• 제목/요약/키워드: Pulse plant

검색결과 116건 처리시간 0.031초

LMPC를 이용한 태양광발전소 인버터의 추종 제어 (Tracking Control of Solar Power Plant Inverter using Model Predictive Control of Laguerre Functions)

  • 조욱래;차왕철;박정호;김재철
    • 조명전기설비학회논문지
    • /
    • 제28권11호
    • /
    • pp.106-111
    • /
    • 2014
  • Currently, the commonly used method for PWM(Pulse Width Modulation) Inverter of the Solar Power Plant. However, the limit of the developing performance to the non-linear and switch devices of the Inverter. Therefore, we propose a model predictive control techniques applied to Laguerre functions. LMPC(Laguerre functions model predictive control) reduces the number of computations made and so online implementation becomes possible where traditional MPC would have fail. In this paper, we comment on the appropriate scope and functions degree of the LMPC inverter control. The simulation results from MATLAB are also provided.

Silver nitrate and silver-thiosulphate mitigates callus and leaf abscission during Shisham clonal micro-propagation

  • Raturi, Manoj Kumar;Thakur, Ajay
    • Journal of Plant Biotechnology
    • /
    • 제48권3호
    • /
    • pp.173-178
    • /
    • 2021
  • Basal callus formation and leaf abscission is a problem in clonal micropropagation. We have described an in vitro clonal propagation protocol of Dalbergia sissoo Roxb (shisham) 'FRI-14' in which AgNO3 played important role not only in mitigating problem of leaf abscission and basal callus, but also improved shoot induction and multiplication. Best induction and shoot multiplication was obtained on MS media with 1.5 mg/l 6-BAP and 10 mg/l AgNO3 and half-strength MS media with 0.5 mg/l 6-BAP, 2 mg/l AgNO3 and 50 mg/l Adenine sulphate whereas best ex vitro rooting was obtained with 200 mg/l IBA in pulse treatment.

Non-thermal Plasma Process for simultaneous removal of SO2/NOx from a Sintering Plant of Steel Works

  • 남창모;목영선;권기홍;서유덕;조병락
    • 한국산업융합학회 논문집
    • /
    • 제6권1호
    • /
    • pp.81-86
    • /
    • 2003
  • For the simultaneous removal of $SO_2$/NOx from an iron-ore sintering plant, industrial plasma experiments have been conducted with a flue gas flow rate of $5,000Nm^3/hr$. The maximum 40kW power using the magnetic pulse compression (MPC) system generates a peak value of 100-150kV pulse voltage with its risetime of 200nsec and full width at half maximum (FWHM) of 500nsec, and with a frequency <300Hz. The plasma reactor module adopts a wire-plate structure with a gap of 200-400mm ID between plates. Initial concentrations of $SO_2$ and NOx were around 100-150ppm, respectively in the presence of 15% $O_2$ and <10% $H_2O$. Various reaction parameters such as specific energy ($Whr/Nm^3$), $NH_3$ injection with corona discharge, flow rate and injection of hydrocarbons were investigated for $SO_2$/NOx removal characteristics. About 90/65% of $SO_2$/NOx were simultaneously removed with a specific energy of $3.0Whr/Nm^3$ when both $NH_3$ and hydrocarbons were injected. Practical implications that the pilot-scale plasma results provide are further discussed.

  • PDF

자기 학습 구조를 가진 퍼지 제어기의 응용 (Application of a Fuzzy Controller with a Self-Learning Structure)

  • 서영노;장진현
    • 한국통신학회논문지
    • /
    • 제19권6호
    • /
    • pp.1182-1189
    • /
    • 1994
  • 본 논문에서는 성능 평가에 의한 자기 학습 구조를 가진 퍼지 제어기를 연구하였다. 퍼지 제어기는 퍼지 논리에 기초를 두고 있고, 퍼지 논리는 실세계의 근사적이고 불확실한 현상을 기술하는데 효과적이다. 이러한 퍼지 논리의 추론으로 제어를 수행하지만 퍼지 제어기의 중요한 부분인 맴버쉽 함수와 제어 규칙을 설정하는 것은 쉬운일이 아니다. 이런 문제점을 보완하기 위해 제어 목표값에 도달한 때까지 스스로 제어규칙을 개선하는 자기 학습 제어기를 설계하였다. 본 논문에서 퍼지 제어기의 학습은 평가 기준표(Performance Index)을 이용하여 이루어진다. 퍼지 제어기의 구현은 386PC을 기본으로 하며, D/A변환기, PWM(Pulse Width Modulation) 모터 드라이브 회로 등이 포함된 인터페이스 카드를 제작하여 제어 대상체의 데이터를 처리하였다. 공과 막대기 시스템(Ball and Beam system)을 제어 플렌트로 구현하여 얻은 실험 데이터와 이에 대한 컴퓨터 시뮬레이션을 통하여 얻은 데이터를 서로 비교하여서 자기 학습 구조를 갖는 퍼지 제어기의 유용성을 평가하였다. 실험의 결과는 학습 구조가 없는 퍼지 제어기보다 학습 구조를 가진 제어기가 정상상태 도달시간(Settling Time)에서 약 10%정도 빠르게 개선되었다.

  • PDF

한국산 두류 종실중 토코페롤 함량 및 지방산 조성 (Tocopherols and fatty acids in plant seeds from Korea)

  • 이인복;최강주;유광근;장기운
    • Applied Biological Chemistry
    • /
    • 제35권1호
    • /
    • pp.1-5
    • /
    • 1992
  • 한국에서 다양한 용도의 식품원료로 사용되고 있는 13개 두류의 종실에 대한 토코페롤과 지방산조성을 HPLC와 GC로 각각 분석하였다. 총 토코페롤 함량은 $4.74{\sim}44.05\;mg/100g$으로 두류에 따라 함량차이가 현저하였으며, 동족체별 토코페롤 함량은 ${\gamma}->{\delta}->{\alpha}-$토코페롤 순이었으나, 적소두 및 갈소두에서는 ${\delta}->{\gamma}->{\alpha}-$토코페롤 순이었다. 지방질 함량도 $0.53{\sim}20.96%$로 함량차가 현저하였으며, 특히 지방질 함량이 $15.78{\sim}20.96%$인 두류는 불포화지방산의 조성비가 $86.5{\sim}88.2%$로 높았고 그 중 linoleic acid가 $56.0{\sim}56.8%$로 현저하게 높았으며, 총 토코페롤 함량도 $23.2{\sim}44.05\;mg/100g$으로 높은 경향이었다. 또한 불포화지방산과 ${\gamma}$-토코페롤간에는 정의 상관관계가 인정되었다.

  • PDF

여과집진기의 탈진 거동 개선에 관한 연구 (A study on the improvement of cleaning performance in bag-filter)

  • 홍성길;금영호;손병현
    • 한국산학기술학회논문지
    • /
    • 제16권2호
    • /
    • pp.1571-1578
    • /
    • 2015
  • 전산유체역학(CFD)을 이용하여 산업체에 널리 적용되고 있는 충격기류형 탈진시스템의 탈진 특성을 규명하고, 그 성능을 향상시키기 위해 탈진부 유니트(unit) 형상을 개조한 경우의 탈진 성능을 비교하였다. 탈진부 각 형상에 대해 검토한 결과, 블로우 튜브에 노즐을 설치한 경우(Case 3)와 벤츄리에 이중 유입관을 설치한 경우(Case4, 5)가 현재 현장에서 널리 적용되고 있는 구조(Case 1)에 비해 우수한 것으로 예측되었다. 또한 최적 형상의 벤츄리를 설계하고, 이 벤츄리를 pilot plant에서 실험하여 현장 적용성을 분석하였다. 블로우 튜브와 본 연구에서 제안한 벤츄리를 조합한 시스템의 경우, 기존 시스템(블로 튜브만 사용한 경우와 블로 튜브와 벤츄리를 조합한 경우)에 비해 탈진 기류를 집중시키는데 매우 효과적인 것으로 나타났다. 또한 본 연구에서 제안한 벤츄리를 장착하여 테스트한 결과, 산업 현장에서 사용 중인 상용 벤츄리를 사용한 경우 보다 탈진횟수 및 탈진시간이 많이 향상되는 결과를 보였다.

Production of bialaphos-resistant Nierembergia repens by electroporation

  • Shizukawa, Yoshiaki;Mii, Masahiro
    • Plant Biotechnology Reports
    • /
    • 제2권3호
    • /
    • pp.219-226
    • /
    • 2008
  • Transgenic plants with the herbicide-resistance gene (bar gene) were obtained via organogenesis from isolated mesophyll protoplasts of Nierembergia repens after applying electroporation. Transient ${\beta}-glucuronidase$ (GUS) activity of electroporated protoplasts assayed 2 days after applying an electric pulse showed that optimum condition (transient GUS activity 319 pmol 4 MU/mg per min and plating efficiency 2.43%) for electroporation was 0.5 kV/cm in field strength and $100{\mu}F$ in capacitance. The protoplasts electroporated with the bar gene at this condition initiated formation of microcolonies on medium after 2 weeks. After 4 weeks of culture, equal volume of fresh 1/2-strength Murashige and Skoog (MS) medium containing 0.2 mg/l bialaphos was added for selection of transformed colonies. After 6 weeks of culture, growing colonies were transferred onto regeneration medium containing 1.0 mg/l bialaphos, on which they formed adventitious shoots 1-2 months after electroporation. The adventitious shoots rooted easily after transfer onto MS medium with bialaphos lacking plant-growth regulators. Transformation of these regenerants with the bar gene was confirmed by Southern analysis. Some of the transformants showed strong resistance to the application of bialaphos solution at 10.0 mg/l.

Optimal Harmonic Stepped Waveform Technique for Solar Fed Cascaded Multilevel Inverter

  • Alexander, S.Albert;Thathan, Manigandan
    • Journal of Electrical Engineering and Technology
    • /
    • 제10권1호
    • /
    • pp.261-270
    • /
    • 2015
  • In this paper, the Optimal Harmonic Stepped Waveform (OHSW) method is proposed in order to eliminate the selective harmonic orders available at the output of cascaded multilevel inverter (CMLI) fed by solar photovoltaic (SPV). This technique is used to solve the harmonic elimination equations based on stepped waveform analysis in order to obtain the optimal switching angles which in turn reduce the Total Harmonic Distortion (THD). The OHSW method considers the output voltage waveform as four equal symmetries in each half cycle. In the proposed method, a solar fed fifteen level cascaded multilevel is considered where the magnitude of six numbers of harmonic orders is reduced. A programmable pulse generator is developed to carry the switching angles directly to the semiconductor switches obtained as a result of OHSW analysis. Simulations are carried out in MATLAB/Simulink in which a separate model is developed for solar photovoltaic which serves as the input for cascaded multilevel inverter. A 3kWp solar plant with multilevel inverter system is implemented in hardware to show the effectiveness of the proposed system. Based on the observation the OHSW method provides the reduced THD thereby improving power quality in renewable energy applications.

Occurrence mechanism of recent large earthquake ground motions at nuclear power plant sites in Japan under soil-structure interaction

  • Kamagata, Shuichi;Takeqaki, Izuru
    • Earthquakes and Structures
    • /
    • 제4권5호
    • /
    • pp.557-585
    • /
    • 2013
  • The recent huge earthquake ground motion records in Japan result in the reconsideration of seismic design forces for nuclear power stations from the view point of seismological research. In addition, the seismic design force should be defined also from the view point of structural engineering. In this paper it is shown that one of the occurrence mechanisms of such large acceleration in recent seismic records (recorded in or near massive structures and not free-field ground motions) is due to the interaction between a massive building and its surrounding soil which induces amplification of local mode in the surface soil. Furthermore on-site investigation after earthquakes in the nuclear power stations reveals some damages of soil around the building (cracks, settlement and sand boiling). The influence of plastic behavior of soil is investigated in the context of interaction between the structure and the surrounding soil. Moreover the amplification property of the surface soil is investigated from the seismic records of the Suruga-gulf earthquake in 2009 and the 2011 off the Pacific coast of Tohoku earthquake in 2011. Two methods are introduced for the analysis of the non-stationary process of ground motions. It is shown that the non-stationary Fourier spectra can detect the temporal change of frequency contents of ground motions and the displacement profile integrated from its acceleration profile is useful to evaluate the seismic behavior of the building and the surrounding soil.

Survey of ERETIC2 NMR for quantification

  • Hong, Ran Seon;Hwang, Kyung Hwa;Kim, Suncheun;Cho, Hwang Eui;Lee, Hun Joo;Hong, Jin Tae;Moon, Dong Cheul
    • 한국자기공명학회논문지
    • /
    • 제17권2호
    • /
    • pp.98-104
    • /
    • 2013
  • The ERETIC (Electronic REference To access In vivo Concentrations)2 method is a new qNMR experimental technique to measure analytes based on the signal of the reference compound without additional hardware equipment. In this study, ERETIC2 method was validated, and we sought to identify whether it would be possible to apply this method to a specific compound analysis of metabolites in plant. The $90^{\circ}$ pulse value (P1) and spin-lattice relaxation time ($T_1$) of each compound were measured for ERETIC2. The $9^1H$ of 3-(trimethylsilyl) propionic-2,2,3,3-$d_4$ acid (TSP) was used as a reference peak for ERETIC 2, and then, a suitable solvent and pulse sequence for each compound were selected. Under the NOESY-presat sequence, the relative accuracy error for quantitative analyses of primary metabolites was within the range of 5%, with the exception of glucose, which showed ${\geq}$ 55% error due to saturation. It showed excellent results for the quantification of glucose by using a $30^{\circ}$ pulse sequence, which did not suppress the water peak. In addition, the quantitative accuracy for secondary metabolites was extremely accurate, with an error ${\leq}$5% when considering the purity of the standard sample. The ERETIC2 method showed outstanding linearity, precision, and accuracy.