• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.1003-1006
• /
• 2003

In recent years, FRP plates have been studied for flexural reinforcement of RC structures due to easy installation and good Quality control. This study presents experimental field test results for the effectiveness of flexural reinforcement of the RC slab using external prestressing with thin CFRP strips made by the pultrusion process. It was demonstrated that flexural strength was considerably increased with relatively easy installation when compared to the other methods used for the composite reinforcement.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.199-205
• /
• 2001

This paper describes the design methodology, manufacturing process, rebar tensile and bending properties. Braidtrusion is a direct Composite fabrication technique utilizing an in-line braiding and pultrusion process. The produced Composite rebar exhibits ductile stress-strain behavior similar to that of conventional steel bar. Various rebar diameters ranging from modeling scale(3m) to full-scale prototype of 9.5mm have been produced Glass Fiber Reinforced Plastics(GFRP) rebar were successfully fabricated at $\phi$8.5mm and $\phi$9.5mm nominal diameters of soild and hollow type using a braidtrusion process. Tensile and bending specimens were tested and compared with behavior of stress-strain of GFRP rebar and steel bar.

• 복합신소재구조학회 논문집
• /
• 제5권3호
• /
• pp.17-22
• /
• 2014

Fiber reinforced plastic (FRP) structural shapes are readily available in civil engineering applications. Among many manufacturing techniques used for FRP structural shapes, pultrusion process is one of the most widely used techniques in civil engineering applications. Pultrusion is a manufacturing process for producing continuous lengths of reinforced polymeric plastic structural shapes with constant cross-section. Pultruded composites are attractive for structural applications because of their continuous mass production with excellent mechanical properties. This paper presents the results of investigations pertaining to the bolted connection with two bolts for the pultruded FRP (PFRP) structural members. PFRP bolted connection tests were conducted with end distance to bolt diameter ratio ($e_1/d_b$) and two types of bolt pattern such as horizontal (Pattern A) and vertical arrangement (Pattern B). As a result, it is found that the $e_1/d_b$ is recommended as the ratio of 4. In addition, it is also found that the bearing strengths at failure of the Pattern A and Pattern B have a similar value.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.199-202
• /
• 2000

Compared with existing construction materials, ACM(Advanced Composites Material) possesses many advantage such as light-weight, high-strength, corrosion resistant properties, etc. In this study, utilizing those advantages of ACM, composite skin and comer plate for protection of concrete port structure are developed. Detailed procedure fur analysis, design and fabrication along with site installation for demonstration project are described. It is also demonstrated that pultrusion process for comer plate and VARTM process for composite skin are promising fabrication methods fer future civil infrastructure application.

• Composites Research
• /
• 제14권6호
• /
• pp.16-23
• /
• 2001

인발 와인딩에 의한 섬유강화 복합재료 중공 봉의 기계적 거동해석을 수행하였다. 이 목적의 수행을 위해 새롭게 제작된 와인더를 전통적 인발 시스템에 부탁하여 시편을 제작하였다. 또한 인발-와인딩된 시편을 제작할 수 있는 새로운 공법을 개발하였다. 이 연구를 위해 유한요소 해석 프로그램 POSTII를 확장 개발하였다. 비선형유한요소 수식화에는 2차 피올라-키르히호프 응력 텐서와 그린 변형률 텐서에 기초한 업데이트된 라그란지언 표현법이 사용되었다. 복합재료 중공봉의 유한요소 모델링을 위해 8절점 응축쉘요소를 사용하였다. 파손평가를 위해 모든 유한요소의 각 단층에서의 평균응력을 최대음력 판정법에 대입하였다. 수치해석 예로서 불포화 섬유강화 복합재료 중공 봉의 기계적 거동을 초기 하중상태에서 최종 붕괴가지 조사하였다. 파손에 따른 강성저하와 응력제하를 고려한 유한요소해석 결과는 극만 하중과 파손 및 변형에서 실험치와 잘 일치하였다.

• 복합신소재구조학회 논문집
• /
• 제1권2호
• /
• pp.20-28
• /
• 2010

이 논문에서는 기존의 CFFT(Concrete Filled FRP Tube) 복합재 말뚝의 휨강성을 확보하기 위한 새로운 복합재 말뚝형식을 제안하였다. 기존의 CFFT 복합재 말뚝은 필라멘트와인딩 공정으로 제작한 FRP를 사용하기 때문에, 압축력이 편심재하될 경우 휨거동에 대한 안전성을 확보하기 위해 철근 등 별도의 보강재를 필요로 한다. 이 연구에서는 별도의 보강재 없이 휨거동에 대한 저항성을 확보하기 위하여 펄트루젼 방식으로 제작된 FRP를 CFFT 외부에 원주방향으로 부착시킨 FRP-콘크리트 합성말뚝(Hybrid CFFT, HCFFT)을 제안하였다. 이 논문은 HCFFT의 구조적 거동을 검토하기 위한 연구의 일부로서, HCFFT에 사용되는 필라멘트와인딩 FRP의 역학적 특성을 알기 위한 실험을 실시하였다. 또한, 기존 연구 결과를 참조하여 HCFFT의 압축강도를 추정하였으며, 유한요소해석을 통해 얻은 결과와 비교분석하였다.

• 한국기계가공학회지
• /
• 제21권7호
• /
• pp.98-104
• /
• 2022

Circular sawing and milling are general machining processes used for routing fiber-reinforced plastics (FRP). In this study, the productivity and cutting quality of a circular saw and flat endmill were compared. As a result, the productivity of the circular saw was approximately ten times higher than that of the endmill for the same tool life, and the burr size of the circular saw was 14 times smaller than that of the flat-end mill. The spectrogram analysis of the cutting sound also showed that the acoustic emission of the circular saw was more uniform than that of the flat end mill. Circular sawing is thus a more suitable process for the straight cutting of pultrusion FRP than a flat endmill.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.112-116
• /
• 2003

This paper describes the need for a ductile of Fiber Reinforced Plastic(FRP) reinforcement for concrete structures. The criteria to be met by the FRP, which are based on the properties of the steel rebar it is to replace, are threefold: high initial modulus, a definite yield point and a high level of ultimate strain. It is shown that the use of a fiber architecture based design methodology facilitates the optimization of the performance of FRP through material and geometric hybrid. Ductile hybrid FRP bars were successfully fabricated at 3mm and 5mm nominal diameters using an in-line braiding and pultrusion process.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.85.1-88
• /
• 2000

FRP has been used very much as high strength core materials for insulators because of its high strength and good insulation properties. In this study cantilever, tension and torsion stress were simulation along to the unidirection glass fiber. In addition, FRP was made by pultrusion method. This paper proposed the procedure of the finite element model updating and pretest using the commerical finite element code MSC.Nastran. To ehance the efficiency of experimental modal analysis, we proposed the process which is the selection of the locations and the number of measurement points for pre-test.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.69-71
• /
• 2001

FRP has been used very much as high strength core materials for insulators because of its high strength and good insulation properties. In this study cantilever, tension and torsion stress were simulation along to the unidirection glass fiber. In addition, FRP was made by pultrusion method. This paper proposed the procedure of the finite element model updating and pretest using the commerical finite element code MSC.Nastran. To ehance the efficiency of experimental modal analysis. we proposed the process which is the selection of the locations and the number of measurement points for pre-test.