• 대한조선학회논문집
• /
• 제58권1호
• /
• pp.40-48
• /
• 2021

Through a series of bollard pull tests of a propeller in partially submerged condition, thrust, torque, and shaft excitation force of a conventional propeller model were measured using a six-component load cell. By variation of the Weber number and Reynolds number, a consistent towing tank model test condition was derived. The effects of propeller immersion depth on the ventilation behavior and change of force and moment acting onto the propeller shaft were investigated. The decrease in thrust owing to the inception of ventilation was confirmed, and a large degree of dispersion of the thrust and torque coefficients were also observed in the transition region where the blade tip was under the water surface. The shaft excitation force was derived from the force and moment onto the propeller shaft.

• 한국해안·해양공학회논문집
• /
• 제30권6호
• /
• pp.298-305
• /
• 2018

본 연구에서는 해양 항만 콘크리트 구조물의 보수작업을 위한 수중코팅제의 부착 특성을 조사하기 위하여 실험적 연구를 수행하였다. 고려된 실험변수는 코팅제의 종류, 코팅대상 모재의 표면 거칠기, 도포 작업환경(육상 혹은 수중)으로 부착 강도는 Pull-off 방식으로 측정하였다. 코팅제의 부착 강도는 각 수중코팅제의 도포 작업 완료 24시간 후에 ASTM C1583 규정에 따라 측정하였다. 또한, 콘크리트 모재와 코팅제 간의 부착파괴 거동(코팅제, 계면, 콘크리트 모재)을 육안으로 관찰하였으며 측정된 부착 강도 수치에 근거하여 각 실험요인의 비교분석을 수행하였다. 실험결과, 수중에서 도포한 코팅제의 부착 강도가 육상의 경우에 비해 감소하는 경향을 보였으며 수중환경에서는 부착 강도에 미치는 모재 표면 거칠기의 영향이 육상의 경우에 비하여 미비하였다. 마지막으로 수중코팅제의 선정, 사용 시에 유의할 점에 대하여 설명하였다.

• 스마트미디어저널
• /
• 제10권2호
• /
• pp.110-118
• /
• 2021

4차 산업혁명의 핵심 성장 동력인 사물인터넷 (IoT) 기술은 자율 형으로 상호 소통하며 공간과 상황에 따른 데이터를 복합처리 할 수 있는 단계로 성장하였다. 이에 따라 IT 인프라 구조는 점점 복잡해지고 시스템을 안정적으로 유지하기 위한 모니터링 분야의 중요도가 높아지고 있다. 모니터링 기술은 과거에도 사용되었지만, 빠르게 변하는 ICT 기술에 대응할 수 있는 유연한 모니터링 시스템을 모색할 필요성이 있다. 본 논문은 오픈소스 기반 Prometheus 모니터링 시스템을 설계하고 테스트 하는 연구를 진행한다. IoT 디바이스를 기반으로 간단한 인프라를 구축하고 Exporter를 통해 디바이스에 대한 데이터를 수집한다. Prometheus는 데이터를 Pull 기반으로 수집한 뒤 Grafana를 사용하여 하나의 대시보드에 통합하고 데이터를 시각화함으로써 디바이스에 대한 정보를 모니터링 할 수 있다.

• 한국건설순환자원학회논문집
• /
• 제10권2호
• /
• pp.168-175
• /
• 2022

최근 나노기술의 발달로 건설재료분야에 이의 적용이 지속적으로 증가하고 있는 실정이다. 하지만 현재까지는 압축강도 50 MPa, 단위중량 16 kN/m³ 정도의 고강도 경량 콘크리트를 구조부재에 적용하기 위한 콘크리트와 철근의 부착 특성에 관한 연구가 부족한 실정이다. 따라서 본 논문에서는 압축강도 50 MPa, 단위중량 16 kN/m³ 정도의 고강도 경량 콘크리트 81개의 시편을 제작하여 직접 인발 부착실험을 수행하였고, 실험결과와 현행 설계기준과 비교하여 부착특성을 평가하였다. ACI-408R의 부착강도 산정식과 실험결과는 비교적 유사한 것으로 판단되며, 통계분석을 통해 CEB-FIP, 수정된 CMR 부착거동 모델을 산정한 결과, 평균적으로 잘 묘사하는 것으로 판단된다.

• Smart Structures and Systems
• /
• 제29권3호
• /
• pp.445-455
• /
• 2022

Steel anchor bolts are installed in concrete using a variety of methods. One of the most common methods of anchor bolt installation is using epoxy resin as an infill material injected into the drilled hole to act as a bonding material between the steel bolt and the surrounding concrete. Typical design standards assume uniform stress distribution along the length of the anchor bolt accompanied with single crack leading to pull-out failure. Experimental evidence has shown that the steel anchor bolts fail owing to the multiple failure patterns, hence these design assumptions are not realistic. In this regard, the presented research work details the analytical model that takes into consideration multiple micro cracks in the infill material induced via impact loading. The impact loading from the Schmidt hammer is used to evaluate the bond condition bond condition of anchor bolt and the epoxy material. The added advantage of the presented analytical model is that it is able to take into account the various type of end conditions of the anchor bolts such as bent or U-shaped anchors. Through sensitivity analysis the optimum stiffness and shear strength properties of the epoxy infill material is achieved, which have shown to achieve lower displacement coupled with reduced damage to the surrounding concrete. The accuracy of the presented model is confirmed by comparing the simulated deformational responses with the experimental evidence. From the comparison it was found that the model was successful in simulating the experimental results. The proposed model can be adopted by professionals interested in predicting and controlling the deformational response of anchor bolts.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.3027-3031
• /
• 2011

In this study, By the time that TTX technology is adopted as railway rolling stock, we analyzed quantitatively energy saving by reducing the power consumption with the reduction of the operation time through the speed improvement and suggested the necessity to introduce TTX technology in the domestic rail vehicles. The effect of energy saving by comparing and analyzing the power consumption during the operation by TTX Hanvit 200 and 8200 electric locomotives to pull trains on the same line was suggested and the efficiency of the main devices(i.e C/I) of Hanvit 200 was compared and analyzed by measuring the power consumption by a single unit. For improving KORAIL management environment, reducing energy usage is an urgent challenge, its measures for solving them are constantly considered in many areas. In addition, at the time of improving the conventional track to speed up and changing the signals, Tilting technology will be contributed to the management environment by enlarging the passengers' demand through the reduction of the operation time and saving energy using the existing infrastructure.

• 산경연구논집
• /
• 제10권1호
• /
• pp.59-67
• /
• 2019

Purpose - The Millennial Generation, which grew in the wake of the spread of the Internet and rapid changes in the media environment, is rapidly moving from the traditional broadcasting environment to the Internet-broadcasting environment in terms of content acceptance. With the emergence of UGC (User-generated content), the change in the status of single-person content creators enables the growth of multi-channel networks (MCN), a new content-distribution platform and an agency concept for single creators. Youtube-based MCN produces multiple single star producers and casts and provides its own video series through Youtube. It is also emerging as a major M&A target for global media providers in terms of providing content to a wide range of consumers with the same interests and consumption characteristics. In addition, for the Millennials generation, which are part of their lives, MCN is becoming the most suitable media for TGIF (Twitter, Google, i-phone, Facebook). Accordingly, this study defines newly emerging MCNs and analyzes the factors for accepting MCN-produced content based on the push-pull-mooring (PPM) model. Research design, data, and methodology - An empirical analysis is performed through a questionnaire survey. For this purpose, 204 people who have experience of watching MCN were studied. Collected data is processed through analysis of a structural equation model using R to test the hypothesis. Results - For the MCN service to become an alternative to existing media, it is necessary to continuously promote cultural diversity and diversity of attempts that conventional media cannot provide. It is the attractiveness of the alternative that has the greatest influence on the intention to switch to a MCN service. When we look at MCN content so far, certain patterns such as game progress, introduction, food, and chat rooms have already appeared. We need to overcome this and develop a completely new conceptual content that we have never seen before. This requires a more generous viewer perception of the topics covered. For diversity, linguistic and verbal violence should be tolerant in common sense to provide a foundation for securing cultural diversity. Conclusions - In this study, we tried to develop a comprehensive approach to the substitution effect of MCN. In terms of academic achievement, the PPM model is used to enhance the utilization of media and broadcasting. Practical implications are to provide an analytical framework for verifying alternative or complementary effects when viewers switch to MCN.

• 대한전기학회논문지
• /
• 제41권9호
• /
• pp.960-972
• /
• 1992

This paper deals with the development of expert system in distribution system which combined with graphic user interface. The proposed expert system can recognize and adjust to the system change, and includes the rule bases of security monitoring. Also it provides load transfer algorithm for efficient load distribution. The graphic user environment for expert system is implemented in the mouse-oriented user interface with overlapped window functions and pull-down menus. Therefore, the developed graphic integrated expert system can afford to assist system operators very conveniently through the various graphic function in proposing an optimal plan of load transfer for fault restoration and outage schedule.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1991년도 가을 학술발표회 논문집
• /
• pp.17-22
• /
• 1991

An accurate and efficient analytical model describing the bond effect between reinforcing steel and concrete without taking the double nodes is presented. To increase the efficiency of the solution and reduce the number of degrees of freedom, the reinforcing bar elements are considered to be embedded in the connote elements. Relative douses of freedom accounting for the relative slip between reinforcing steel and concrete are condensed out during the stiffness formation phase. However, these degrees of freedom Can be taken into account explicitly by solving the constructed global equilibrium equation for each reinforcing steel. The usefulness of proposed model is established through the comparison with the experimental data subjected on push and push-pull loadings.

• 대한치과의사협회지
• /
• 제48권8호
• /
• pp.587-593
• /
• 2010

The management of malignant tumors of the oral cavity requires that the resection should be performed with adequate negative margins. To this end, the surgeon is sometimes required to increase the access to the oral cavity to resect with clear margins although most of our resections can be carried via the transoral route. This article highlights some of the most common surgical accesses to the oral cavity: Peroral approach, mandibulotomy and mandibular swing approach, visor flap approach, upper & lower cheek flap approach, pull-through technique. Also, various modes of management are grossly described according to primary site, size, and stage of the tumors.