add plausible explanations supporting the relative favorable prognosis in oligodendroglial tumors compared with pure astrocytic tumors.