• 대한토목학회논문집
• /
• 제29권6C호
• /
• pp.313-319
• /
• 2009

본 연구에서는 접이식 웨지를 장착한 강관네일의 거동 특성 평가를 위해 현장인발시험 및 3차원 수치해석을 수행하였다. 접이식 웨지를 장착한 강관네일의 현장인발시험 결과 접이식 웨지가 없는 경우에 비해 약 30% 정도의 인발 저항 증진효과가 있는 것으로 평가되었다. 한편, 강관네일의 합리적인 인발거동 분석을 위해 3차원 수치해석에서는 접이식 웨지가 장착 되지 않은 강관네일의 역해석을 통하여 현장 인발거동과 일치하는 네일과 지반사이의 마찰 특성을 평가하고, 이를 접이식 웨지가 장착된 강관네일의 해석에 도입하여 그 거동을 분석하였다. 시행착오를 통한 역해석 결과 그라우트와 지반 사이의 마찰계수(${\mu}$)는 약 1.2 정도가 발휘되는 것으로 평가되었으며, 강관네일의 극한인발저항력은 $$T_L{\sim_=}32$$ tonf으로 접이식 웨지가 장착되지 않은 네일의 $$T_L{\sim_=}24$$ tonf 보다 약 33% 증가하는 것으로 평가되어 현장인발시험결과와 거의 일치하는 것으로 나타났다.

• Journal of Korea Trade
• /
• 제26권6호
• /
• pp.20-40
• /
• 2022

Purpose - In recent times, the international trade environment has been changing rapidly, centering on the online market. In the post-COVID-19 era, small and medium-sized trading companies are facing the problem of not being properly provided with overseas market research, market trend analysis, and trade-related information. Cloud-based digital trade is being sought as an alternative to solve these problems; however, there is a lack of research on the intention to switch to digital trade among small and medium-sized trading companies. Therefore, this study empirically analyzes the intention to switch to digital trade based on the migration theory, and through this, attempts to identify each factor that affects the intention to switch to digital trade. Design/methodology - In this study, in order to identify factors influencing intention to switch to digital trade and innovation resistance of small and medium-sized trading companies, through previous research on migration theory and the PPM (Push, Pull, Mooring) model, each variable was selected for the purpose of the study. Based on this, a research model was established for the factors affecting switching to digital trade of small and medium-sized trading companies and empirically analyzed. In addition, considering the differences in the innovation propensity and maturity of information infrastructure of trading companies as the recipients of innovation, this study analyzes the moderating effect of the mooring effect and seeks ways to establish specific strategies according to the degree. Findings - As a result of empirical analysis, the pull effect was found to have the greatest influence on intention to switch to digital trade. However, the pull factor was found to have an effect on user resistance, and it was confirmed that it was a factor simultaneously inducing positive and negative consumption behaviors among users. In addition, it was found that the higher the company's innovation propensity, the higher the pull effect's influence on the intention to switch, and analysis showed that the push effect had no influence. In addition, companies with high information infrastructure maturity were expected to have a relatively high level of intention to switch compared to companies with low information infrastructure maturity, and the difference between the two groups was found not to be statistically significant. Originality/value - This study is a timely study in that it demonstrated the effect on the switching to cloud-based digital trade for small and medium-sized trading companies and that the cloud system related to digital trade is in full swing. There are academic implications in that it revealed that the pull effect is an important factor in the intention to switch to cloud service. Practical implications were presented in that small and medium-sized trading companies suggested ways to increase the value of the cloud system for switching to digital trade and a way to increase the switching ratio by minimizing the mooring effect. In addition, the study argues that active institutional support from the government is needed to activate cloud service.

• 한국강구조학회 논문집
• /
• 제30권2호
• /
• pp.105-114
• /
• 2018

최근 건축물의 보수, 보강 및 리모델링시 중량물 및 구조부재를 부착시키거나 고정하는데 있어서 시공의 유연성 및 용이성으로 후설치 부착식 케미컬 앵커의 사용량이 점점 증가하고 있는 실정이다. 외국에서는 1980년대 초부터 후설치 부착식 케미컬 앵커에 대한 다양한 해석 및 실험을 통한 설계식을 제시하여 실제 설계에 사용하고 있으나, 현재 우리나라에서는 설계자와 시공자가 신뢰할 수 있는 명확한 설계기준이 없는 상태로서 외국의 설계기준에 의존하고 있는 실정이다. 따라서 본 연구에서는 비균열 무근콘크리트에 매입된 후시공 앵커를 대상으로 앵커간격, 묻힘깊이 그리고 연단거리를 변수로 한 인발실험을 통하여 케미컬앵커의 인발강도에 미치는 제요소를 평가하고자한다.

• 전력전자학회논문지
• /
• 제10권6호
• /
• pp.592-597
• /
• 2005

푸시 풀 포워드 컨버터는 넓은 입력범위에서 저전압 대전류 특성이 좋고 싱글 EI-EE 코어에 출력 인덕터와 변압기 그리고 입력 필터 등 모든 자성소자들을 포함시킴으로써 집적화할 수 있다. 회로의 여러 변수들에 대한 효율 비교를 통해서 집적화된 싱글 코어 푸시 풀 포워드 컨버터에 대해 고찰하였다. 푸시 풀 포워드 컨버터의 변압기는 Nicera사의 5M FEE 18/8/10C와 NC-2H FEI32/8/10C 코어를 이용하였다. 컨버터의 정격은 입력 전압 $36\~72V$이며 출력은 3.3V, 30A이다. NC-2H FEI32/8/10C코어를 사용하였을 경우 스위칭 주파수가 200kHz이고 부하가 11A일 때 $83.5\%$의 최고 효율이 측정되었다. 전부하(full load)시의 효율은 $76.4\%$, 반부하(half load)일 경우에는 $82.95\%$의 효율이 각각 측정 됐다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권4호
• /
• pp.51-58
• /
• 2016

콘크리트 구조물은 내구성과 경제성이 확보된 건설재료이지만, 매립된 철근의 부식은 내구적인 문제뿐 아니라 구조물의 안전성에 큰 영향을 준다. 본 연구는 유리섬유와 강재를 에폭시로 일체화 시킨 FRP Hybrid Bar를 적용한 콘크리트에 대해 염해 침투 저항성과 부식수준에 따른 부착성능을 평가하였다. 이를 위해 일반 강재를 적용한 OPC(Ordinary Portland Cement)시편과 GGBFS를 30% 혼입한 시편에 대하여 부식을 0~10% 촉진하여 부착력을 평가하였다. 또한 FRP Hybrid Bar는 에폭시 코팅으로 인해 보통 상태에서는 부식 진전이 매우 작으므로 notch를 인위적으로 가하여 OPC 콘크리트에 매립시켰으며, 이후 부식실험을 수행하였다. 실험 결과, 부식된 철근의 부착력이 21% 수준으로 감소해도 FRP Hybrid Bar에 발생된 notch는 부착력에 큰 영향이 없는 것으로 평가되었다. 또한 GGBFS 콘크리트를 사용한 부재의 경우, 통과 전류가 감소하여 일반철근을 사용해도 70%이상의 부착력을 유지하고 있었다.

• 한국건축시공학회지
• /
• 제22권2호
• /
• pp.149-160
• /
• 2022

본 연구에서는 국내에서 생산되는 목재와 접착제를 활용한 Glued-in rod 접합부의 인발성능을 평가하고자 접착제의 종류, 철근의 매입깊이 및 매입방향을 고려한 인발성능 실험연구를 수행하였다. 실험결과, 액상형 접착제 사용 실험체가 더 우수한 인발성능을 보여주었으며, 철근의 매입깊이가 길어질수록 철근의 항복을 먼저 유도하여 높은 최대 인발하중을 보여주었다. 인발성능 실험결과를 통하여 철근의 항복강도보다 접착제의 부착강도를 더 강하게 설계하는 것이 유리한 Glued-in rod 접합부 설계식을 제안하였으며, 접착제의 부착강도의 시공오차를 고려한 보정계수 0.75 또한 제안하였다.

• Advances in pediatric surgery
• /
• 제10권1호
• /
• pp.60-62
• /
• 2004

Leveling colostomy with a frozen-section biopsy in a Hirschsprung's disease is an important factor for a successful procedure. Two neonatal cases of Hirschsprung's disease in the descending colon are reported. In both cases, loop ileostomy was established because of the unavailability of frozen-section biopsy on an emergency basis. At the time of definitive procedure of the first case, transition zone at the splenic flexure was noted and was compatible with the frozen section biopsy. In the second case, an unexpected longer resection at a higher level than transition zone was required because of the poor vascularity after dissection. In conclusion, a leveling colostomy should be selected as a choice in long-segment Hirschsprung's disease. Confirming preservation of the marginal artery of Drummond is particularly important in case of Hirschsprung's disease in the descending colon.

• Journal of Chest Surgery
• /
• 제17권2호
• /
• pp.280-285
• /
• 1984

Although it is suspected that the foreign body sensation on the pharyngoesophageal region is caused by motility disturbance of upper esophageal sphincter, its pathophysiology is not yet clear. Esophageal manometry has become an important diagnostic tool in the evaluation of esophageal motor disorders such as dysfunction of upper esophageal sphincter. Intraluminal esophageal pressures were measured by perfusion manometry in fifteen patients with foreign body sensation on the pharyngoesophageal region and in twenty six controls. In upper esophageal sphincter, mean value of resting pressure of the patients by rapid pull-through technique was 45,9\ulcorner 15.6mmHg and 80.9\ulcorner9.7mmHg in the controls. The difference between the two groups was statistically significant. The distance from nostril to sphincter, length of sphincter, and resting pressure by station pull-through technique were not significantly different. The amplitude of esophageal peristalsis in the patients was reduced significantly at the level of the upper, mid and lower esophagus. The wave duration of the patients was reduced significantly at the level the upper and mid esophagus. The speed showed no difference between two groups. Length and resting pressure of lower esophageal sphincter revealed almost same values in two groups.

• 한국CDE학회논문집
• /
• 제5권2호
• /
• pp.184-195
• /
• 2000

MDO (Multidisciplinary Design Optimization) methodology is an emerging new technology to solve a complicate structural analysis and design problem with a large number of design variables and constraints. In this paper MDO methodology is adopted through the use of computer aided systems such as Geometric Solid Modeller, Mesh Generator, CAD system and CAE system. And this paper introduces MDO methodology as a new method for structural analysis and design through the application to the structural design of flap drive system. In a MDO methodology application to the structural design of flap drive system, kinetodynamic analysis is done using a simple aerodynamic analysis model for the air flow over the flap surface instead of difficult aerodynamic analysis. Simultaneously the structural static analysis is done to obtain the optimum structural condition. And the structural buckling analysis for push pull rod is also done to confirm the optimum structural condition (optimum cross section shape of push pull rod).

• Advances in pediatric surgery
• /
• 제9권2호
• /
• pp.121-124
• /
• 2003

Diffuse cavernous hemangioma of the rectosigmoid is a rare lesion usually presented in children and young adult, often with life threatening hemorrhage. The clinical diagnosis is difficult and often delayed because of lack of awareness of the clinical features. We report a case of diffuse cavernous hemangioma of the rectosigmoid in a 12 year old boy who had undergone suture ligation under the impression of hemorrhoid at his age 3. Sphincter saving coloanal pull through procedure were applied as the surgical treatment. Sclerotherapy was needed with recurrent rectal bleeding 6 months after the pull through operation. The patient is well at 12 months follow-up.