• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.176-176
• /
• 2000

Generally, discrete-time processing is applied to the uniformly-sampled signals. But, radars emit pulse trains with irregular time instances. In this paper, we formulate the radar pulse train as a stochastic discrete-time dynamic linear model. The estimation task can be done via linear signal processing using Kalman Filter and some considerations. As a result, we can estimate the pulse repetition interval of a pulse train and predict the time instances of the next pulses to be received.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.17 no.1
• /
• pp.10-13
• /
• 1980

The power spectrum of jittered pulse train is derived for the independent stationary pulse sequence with a stationary Gaussian phase jitter. For the unipolar pulse train signal, it is shown that as the phase jitter increases, the continuous Part of the power spectrum increases chile the discrete part decreases.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1995.06a
• /
• pp.246-249
• /
• 1995

4.16kbps의 전송률을 갖는 음성 부호화기 구조에 관하여 기술한다. 제안된 음성 부호화기는 개방 회로 피치 검출기와 이로부터 생성된 pulse train을 코드북으로 갖는 CELP 부호화기이다. Pulse-Train codebook은 분석 프레임별로 부호화 및 복호화 양단에서 생성되며 음성의 피치 및 포만트 정보를 내포하고 있다. 구현된 PT-CELP는 random codebook 방식의 CELP에 비해 적은 크기로 codebook을 만들 수 있으며 음성의 특징을 충분히 반영하므로 합성된 음성의 음질을 향상시킬 수 있다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.4
• /
• pp.38-48
• /
• 2002

Some signals, such as in radar system, are transmitted as periodic pulse trains. If more than one pulse train are transmitted over the same communication channel, a problem is to separate them for source identification and extract each pulse train at the receiver. This is known as pulse train deinterleaving. In this paper, we present an approach for deinterleaving the pulse trains and extracting their periods combining the estimation of the frequency of each pulse train by DFT, CDIF/SDIF histogram and Sequence Search technique. Also, we present the result of deinterleaving pulse trains and extracting PRI in the complex environment which multiple signals are interleaved.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.415-416
• /
• 2008

We demonstrate a simple method to multiply the repetition rate of an optical pulse train by a fiber Fabry-Parot interferometer (FFPI) spectral filtering. A stable 40 GHz pulse train at 1550 nm is successfully generated by removing unwanted spectral components of a 10 GHz actively mode-locked laser source by passing a high finesse FFPI.

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.251-259
• /
• 1996

Two-Photon Fluorescence (TPF) experiment measures temporal width of an amplified short laser pulse which has passed through a four-pass Nd: glass amplifier, after selecting a single pulse from pulse train Q-switched and mode-locked(QSML) in Nd:YLF master oscillator. Determination of pulsewidth and pulseshape was also made with detection of autocorrelation trace of CW mode-locked pulse train by using noncollinear type I Second Harmonic Generation (SHG) method. The observed TPF track showed various patterns, depending on pulse-selecting position in QSML pulse train. That is, autocorrelation of a pulse extracted at front of the train displayed smooth pulse shape, while one from the trailing part of the train created many sharp spikes and substructure in the pulse. By TPF method, pulsewidth was measured to be 44.4 ps with contrast ratio of 2.86 which enabled us to find out energy fraction of a pulse to total energy, (sum of pulse and background); we obtain the value of 0.62. Pulsewidth of 46.6ps was also acquired in another SHG experiment with the help of only mode-locked pulse train. On the other hand, we confirmed that shape of the pulse is close to $sech^2$ one as a result of fitting the SHG autocorrelation signal with various functions. With simulation using this $sech^2$ type of pulse, pulsewidth reduction of the beam, having passed through four-pass amplifier, was also verified.

• ETRI Journal
• /
• v.33 no.5
• /
• pp.679-688
• /
• 2011

A new discrete-amplitude pulse width modulation (DAPWM) scheme for a high-efficiency linear power amplifier is proposed. A radio frequency (RF) input signal is divided into an envelope and a phase modulated carrier. The low-frequency envelope is modulated so that it can be represented by a pulse whose area is proportional to its amplitude. The modulated pulse has at least two different pulse amplitude levels in order that the duty ratios of the pulse are kept large for small input. Then, an RF pulse train is generated by mixing the modulated envelope with the phase modulated carrier. The RF pulse train is amplified by a switching-mode power amplifier, and the original RF input signal is restored by a band pass filter. Because duty ratios of the RF pulse train are kept large in spite of a small input envelope, the DAPWM technique can reduce loss from harmonic components. Furthermore, it reduces filtering efforts required to suppress harmonic components. Simulations show that the overall efficiency of the pulsed power amplifier with DAPWM is about 60.3% for a mobile WiMax signal. This is approximately a 73% increase compared to a pulsed power amplifier with PWM.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1536-1541
• /
• 2009

In this paper, we present a novel pulse train identification method for two step stagger pulse train. Generally radar uses a fixed pulse train, and it is easy for electronic warfare system to measure the pulse repeat interval(PRI) and identify the radar. But it is very difficult to measure the PRI of stagger pulse radar because the pulse interval is periodically changed. We suggest a novel method to measure the PRI and identify the radars using the second deviation of pulse train. This method is faster comparing with Histogram method. We have a good PRI measurement results for 2 step stagger signals.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1996-1999
• /
• 2002

Applying a higher frequency periodic control signal, a state of a chaotic pulse-train generator is quantized. The circuit has various co-existing super-stable periodic pulse-trains (ab. SSPTs) and generates one of them depending on the initial state. Also correlation characteristics of the SSPTs are analyzed precisely. We then consider application of the SSPTs to spread sequences of CDMA with pulse-train signals.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.2
• /
• pp.60-65
• /
• 1985

A method of weighting of a staggered pulse train is presented and an improvement per-formance of the signal-to-noise ratio for each case is compared. As the result of a computer simulation, the signal-to-noise ratio for weighting of a stagger-ed pulse train is a great improvement on the case of an uniform pulse train. The signal-to-noise ratio of optimum weighting is more improved than that of binomial weighting, it is known that the signal-to-noise ratio is improved as the increasing of the number of delay line cancellers, and it is shown that the signal-to-noise ratio is improved by weighting of the MTI output pulses before the integration process.