• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1997년도 제15회 KOSCO SYMPOSIUM 논문집
• /
• pp.69-76
• /
• 1997

Industrial-scale pulse corona process to remove $SO_2$ and $NO_x$ simultaneously from combustion flue gas has been studied. The pilot plant built in the present study treats 2,000 $Nm^3$/hr of flue gas from a boiler. The geometry of the pulse corona reactor is similar to that of an electrostatic precipitator commonly used in industry, A thyratron switch and magnetic pulse compressors, which can generate up to 130 kV of peak pulse voltage and up to 30 kW of average pulse power, have been used to produce pulsed corona. The removal efficiencies of $S0_2$ and $NO_x$ with the present process are maximum of 95 % and 85 %, respectively. Electrical power consumption to produce the pulsed corona, which has been one of the major difficulties to apply this process to industry, has been evaluated in the present study. The results showed that the power consumption can be reduced significantly by simultaneous addition of hydrocarbon injection and heterogeneous phase reactions to the process.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.146-150
• /
• 2001

전기집진기는 여타의 집진 설비에 대한 집진 효율과 유지 보수성이 우수한 설비이며 소결공장의 배출분진과 같은 고온($120{\~}160^{\circ}C$)의 미세분자($5{\~}12{\mu}m$) 및 고비저항($10^{12}{\~}10^{13} {\Omega}cm$)을 포집할 때 DC 하전에 비해 Pulse 하전이 효과적이며 Energy 절감이($60{\~}90\%$) 된다. 본 논문은 소결공장의 DC 하전에서 Pulse 하전으로 전환 시 EP 특성 및 부하변화에 따른 제어방안을 제시한다. 현재 제철소의 소결 전기집진기 경우 정수 직후에는 전압이 정상적으로 공급하다가 시간이 지남에 따라서 DC 전압이 낮아지고 Back Corona 현상이 발생하여 서서히 분진농도는 급격히 상승하는 문제점을 가지고 있다. 이에 비해 Pulse 하전으로 운전할 경우에는 Back Corona 현상 발생억제로 출구농도 상승 기울기를 조장방법 및 Ramping 장치와 관련장치 등을 최적으로 운용할 수 있는 방법을 소결공장 실험하였다.

• 한국추진공학회지
• /
• 제19권2호
• /
• pp.1-8
• /
• 2015

이중펄스 로켓 추진기관은 하나의 펄스분리장치에 의해 분리된 2개의 추진제 그레인을 가진 변형된 고체 추진기관이다. 이러한 추진기관의 주요 성능은 펄스분리장치 홀 면적대 노즐 목 면적비의 변화에 영향을 받는다. 본 연구에서는 펄스분리장치 홀 면적대 노즐 목 면적비 변화에 따른 내부유동특성을 고찰하기 위해 유동해석을 수행하였다. 유동해석에 사용된 기체로는 hot gas로 HTPB/AP계 복합추진제 연소가스와 cold gas로 질소가스롤 사용하였다. 이중펄스 로켓 추진기관의 내부유동해석 결과는 공압실험 결과와 비교 분석을 통해 검증하였다. 본 논문에서는 상용 CFD(Computational Fluid Dynamics) 코드인 ANSYS FLUENT V14.5를 이용하여 유동을 모사하였다.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.56-63
• /
• 2024

In high radiation fields, gamma cameras suffer from pulse pile-up, resulting in poor energy resolution, count losses, and image distortion. To overcome this problem, various methods have been introduced to reduce the size of the aperture or pixel, reject the pile-up events, and correct the pile-up events, but these technologies have limitations in terms of mechanical design and real-time processing. The purpose of this study is to develop a real-time gamma camera to evaluate the radioactive contamination in high radiation fields. The gamma camera is composed of a pinhole collimator, NaI(Tl) scintillator, position sensitive photomultiplier (PSPMT), signal processing board, and data acquisition (DAQ). The pulse pile-up is corrected in real-time with a field programmable gate array (FPGA) using the start time correction (STC) method. The STC method corrects the amplitude of the pile-up event by correcting the time at the start point of the pile-up event. The performance of the gamma camera was evaluated using a high dose rate ¹³⁷Cs source. For pulse pile-up ratios (PPRs) of 0.45 and 0.30, the energy resolution improved by 61.5 and 20.3%, respectively. In addition, the image artifacts in the ¹³⁷Cs radioisotope image due to pile-up were reduced.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1333-1335
• /
• 2000

In order to turn on the SCR gate, trigger signal source have to provide appropriate gate current and voltage under the gate rating based on the characteristic of SCR, the nature of load and power. It will be essential design factors such as trigger source impedance, trigger signal occurring, signal time width and turn off conditions. Also minimum gate trigger current is changed with the deterioration of SCR. SCR, which is needed large gate trigger current absolutely, is very important for SCR characteristic test because it causes unstable output in the misfile or makes a trouble to pulse trigger circuits. This paper shows scheme to test the performance of SCR with the precision analyzing mechanism and the changing trend of minimum gate current under the trigger conditions.

• Journal of Plant Biotechnology
• /
• 제44권1호
• /
• pp.42-48
• /
• 2017

본 연구는 윤판나물의 효과적인 기내 증식을 위한 배양 최적 조건을 구명하기 위해 수행되었다. 신초 유도 및 생장에 영향하는 배지(MS, B5 및 WPM) 및 절편체 종류에 따른 실험에서 줄기 유도는 액아 절편을 식물생장조절물질 무첨가 MS 배지에 배양 시 절편 당 2.5개로 가장 좋았고, 줄기 신장은 정아 절편을 식물생장조절물질 무첨가 MS 배지 배양 시 7.2 cm로 가장 효과적이었다. BA 침지 처리 시 신초 유도 효과는 액아배양 유래 신초를 BA 침지 무처리구에서 신초 유도(2.29개/절편) 및 신초 신장(7.28 cm)이 가장 효과적이었으며, BA 침지 시간이 길어짐에 따라 신초 유도 및 길이 생장은 감소하였다. 발근에 영향하는 IBA 농도 효과는 정아유래 신초를 1.0 mg/L 처리구에서 배양 시 최대 발근율(100%) 및 뿌리 유도수(21.3개/절편)를 보였으며, 정아 혹은 액아 유래 신초지 종류에 따른 발근율의 차이는 크지 않은 것으로 관찰되었다. 발근된 식물체는 상토로 이식하여 형태적인 변이 없이 정상적인 생장을 보였다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2002년도 춘계학술대회 및 임시총회
• /
• pp.10-13
• /
• 2002

본 연구에서는 다기능 휠체어 시스템을 개발하기 위해 제어부를 16bit의 마이크로 프로세서인 80C196KC 사용하였고, 조이스틱을 통해서 된 시스템을 제어하는 것을 구현하였다. 전체시스템은 제작된 전동 휠체어 기본 Plant를 사용하였으며, 모터에서 Encoder로 입력받아 MCU를 통해서 휠체어 회전수를 이용하여 제어시켰다. 휠체어 모터의 제어 방법은 PWM(Pulse Width Mudulation)을 이용하였으면, 여기에 H-브릿지 회로를 구성하였다. 조이스틱을 사람의 손으로 제어하는데 있어서 조이스틱 위치 변화에 따른 전동휠체어에 부착된 DC모터 동작을 퍼지 제어 알고리즘을 사랑하였으며, DC모터의 속력과 방향을 제어하고 아울러 위치 정보까지도 제어할 누 있게끔 하였다.

• 한국재료학회지
• /
• 제18권3호
• /
• pp.117-122
• /
• 2008

Micro-sized bumps on a multi-layered build-up PCB were fabricated by pulse-reverse copper electroplating. The values of the current density and brightener content for the electroplating were optimized for suitable performance with maximum efficiency. The micro-bumps thus electroplated were characterized using a range of analytical tools that included an optical microscope, a scanning electron microscope, an atomic force microscope and a hydraulic bulge tester. The optical microscope and scanning electron microscope analyses results showed that the uniformity of the electroplating was viable in the current density range of $2-4\;A/dm^2$; however, the uniformity was slightly degraded as the current density increased. To study the effect of the brightener concentration, the concentration was varied from zero to 1.2 ml/L. The optimum concentration for micro-bump electroplating was found to be 0.6 ml/L based on an examination of the electroplating properties, including the roughness, yield strength and grain size.

• Journal of Microbiology and Biotechnology
• /
• 제16권10호
• /
• pp.1650-1655
• /
• 2006

Bacteria belonging to the genus Paenibacillus are facultatively anaerobic endospore formers and are attracting growing ecological and agricultural interest, yet their genome information is very limited. The present study surveyed the genomic features of P. polymyxa ATCC $842^T$ using pulse-field gel electrophoresis of restriction fragments and sample genome sequencing of 1,747 reads (approximately 17.5% coverage of the genome). Putative functions were assigned to more than 60% of the sequences. Functional classification of the sequences showed a similar pattern to that of B. subtilis. Sequence analysis suggests nitrogen fixation and antibiotic production by P. polymyxa ATCC $842^T$, which may explain its plant growth-promoting effects.

• 상하수도학회지
• /
• 제23권1호
• /
• pp.69-75
• /
• 2009

The characteristics of disinfection and organic removal were investigated with pulse UV lamp in this study. The intensity and emission wavelength of pulse UV Lamp were compared with low pressure UV lamp. The emission spectrum range of pulse UV lamp was between 200 and 400 nm while the emission spectrum of low pressure UV lamp was only single wavelength of 254nm. 3 Log inactivation rate of B. subtilis spore by pulse UV and low pressure UV irradiation was determined as $44.71mJ/cm^2$ and $57.7mJ/cm^2$, respectively. This results implied that wide range of emission spectrum is more effective compared to single wavelength emission at 254nm. 500ng/L of initial 2-MIB concentration was investigated on the removal efficiency by UV only and $UV/H_2O_2$ process. The removal efficiency of UV only process achieved approximately 80% at $8,600mJ/cm^2$ dose. 2-MIB removal rate of $UV/H_2O_2$ (5 mg/L $H_2O_2$) process was 25 times increased compared to UV only process. DOC removal efficiency for the water treatment plant effluent was examined. The removal efficiency of DOC by UV and $UV/H_2O_2$ was no more than 20%. Removal efficiency of THMFP(Trihalomethane Formation Potential), one of the chlorination disinfection by-products, is determined on the UV irradiation and $UV/H_2O_2$ process. Maximum removal efficiency of THMFP was approximately 23%. This result indicates that more stable chemical structures of NOM(Natural Organic Matter) than low molecule compounds such as 2-MIB, hydrogen peroxide and other pollutants affect low removal efficiency for UV photolysis. Consequently, pulse UV lamp is more efficient compared to low pressure lamp in terms of disinfection due to it's broad wavelength emission of UV. Additional effect of pulse UV is to take place the reactions of both direct photolysis to remove micro organics and disinfection simultaneously. It is also expected that hydrogen peroxide enable to enhance the oxidation efficiency on the pulse UV irradiation due to formation of OH radical.