• Applied Chemistry for Engineering
• /
• v.27 no.4
• /
• pp.371-379
• /
• 2016

In this article, the foamed body of glass was manufactured from the waste borosilicate glass produced by wet pulverization process without additional pretreatment which can be used as a recycling method for waste LCD panel glass. Each 100 g of pulverized waste borosilicate glass with the size of less than 270 mesh were mixed with 0.3 weight fraction of carbon and 1.5 weight fraction of $Na_2CO_3$, $Na_2SO_4$ and $CaCO_3$ and let them foamed for 20 minutes at $950^{\circ}C$ to manufacture the foamed body having the density of less than $0.3g/cm^3$. Additionally, adding $SiO_2$ or $H_3BO_3$ to the mixture enabled the foamed body to have efficient formation of open pores which showed the possibility for producing the foamed body with new functionalities such as sound absorption.

• Journal of the Korean earth science society
• /
• v.38 no.6
• /
• pp.421-426
• /
• 2017

In this study, we selected three representative granite samples and conducted petrological observation to establish the Korean geostandards. Samples were taken from the two Jurassic (KJG-1, KJG-2) and one Cretaceous (KCG-1) granites in South Korea. The powder samples were prepared by the standard pulverization process, and glass beads were made for geochemical analysis using X-ray fluorescence (XRF) method, and finally, major element contents of the samples were acquired. The analytical data are shown with mean, standard deviation and relative standard deviation. The accuracy of the analysis was confirmed within an estimated error range of about 5% by comparing the recommended true values of the USGS and GSJ geostandards. Also, we checked the analytical precision by calculating a relative standard deviation of about 3% from the XRF analytical results for the three samples.

• Journal of Sericultural and Entomological Science
• /
• v.17 no.1
• /
• pp.63-68
• /
• 1975

Flacherie of all other silkworm diseases greatly affects cocoon crop as it is far-reaching and wide spreading. Fleacherie which kills silkworms caused by bacteria can be classified as bacterial digestive organ disease, and "Sotto" disease. Bacterial digestive organ disease is caused by the bacteria living in the silkworms alementary canal and a majority of flacherie belongs to this disease. Septicemia is caused by bacterias breeding in silkworms body fluid but its attach is comparatively limited during the larva period. "Sotto" disease is caused by eating mulberry leaves infected with bacteria which produce toxin and silkworms are intoxicated and killed by the toxin. The cause of flacherie is mainly due to a poor environment. The unclean and unsanitary silkworm rearing beds help bacterias breeding and bacteria enter silkworms body through mouth organ or skin. The present study is to investigate various causes of flacherie by means of pulverization of silkworm. Filtrated fluid is extracted by centrifuge and hypodermic of peroral inoculation-is given to young and medium silkworms of spring and autumn. The gained results of the experiment are summarized as follows： 1. Silkworms infected with flacherie were pulverized and their filtrated fluid was extracted by centrifuge and inspected under microscope to find polyhedron from the fluid. 2. The experimenting group of peroral inoculation. a) From the third day of peroral inoculation silkworms appetite generally decreased and ate less compared with the control group. b) After 7 days of the inoculation silkworms suffered from empty head, loose bowels and fainting. c) Some of the silkworms still ate but as were shown in Fig. 3 and 4 some dwarfish silkworms were found. d) There was no remarkable difference between 1st and 2nd instar inoculation groups. e) There was a tendency that the number of diseased silkworms was decerased as the increase of instars. 2. The experimental group of hypodermic inoculation a) Both of 3rd and 4th instar inoculation groups showed no remarkable singularity and the number of diseased silkworms decreased. b) The rate of diseased silkworms was comparatively low because the body fluid was acidy or toxin was hard soluble. Hypodermic inoculation could not give much harm to the silkworms compared to peroral inoculation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.2
• /
• pp.24-28
• /
• 2006

Electrochemical hydrogenation/dehydrogenation properties were studied for a single particle of a Mm-based(Mm : misch metal) hydrogen storage alloy($MmNi_{3.55}Co_{0.75}Mn_{0.4}Al_{0.3}$) for the anode of Ni-MH batteries. A carbon fiber microelectrode was manipulated to make electrical contact with an alloy particle, and the cyclic voltammetry and the galvanostatic charge/discharge experiments were performed. A single particle of the alloy showed the discharge capacity of 280[mAh/g], the value being 90[%] of the theoretical capacity. Data were compared with that of the composite film consisting of the alloy particles and a polymer binder, which is more practical form for Ni-MH batteries. Additionally, pulverization of the alloy particles are directly observed. Compared with the conventional composite film electrodes, the single particle measurements using the microelectrode gave more detailed, true information about the hydrogen storage alloy.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.17 no.4
• /
• pp.350-364
• /
• 1995

As early as 1889, treatment of ostemyelitis was reported using xenogeneic demineralized bone. In 1965, Urist discovered that demineralized long bone fragment, even when implanted in nonskeletal tissue, would stimulate osteogenesis. The clinical use of demineralized bone of Oral and Maxillofacial surgery is not new. The demineralized bone implants were used for 1) interposition within osteotomy gaps, cystic detects, alveolar clefts ; 2) augmentation, over intact bone surfaces ; 3) construction of new bone within soft tissue. Demineralized bone grafts invokes a induced osteogenesis which is the transformation of host cells into osteoblasts. Demineralized bone has identified several factors that modulate the osteogeneic response : sterilization method, recipient age, particle size etc. Especially, pulverization of bone matrix may enhance its osteoinductive properties, to allow rapid, efficient bridging of large defects. the purpose of the present report was to describe the potential efficacy of demineralized allogeneic bone powder of skull of rabbits as a particle size ; 212 ${\mu}m$, 710 ${\mu}m$, 1 mm each other. Microscopic finding in our experimental studies shown that 710 ${\mu}m$ demineralized bone powder is the most potent osteogenic response, and then 212 ${\mu}m$, 1 mm size. Densitometric analysis shown that density of all group was continue to increase until 4 weeks after operation, and then continue to decrease.

• Transactions of the Korean hydrogen and new energy society
• /
• v.10 no.4
• /
• pp.191-196
• /
• 1999

4-probe resistivity measurement technique was used to study hydrogen A-D(Absorption-Desorption)kinetics on Pd films(18 to 67nm thick) from 25 to $50^{\circ}C$, from 0 to 5 torr hydrogen pressure. Pd films were made on sapphire substrate by thermal evaporation technique under high vacuum at room temperature. Upto about 100 hydrogen A-D cyclings, no pulverization was observed, but film was detached partially from substrate. Forward reaction and backward reaction rate were analyzed separately. The activation energies of hydrogen A-D processes were obtained from the Arrhenius plot of the reaction rates. The activation energies of Pd films are not strongly dependent on the thickness of the film. But the activation energy of very thin film( l8nm thick) was smaller than the others.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 1996.12a
• /
• pp.63-63
• /
• 1996

We performed chromosomal aberration assay in Chinese Hamster Lung (CHL) cells in vitro to evaluate theclastogenicity of 11 synthetic chemicals which were listed in Toxicity Evaluation Program of Ministry of Environment of Republic of Korea in 1996. All of the chemicals were carried out MTT assay to determine the 50% cell growth inhibition concentration. All compounds were tested with and without metabolic activation system. Benzoyl chloride revealed positive result at $43\;\mu\textrm{g}/m{\ell}$ in the presence of metabolic activation system, and at 30.8, 61.5 and $123\;\mu\textrm{g}/m{\ell}$ in the absence of metabolic activation system. And p-phenoxy ethanol was observed as positive with the metabolic activation system, but negative without metabolic activation system. Especially 2-propyn-l-ol showed high frequency of pulverization and showed critical difference of cytotoxicity between with and without S9 mixture. Pulverizatiuon is not included in the frequency of structural aberration in our criteria. Dicyclopentadiene, methacrylic acid, aa-dimethylbenzyl hydroperoxide, benzylbutyl phthalate, and p-chlorophenal were revealed negative results.esults.

• Transactions of the Korean hydrogen and new energy society
• /
• v.13 no.2
• /
• pp.151-158
• /
• 2002

The hydorgen storage alloys were produced by melting in arc melting furnace and then solution heat treated at $1,100^{\circ}C$ followed by pulverization. The chemical analysis on the samples showed that the major elements of misch metal(Mm) were La, Ce, Pr and Nd with impurity less than 1wt.%. X-ray diffraction indicated that the structure for these samples were a single phase of hexagonal with $CaCu_5$ type. Compared to the initial particle size $100{\sim}110{\mu}m$, the many fine cracks were found and particle size decreased to $14{\mu}m$ for $MmNi_{4.5}Mn_{0.5}$ after hydriding/dehydring test run. To activate the sample the vessel filled with hydrogen storage alloys was first evacuated for for at $70^{\circ}C$ and then treated for 10.5hr under hydrogen pressure of 20atm for $MmNi_{4.5}Mn_{0.5}$ alloy. The experimental data showed that the hydrogen storage alloy of $MmNi_{4.5}Mn_{0.5}$ had superior adsorption and description properties within a temperature rang of $40^{\circ}C{\sim}80^{\circ}C$ and also they had a good P-C-T curve.

• Korean journal of food and cookery science
• /
• v.30 no.3
• /
• pp.262-270
• /
• 2014

This study was conducted in order to investigate the properties of bread making and quality improvement when wheat flour is replaced with whole waxy sorghum flour. Sorghum flour, which was prepared with two types of milling methods of pin mill and ultra fine pulverization, was used at different levels ranging from 10, 20 and 30%, respectively. The pasting properties of peak viscosity, setback viscosity and pasting temperature of the composite flour containing pin-milled sorghum flour were higher than those of ultra fine pulverized sorghum flour. The volumes of sorghum bread were lower than that of wheat bread; moreover, they gradually decreased with increasing amounts of sorghum flour, which has inferior dough properties and therefore collapses in the oven. The use of vital gluten (12% based on sorghum flour weight) and emulsifier (SSL; sodium stearoyl lactylate) increased the extensibility and resistance to the extension of the dough, thereby improving its rheological properties. Thus, the oven spring of bread containing sorghum was improved, demonstrating as loaf volume increase up to 15%. However, in the case of breads containing 30% sorghum flour, the loaf volumes were still unacceptably low. Therefore, the formula and the bread making process were further modified as follows: An increase of vital gluten ($12%{\rightarrow}18%$) and shortening ($3%{\rightarrow}6%$), a decrease of mixing time and dough fermentation temperature, and the addition of sorghum flour after gluten development during mixing. The above modifications resulted in the improvement of sorghum bread quality. Therefore, we suggest that pin-milled sorghum flour is more appropriate than ultra fine pulverized sorghum flour for making bread.

• Food Science and Biotechnology
• /
• v.15 no.1
• /
• pp.152-157
• /
• 2006

Enterobacter sakazakii, designated as an unique microbial species in 1980, may cause bacteremia, necrotizing enterocolitis and infant meningitis. The distribution and the thermostability of E. sakazakii in unprocessed ready-to-eat (RTE) agricultural products of 252 and in 25 powdered infant formulas (PIF) were analyzed. Eighty one, 50, 43, and 47% of brown rice, pumpkin, potato, and carrot samples, respectively, had aerobic plate counts (ARC) in the range of 5 log CFU/g or more. Almost all the other products sampled had APC of approximately 2 log CFU/g. Fifty three, 75, 67, and 68% of banana, pumpkin, soybean, and carrot had Enterobacteriaceae counts approximating 3 log CFU/g. Sixty six percent of the brown rice tested had Enterobacteriaceae counts approximating 5-6 log CFU/g. E. sakazakii was isolated from 3/25(12%), 4/23(17%), 1/24(4%), and 1/27(4%) of PIF, brown rice, laver, and tomato samples, respectively. D-values were 3.52-4.79 min at 60 and $D_{60}-values$ were similar as the isolates reported. Thermal inactivation of four thermovariant E. sakazakii strains during the rehydration of PIF with hot water were investigated. At $50^{\circ}C$, the levels of E. sakazakii decreased one log CFU/g for 4-6 min and thereafter the levels remained stable for 20 min. At $60^{\circ}C$, inactivation by about 2 log CFU/g occurred for 20 min. Therefore, the unprocessed agricultural products might be a source of contamination for PIF when used as an ingredient after drying and pulverization. Rehydration of PIF for infant feeding with a water temperature of $60^{\circ}C$ rather than $50^{\circ}C$, as recommended by the manufacturers, may be helpful in the reduction of potential E. sakazakii risk.