• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.394-397
• /
• 2003

In this paper, we have proposed a clock recovery algorithm of OFDM/QPSK-DMR(Orthogonal Frequency Division Multiplexing/Quadrature Phase Shift Keying Modulation-Digital Microwave Radio)system using BL-PSF(Band Limited-Pulse Shaping Filter) and have analyzed the clock phase error variance performance of OFDM/QPSK and single carrier DMR systems. The existing OFDM/QPSK-DMR system using the windowing requires training sequence or CP(Cyclic Prefix) to synchronize a receiver clock frequency Because there is no training sequence or CP(Cyclic prefix) in our proposed DMR system, the proposed clock recovery algorithm is useful to the OFDM/QPSK-DMR system using BL-PSF, The simulation results confirm that the proposed clock recovery algorithm has the same clock phase error variance performance in a single carrier DMR system under AWGN(Additive White Gaussian Noise) environment.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.250-253
• /
• 2003

In this paper, a characteristics and points of Guassian pulse using UWB system is analyzed, the TDMG pulse is proposed that originated ultra wide band signal without pulse width reduction. It is showed that TDMG pulse character compare with Gaussian pulse through computer simulation. And it is verified that decreased a interference of other communication systems

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2086-2088
• /
• 2000

Key elements of in the development Electro-Thermal-Chemical propulsion (ETC) are high current pulse shaping, switching and storage bank device with high energy density 300kJ pulse power capacitor bank module for ETC application is designed and fabricated. The tested result are described.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.263-266
• /
• 2002

Many methods have been Proposed to reduce the PAPR of the OFDM signal. Among them a method that uses the time waveform of the different sub-carriers. The method is referred to as pulse shaping and it works with arbitrary number of sub-carriers and my type of base-band linear modulation. It has been shown, using this technique, that it is possible to design a set of time waveforms that reduce the PAPR of the OFDM transmitted signal and improve its power spectrum simultaneously. In this paper, we investigate the effect of some of these sets of time waveforms on the OFDM system performance in terms of Bit Error Rate (BER).

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권8호
• /
• pp.1270-1278
• /
• 2004

This paper describes the effectiveness of laser pulse shaping in eliminating weld defects such as porosity, cracks and undercuts in pulsed Nd:YAG laser welding. A large porosity was formed in a keyhole mode of deeply penetrated weld metal of any stainless steel. Solidification cracks were present in STS 310S with above 0.017%P and undercuts were formed in STS 303 with about 0.3%S. The conditions for the formation of porosity were determined in further detail in STS 316. With the objectives of obtaining a fundamental knowledge of formation and prevention of weld defects, the fusion and solidification behavior of a molten puddle was observed during laser spot welding of STS 310S through a high speed video photographing technique. It was deduced that cellular dendrite tips grew rapidly from the bottom to the surface, and consequently residual liquid remained at the grain boundaries in wide regions and enhanced the solidification cracking susceptibility. Several laser pulse shapes were investigated and optimum pulse shapes were proposed for the reduction and prevention of porosity and solidification cracking.

• 한국전자파학회논문지
• /
• 제23권7호
• /
• pp.784-790
• /
• 2012

본 논문에서는 UWB의 6~10 GHz 주파수 대역을 위한 디지털 방식의 CMOS UWB 펄스 발생기를 제안하였다. 제안된 펄스 발생기는 매우 적은 전력 소모와 간단한 구조로 설계 및 구현되었다. 이 펄스 발생기는 가변되는 shunt capacitor 방식으로 구성된 CMOS delay line을 사용하여 중심 주파수를 제어할 수 있게 하였고, Gaussian Pulse Shaping 회로를 이용하여 FCC 등에서 제시하는 UWB 스펙트럼 규정을 만족할 수 있도록 설계하였다. 측정결과, 가변 가능한 중심 주파수는 4.5~7.5 GHz까지 자유롭게 조절이 가능하였고, 펄스의 폭은 대략 1.5 ns였다. 그리고 10 MHz의 PRF 조건에서 310 mV pp의 크기의 펄스 신호를 보여주었다. 회로는 0.13 um CMOS 공정으로 제작되었고, 코어의 크기는 $182{\times}65um^2$로 매우 작은 크기로 설계되었으며, 평균 소모 전력은 1.5 V 전원을 사용하는 출력 buffer에서 11.4 mW를 소모하고, 이를 제외한 코어에서는 0.26 mW의 매우 작은 전력을 소모하고 있다.

• 대한전자공학회논문지TC
• /
• 제42권12호
• /
• pp.111-116
• /
• 2005

본 논문에서는 밀리미터파 대역에서의 Giga-bit 모뎀을 위한 BASK 시스템을 제안한다. 제안한 시스템의 송신단은 입력신호의 pulse shaping을 위해 고속의 shutter를 사용하며, ISI(Inter-Symbol Interference)를 최소화 할 수 있고, 수신단은 SNR 개선과 rectangular pulse train을 만들기 위해 repeater를 사용한다. Repeter는 몇 개의 converter로 이루어져 있으며, converter는 low pass filter와 limiter로 구성된다. 또한, 수신된 신호에서 발생하는 랜덤 오류를 정정하기 위해 viterbi 알고리즘을 사용하여 BER을 개선 시켰다. 제안한 시스템은 Direct Conversion 방식으로 IF처리과정이 없으므로 시스템이 매우 간단하다.

• Journal of the Korean Physical Society
• /
• 제73권11호
• /
• pp.1637-1643
• /
• 2018

To reduce the laser pulse shape distortion accompanying the amplification process and achieve an intended output pulse shape in the Nd:YAG amplifier chain, we propose a frequency-modulated pulse-amplification method. Assuming carrier-frequency-modulated seed pulses, we numerically simulate the pulse amplification in an Nd:YAG amplifier chain where severe distortion occurs. For the calculation, we develop a modified Frantz-Nodvik equation, which enables two inputs with different carrier frequencies. The simulation results indicate that the temporal contrast of the seed pulse needed to obtain a flat output pulse shape is reduced by 16 - 25 dB when frequency modulation is applied.

• 전기의세계
• /
• 제29권5호
• /
• pp.321-328
• /
• 1980

The Q-switching oscillator of TE $M_{00}$ mode was constructed in order to improve the properties of energy focusing and amplification, and prevent laser materials from breakdown. The Q-switching was done by means of electro-optical effect using Glan prism and KDP Pockels cell. Sharp laser pulse of risetime-1 ns and variable pulse width 2-10 ns was obtained from Q-switching laser pulse by PTM method using a laser triggered spark gap (LTSG), Glan prism and Pockels cell. A single ultra-short pulse (picosec order in pulse width) was obtained from mode-locked pulse train in combination of a mode-locked oscillator using saturable dye cell with pulse shaping system using PTM method.d.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권4호
• /
• pp.415-424
• /
• 2016

This paper describes a high data rate proximity transmitter design for high resolution smartphone-mirrored display applications. A 2 Gb/s transmitter is designed with a low transmission power of -70 dBm/MHz and a wide bandwidth of nearly 3 GHz. A digital pre-correction method is employed in the transmitter to mitigate the inter-symbol interference problem. A carrier-based digital pulse shaping and a reconfigurable digital envelope generation methods are employed for robust operation by utilizing 20 phases from a 2 GHz phase-locked loop. A 6.5-9.5 GHz transmitter implemented in 65 nm CMOS achieves the maximum data rate of 2 Gb/s, consuming only 7.6 mW from a 1 V supply.