• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2349-2351
• /
• 2003

This paper reports a novel microfluidic system, by which microfluidic delivery, transport and control can be digitally realized in femtoliter scale. Microelectronic grade $N_2$ from a pressurized canister was passed through HPLC tubing into a micro injector. The micro injector was driven and controlled digitally by the control system that can apply various control parameters such as pulse frequencies. A front-end of micro nozzle was inserted the dyed oil to collect droplets injected. The diameter of a droplet was measured by a microscope and a CCD camera, and then its volume can be calculated on the assumption that the droplet is spherical. The micro nozzles were simply pulled in glass capillary tubes by the micro puller self-made, and the geometry parameters of the micro nozzles can be adjusted easily. Experiments have successfully been carried out, and the results demonstrated that the proposed digital micro injector possesses three significant advantages : precise ultra-small liquid volume in femtoliter scale, digital microfluidic control and micro devices fabricated by simple glass process, not based on IC process.

• KCI Concrete Journal
• /
• 제14권3호
• /
• pp.102-110
• /
• 2002

Results of an experimental study on the pullout behavior of the headed reinforcement are presented. A total of 48 pullout tests was performed to evaluate pullout strengths and load-displacement behaviors in pullout of the headed bars. The square steel heads had gross area of 4 $A_{b}$ and thickness of $d_{b}$ The test program consisted of three pullout test groups: Simple and Edge pullout tests using plain concrete slabs, comparison of pullout performances between the standard hooks and the headed reinforcement, and pullout tests of headed reinforcement using reinforced concrete columns. Test variables included concrete strengths ( $f_{c}$' = 27.1MPa, 39.1MPa), reinforcing bar diameters (D16~D29), embedment depths (6 $d_{b}$~12 $d_{b}$), edge conditions, column reinforcement, and single-vs.-multiple bar pullout. Test results revealed that the heads effectively provided the pullout resistances of the deformed bars in tension. The load-displacement behaviors were similar between the 90-degree hooks and the headed reinforcement. When a multiple number of headed bars installed with small head-to-head spacings was pulled out, reinforcement designed to run across the concrete failure surface in a direction parallel to the headed bars helped improve the pullout performances of the headed reinforcement.t.ement.t.

• 한국지반공학회논문집
• /
• 제15권1호
• /
• pp.63-78
• /
• 1999

압축형 앵커의 설계를 위해서는 세가지의 조건이 고려되어져야 한다. 그 첫째가 주면마찰저항력이고, 둘째가 강선의 인장강도이고, 셋째가 그라우트의 압축강도이다. 특히, 세가지 조건 중에서도 그라우트의 압축강도는 압축형 앵커의 인발력 산정에 있어서 가장 중요한 매개변수가 된다. 압축형 앵커가 지중에서 인발될 때, 그라우트의 압축강도는 지반 구속압에 의해 증가하게 된다. 이 지반 구속압은 정지 토압에 의한 구속압과 "포아송 효과"라고 부르는 횡방향 팽창에 의해 증가되는 구속압으로 이루어져 있다. 본 논문에서는 압축형 앵커인 SSC 앵커의 내하체 압축시험을 통해 앵커 설계법을 제안하고, 이 설계법을 사용하여 앵커의 인발저항력을 계산하는 컴퓨터 프로그램을 개발하였다.그램을 개발하였다.

• Archives of Plastic Surgery
• /
• 제36권3호
• /
• pp.322-326
• /
• 2009

Purpose: Severe type of inverted nipple (cannot be pulled out above the areola plane by manipulation, grade III) usually cannot be corrected by a relatively simple purse - string suture technique. Most patients want to avoid visible scars. To treat the severe case and avoid visible stigma, we introduce this invisible dermal flap method. Methods: This new surgical procedure makes bilateral incisions on the sidewall of nipple and dissections vertically to free the ducts from the contracted tissues. After dissection, the tunnel is formed. We insert "dermal flaps" into the tunnel underneath nipple base. Then through - and - through sutures are performed vertically (6 o'clock and 12 o'clock positions) and the purse - string suture is added with 4 - 0 nylon. Results: We had treated 35 primary inverted nipples (grade III) in 27 patients and 13 recurrent nipples in 7 cases. The results were excellent in 45 nipples (93.7%). All but 3 recurred cases was fully or very satisfied with the results. Conclusion: This technique is effective for the correction of severe inverted nipples and recurrent cases. We can avoid the visible scars on the areola surface.

• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.122-131
• /
• 1995

The research trends for metal matrix composites have been on basic mechanical properties, fatigue behavior after aging and fractographic observations. In this study, the fatigue crack initiation as well as the fatigue crack growth behavior and the fracture mechanism were investigated through observations of the fracture surface on silicon carbide particles reinforced aluminum metal matrix composites(SiCp/Al). Based on the fractographic study done by scanning electron microscope and replica, crack growth path model and fracture mechanism are presented. The mechanical properties, such as the tensile strength, yield strength and elongation of SiCp/Al composites are improved in a longitudinal direction, however, the fatigue life is shorter than the basic Al6061 alloys. From fractographic observations, it is found that the failure mode is ductile in basic Ai6061 alloys. And because some SiC particles were pulled out from the matrix and a few SiC particles could be seen on the fracture surface of SiCp/Al, crack growth paths are believed to follow the interface of the matrix and its particles.

• 수산해양기술연구
• /
• 제22권2호
• /
• pp.7-15
• /
• 1986

In order to investigate the performance for the mackerel purse seine of one boat purse seiner using in the sea area of Cheju Island, a model net is made of the scale of 1/400 of its full scale, and model test on the shape of net and the tension of purse line is carried out in the stagnant water channel of the circulating water tank. Designing and testing for the model net are based on the Tauti's law. The obtained results are as follows; 1. The sinking rate of net is maximized the value of 6.40 m/min from 5 to 10 minutes after shooting net, and the mean value is 6.13 m/min. 2. The enclosed area formed with the float line after pursing operation is 76-84% of the area which is formed immediately after the shooting operation. At that time, purse seine is pulled inward the circle of surrounding net about 26.5% of the diameter. 3. In operating, when longitudinal section area of the central part of the net is maximized, the split area of both the wing-ends is 31-32% of the former. 4. When the time for the completing of pursing is 20 minutes, the maximum tension of the purse line is about 10.2 tons.

• International Journal of Quality Innovation
• /
• 제8권2호
• /
• pp.132-146
• /
• 2007

Constructing an effective production control policy is the most important issue in wafer fabrication factories. Most of researches focus on the input regulations of wafer fabrication. Although many of these policies have been proven to be effective for wafer fabrication manufacturing, in practical, there is a need to help operators decide which lots should be pulled in the right time and to develop a systematic way to alleviate the long queues at the bottleneck workstation. The purpose of this study is to construct a photolithography workstation dispatching rule (PADR). This dispatching rule considers several characteristics of wafer fabrication and influential factors. Then utilize the weights and threshold values to design a hierarchical priority rule. A simulation model is also constructed to demonstrate the effect of the PADR dispatching rule. The PADR performs better in throughput, yield rate, and mean cycle time than FIFO (First-In-First-Out) and SPT (Shortest Process Time).

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1462-1465
• /
• 2005

In this report, the FE characteristics of carbon nanotubes (CNTs) treated using both thermal annealing and mechanical coatings on the as-grown CNTs system atically studied. It was found that in the high temperature annealed samples, CNTs were attacked at its root during annealing due to a small amount of oxygen, and were pulled out of the substrate in places after FE measurements because of the contact resistance. However, for the mechanically coated samples both with spin on glass (SOG) and polymethyl methacrylate (PMMA), CNTs were found to be nearly intact after FE measurements and showed reliable FE characteristics over repeatable voltage scan. The reliability of CNTs during FE could be owing to the strong adhesion of CNTs to the substrate both by SOG and PMMA coatings.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.49-50
• /
• 2010

본 연구에서는 인발시험에 따른 실험적 분석을 통해 고온상태의 콘크리트에서 리브 형태의 GFRP rebar의 부착거동을 분석하였다. 콘크리트에 부착된 리브 형태의 GFRP rebar의 인발실험을 통해 부착 응력에 따른 정확한 인발 곡선 결과를 도출하였으며, 이를 위해 콘크리트 표면 주위를 물고 떨어지는 뽑힘 파괴를 유도하였다. 본 연구는 온도 영향에 따른 부착응력을 분석하였다. 실험실 온도에 따른 부착응력 시험 결과 비교적 높은 부착강도를 보였으나 콘크리트 내부 온도가 증가함에 따라 부착응력은 감소하는 것으로 나타났다.

• 한국생산제조학회지
• /
• 제24권2호
• /
• pp.198-202
• /
• 2015

We present a series of simple but novel nanopatterning methodologies inspired by traditional mechanical machining processes involving rolling, pullout, and forging. First, we introduce roll-to-roll nanopatterning, which adapts conventional rolling for continuous nanopatterning. Then, nano-inscribing and nano-channel lithography are demonstrated, whereby seamless nanogratings can be continuously pulled out, as in a pullout process. Finally, we discuss vibrational indentation micro- and nanopatterning. Similarly to the forging/indentation process, this technique employs high-frequency vertical vibration to indent periodic micro/nanogratings onto a horizontally fed substrate. We discuss the basic principles of each process, along with its advantages, disadvantages, and potential applications. Adopting mature and reliable traditional technologies for small-scale machining may allow continuous nanopatterning techniques to cope with scalable and low-cost nanomanufacturing in a more productive and trustworthy way.