• Membrane Journal
• /
• v.34 no.2
• /
• pp.132-139
• /
• 2024

The ion exchange resin used to remove total dissolved solids (TDS) is used by being packed in a column, and sufficient contact time between the ionic material and the ion exchange resin is required during the ion exchange process. In this study, the ion exchange resin that exhibits high TDS reduction even with a short contact time through pulverization of the ion exchange resin was characterized. The optimal size of resin considering flowability was over 100 ㎛. The highest pulverizing yield were obtained that 250~500 ㎛ size and 100~250 ㎛ size were 67.3% and 36.9%, respectively. Also, the highest yield and the pulverizing time of 100~500 ㎛ size was 87.1% and 2 minutes, respectively. Under batch test conditions, the time to reach a removal rate of 95% and 99% for 250~500 ㎛ resins was 1.82 and 1.96 times faster than non-pulverized ion exchange resin, respectively. The 100~250 ㎛ resins showed 15.9 times and 6.18 times faster, respectively. Under the column test, a total of 1.74 g of NaCl was removed by non-pulverized ion exchange resins, 1.83 g of NaCl was removed by 250~500 ㎛ resins and 1.63 g of NaCl was removed by 100 and 250 ㎛ resins. As the size of the resin decreased, the capacity slightly decreased. As a result, it was observed that the pulverized ion exchange resins could be a method of achieving high TDS removal performance under short contact time.

• 연구논문집
• /
• s.34
• /
• pp.121-129
• /
• 2004

The influence of powder size and ball-milling time on the magnetic properties of $Fe_{73}Si_{16}B_7Nb_3Cu_1$ nanocrystalline alloy powder was investigated. Flake-shaped powders were produced by pulverizing the ribbons annealed at $550^\circC$ for 1 hour. The powders were classified and consolidated into core shapes at a pressure of 18ton/$cm^2$. The initial permeability at 100kHz of the inductor core produced using $53-75\mum$ powders showed the highest value although its consolidated density showed the lowest one. The reason for the result is due to the cracking of the particles larger than $75\mum$ during the consolidation process. The ball-milling of powders for 2-4 hours improved the consolidation density and the initial permeability of the cores. The intrinsic coercivity of the powder decreased as well, resulting from the stress relief of the powder by a short-time milling.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.4
• /
• pp.315-320
• /
• 1994

This survey report introduced briefly peat deposits in SAKHALIN island of eastern SIBERIA continent. Peat industry was promoted as leading resources for development in this island by national control economic plan of central government before CIS. But development of deposit was left suspension of operation due to investment now. In southern area, about 10km from Yuzunosakhalinsk, two deposits of peat field were explored. One of them (Troisk) was suspended at begining stage of peat harvest from 300ha field and the other(Missilop) was producing the compact peat through drying and pulverizing from 350ha peat field which showed long run harvest activities. There are plenty of peat deposits near the Polonai Reika (river) in the central area of this island, At Zbaikaritz, 40km nothern area from Polonaisk, 135ha of peat field was developed. This field was left without working but established field preparation and could be able to be harvested any time if machines and utlities were settled. At southern suburb 10km from Polonaisk, about 40ha field of virgin deposit has been established planning for development. The plan involved estimated amount of peat, deposit depth, water level, drainage and leading road. The most of peat deposits accumulated from sphagnum moss. Texture is coarse but it contains more than 95% of organic carbon near to 0.5% of total nitrogen and acidity showed pH4-5.

• Carbon letters
• /
• v.12 no.4
• /
• pp.243-248
• /
• 2011

Two different types of graphite, such as flake graphite (FG) and spherical graphite (SG), were used as anode materials for a lithium-ion secondary battery in order to investigate their electrochemical performance. The FG particles were prepared by pulverizing natural graphite with a planetary mill. The SG particles were treated by immersing them in acid solutions or mixing them with various carbon additives. With a longer milling time, the particle size of the FG decreased. Since smaller particles allow more exposure of the edge planes toward the electrolyte, it could be possible for the FG anodes with longer milling time to deliver high reversible capacity; however, their initial efficiency was found to have decreased. The initial efficiency of SG anodes with acid treatments was about 90%, showing an over 20% higher value than that of FG anodes. With acid treatment, the discharge rate capability and the initial efficiency improved slightly. The electrochemical properties of the SG anodes improved slightly with carbon additives such as acetylene black (AB), Super P, Ketjen black, and carbon nanotubes. Furthermore, the cyclability was much improved due to the effect of the conductive bridge made by carbon additives such as AB and Super P.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1154-1157
• /
• 2003

The spent fuel slitting device is an equipment developed for the separation of the pellet and hull from the cutting fuel rod with length of 250 mm, and in order to feed UO$_2$ pellet. We have analyzed on the existing technologies for designing and producing of the slitting device in the first year(2001), based on these results, designed and produced the rod slitting device. It has effectively separated the pellet from the hull, but demanded the supplement separation work because of the mixing with pellet and hull in the vessel, and required the condition for the reducing time of the process. In the second year(2002), we have reduced the work time, performed the test and capacity evaluation with the improving device, based these results, and ensured the data demanded for designing of the spent fuel rod slitting device. We have compared with the DUPIC(Direct use of spent PWR fuel in CAND reactors) process, and developed the device for the purpose of reducing over 40 % in comparition with the DUPIC operation time(5 minutes). Based on these results, it will is effectively applied to available data for designing and producing of the hot test facility.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.1
• /
• pp.153-161
• /
• 2015

This study measured the functionality and quality characteristics of rice noodles pulverizing Cedrela sinensis leaves, whose antioxidant effects and various bioactive components were confirmed, and then producing rice noodles with different amounts of Cedrela sinensis powder. Total phenolic contents of Cedrela sinensis rice noodles, the control group lowest phenolic content, significantly increased as the amount of Cedrela sinensis powder increased. DPPH free radical scavenging activity was lowest in the control group and significantly increased as Cedrela sinensis powder content increased. In the sensory evaluation, all items significant differences, and 1% content specimen showed the highest values overall acceptability including color, appearance, taste and texture but not flavor. The possibility of developing rice noodles with Cedrela sinensis powder and rice noodles with functionality were confirmed through the above results.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.4
• /
• pp.53-58
• /
• 2014

Vacuum pump transfers waste that is pulverized by integrated macerator. For this reason, unlike ordinary pump systems, there is a rotating macerator ahead of impeller for pulverizing. It is hard to predict numerical solution because area of Inlet flow path changes according to the rotation angle of the integrated macerator. So, in this study, the verification of performance evaluation method of Marine vacuum pump were numerically studied by commercial ANSYS CFX 13.0 software. We select a model of performance evaluation for study, and we analyze change of inlet flow path of integrated macerator according to rotation angle. We generate 5 model sets according to rotation angle of the integrated macerator. And we evaluate their performance by numerical analysis. Then, we analyze internal flow field and performance according to rotation angle of the integrated macerator based on numerical analysis result. In addition, we compared with experimental data for validity of numerical result by using steady state analysis.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.133-136
• /
• 2007

This study investigates mechanical properties of the concrete using fine particle cement which is manufactured by the pulverizing process. The variable factors are 3 types of W/C such as 40, 50, and 60%, 3 types of curing temperature such as 5, 20, and $35^{\circ}C$, and 5types of the replacement of the fine particle cement such as 0, 25, 50, 75, and 100%. The unit water content, S/a and amount of the SP and AE agents to secure the slump and air content is gradually increased in accordance with amount of replacement. It can be confirmed that the delay of the setting time depending on FC content is decreased corresponding to FC content, so the effect of the acceleration to the setting time is expected. The compressive strength corresponding to FC content is proportionally increased, and the growth is confirmed about $30{\sim}40%$ at a day in 50% of FC contents. However, the increase of the strength is gradually decreased in accordance with increasing age.

• Journal of Power System Engineering
• /
• v.18 no.6
• /
• pp.34-39
• /
• 2014

In this study, the structural analysis and the modal analysis are conducted to investigate the stress level, the deformation characteristics and the natural modes of the casing of a planetary gear reducer for a 800kW grade pulverizer mill. The casing is subjected to the load, 2800 kN, from the lump coals in the pulverizing process. Because of the symmetry, the half portion of the reducer casing is modeled for the stress analysis. But the full model is used to find out the eigenvalues and natural modes for the modal analysis. The contact conditions are applied between the thrust pad bearing and the adjacent contacting parts. The results shows that the casing structure has the sufficient strength and stiffness to support the load under consideration. ANSYS version 15 is employed to perform the numerical study.

• The Korean Journal of Community Living Science
• /
• v.15 no.3
• /
• pp.107-112
• /
• 2004

Many studies have showen that Letinus edodes have a reducing effects on blood pressure and lipid levels in animals with high blood pressure and hyperlipidemia. But the only cap has been on the market as goods and the stipe has been wasted. The price is very variable and is based on harvest time and the part of the plant currenty, there is not much information about the nutritional composition and bio-fuctional effects of Letinus edodes based on harvest time and part. Some farmers have been selling the powder seasoning by drying and pulverizing Letinus edodes including stipe to develop value added, late harvested Letinus edodes and its stipe these days. This study was conducted to investigate and compare the nutritional composition of Letinus edodes harvested at different times (early: E, late: L) and separated by part (cap: C, stipe: S). The 4 kinds of materials were named as early harvested cap (EC) and stipe (ES), and late harvested cap (LC) and stipe (LS) samples were obtained from Mungyeong City Agricultural Technology & Extension Center. The composition analysis of the nutrients in the 4 materials was conducted by using the AOAC method. The proximate components (moisture, protein, fat, fiber, ash, and carbohydrates), minerals and vitamin content were measured. Nutritional composition of Lentinus edodes did not show any significant difference between early and late harvested mushrooms. Nutritional compositions were different according to part. The results demonstrate that the late harvested stipe can also be used as a quality food material.