• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.451-451
• /
• 2013

현재 세계적으로 에너지 공급원의 다변화가 시급한 실정이며 그 후보로 태양에너지, 풍력 및 수력에너지와 같은 신재생 에너지에 대한 연구분야가 부각되고 있다. 전체 에너지 중 신재생 에너지의 비중은 빠르게 증가되고 있으며, 그 중에서도 태양광에너지의 분야가 가장 활발히 연구되고 있다. 특히, III-V족 화합물 반도체 태양전지는 직접 천이형 밴드갭을 가지고 있어 기존 실리콘 태양전지에 비해 광 흡수율이 높은 장점을 가지고 있다. 따라서 본 연구에서는 Molecular Beam Epitaxy (MBE)장치를 이용하여 성장온도에 따른 p-n접합 GaAs 태양전지 구조를 제작하여, 광전변환 효율과 결함구조 관련성을 조사하였다. 먼저 Si이 $1{\times}10^{18}cm^{-3}$으로 도핑된 n형 GaAs기판위에 성장온도 $480^{\circ}C$와 $590^{\circ}C$에서 Be을 $5{\times}10^{18}cm^{-3}$ 도핑한 p 형 GaAs를 200 nm 두께로 각각 성장하여, 2개의 p-n 접합 GaAs 태양전지 구조를 제작하였다. 시료의 전기적 특성과 결함상태는 Capacitance-Voltage (C-V) 와 Deep Level Transient Spectroscopy (DLTS)를 사용하여 조사하였다. DLTS 측정을 위해 p-형의 GaAs박막 위에 Au(300 nm)/Pt(30 nm)/Ti(30 nm)를 e-beam evaporator로 증착한 후, 직경 $300{\mu}m$의 메사 에칭으로 p-n접합 다이오드 구조를 제작하였다. 본 연구를 통해 GaAs p-n접합구조 성장온도에 따른 광전변환 효율과 결함상태와의 물리적인 연관성을 논의할 것이다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.329.2-329.2
• /
• 2014

지난 수년간 태양전지의 광전변환효율을 높이기 위해 자가 조립된 InAs 또는 GaSb와 같은 양자점을 GaAs 단일 p-n 접합에 적용하는 연구를 개발해 왔다. 그러나 양자점의 흡수 단면적에 의한 광 흡수도는 양자점층을 수십 층을 쌓으면 증가하지만 활성층에 결함을 생성시킨다. 생성된 결함은 운반자트랩으로 작용하여 태양전지의 광전변환효율을 감소시킨다. 본 실험에서는 양자점이 적용된 태양전지와 적용되지 않은 태양전지의 광전변환 효율을 비교하고, 깊은준위 과도용량 분광법을 이용하여 결함상태를 측정 및 비교함으로써, 활성층 내부에 생성된 결함이 광전변환 효율에 미치는 영향을 분석하였다. 소자구조는 분자선 증착 방법을 이용하여, 먼저 n+-형 GaAs기판위에 n+-형 GaAs를 250 nm 증착한 후, 도핑이 되지 않은 GaAs활성층을 $1{\mu}m$ 두께로 증착하였다. 마지막으로 n+ 와 p+-형 GaAs를 각각 50, 750 nm 증착함으로써 p-i-n구조를형성하였다. 여기서, n+-형 GaAs 과 p+-형 GaAs의 도핑농도는 동일하게 $5{\times}1018cm-3$로 하였다. 또한 양자점을 태양전지 활성층에 20층을 형성하였다. 이때 p-i-n 태양전지 와 양자점 태양전지의 광전변환 효율은 각각 5.54, 4.22 % 를 나타내었다. p-i-n 태양전지의 개방 전압과 단락전류는 847 mV, 8,81 mA이며 양자점 태양전지는 847 mV, 6.62mA로 확인되었다. 태양전지의 전기적 특성을 측정하기 위해 소자구조 위에 Au(300nm)/Pt(30nm)/Ti(30nm)의 전극을 전자빔증착장치로 증착하였으며, 메사에칭으로 직경 $300{\mu}m$의 태양전지 구조를 제작하였다. 정전용량-전압 특성 및 깊은준위 과도용량 분광법을 이용하여 태양전지의 결함분석 및 이에 따른 광전변환 특성인자와의 상관관계를 논의할 것이다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.160-160
• /
• 2010

In this work, we investigate ohmic contacts to p-type GaN using a Pt/Cu/Au metallization scheme in order to achieve low resistance and thermally stable ohmic contact on p-GaN. An ohmic contact formed by a metal electrode deposited on a highly doped InGaN/GaN superlattice sturucture on p-GaN layer. The specific contact resistance is $1.56{\times}10^{-6}{\Omega}cm^2$ for the as-deposited sample, $1.35{\times}10^{-4}{\Omega}cm^2$ for the sample annealed at $250^{\circ}C$ and $6.88{\times}10^{-3}{\Omega}cm^2$ for the sample annealed at $300^{\circ}C$.

• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4441-4448
• /
• 2022

The electrochemical oxidation process has been widely studied in the field of wastewater treatment for the decomposition of organic materials through oxidation using ·OH generated on the anode. Pt anode electrodes with high durability and long-term operability have a low oxygen evolution potential, making them unsuitable for electrochemical oxidation processes. Therefore, to apply Pt electrodes that are suitable for long-term operation and large-scale processes, it is necessary to develop a new method for improving the decomposition rate of organic materials. This study introduces a method to improve the decomposition rate of organic materials when using a Pt anode electrode in the electrochemical oxidation process for the treatment of organic decontamination liquid waste. Electrochemical decomposition tests were performed using sodium dodecylbenzenesulfonate (SDBS) as a representative organic material and a Pt mesh as the anode electrode. Y₂O₃ particles were introduced into the electrolytic cell to improve the decomposition rate. The decomposition rate significantly improved from 21% to 99%, and the current efficiency also improved. These results can be applied to the electrochemical oxidation process without additional system modification to enhance the decomposition rate and current efficiency.

• Korean Journal of Materials Research
• /
• v.7 no.9
• /
• pp.805-810
• /
• 1997

MBE에 의해 성장된 Zn$_{1-x}$ Fe$_{x}$Se박막의 미세구조가 고분해능 투과전자현미경에 의해 연구되었다.Zn$_{1-x}$ Fe$_{x}$Se 박막에서 CuAu-l과 CuPt의 규칙격자가 발견되었다. 이 규칙격자는 전자 회절과 단면 고분해능 격자 이미지에 의해 조사되었다.CuAu-l규칙격자는 (001)InP기판 위에 성장된 Zn$_{1-x}$ Fe$_{x}$Se(x=0.43)에서 관찰되었고, 반면에 CuPt규칙격자는 (001)GaAs기판 위에 성장된 Zn$_{1-x}$ Fe$_{x}$Se(x=0.43)에서 관찰되었다.43)에서 관찰되었다.

• Korean Journal of Clinical Pharmacy
• /
• v.8 no.2
• /
• pp.122-132
• /
• 1998

SB-31 which contains Pursatilla, Licoris and Ginseng extracts was recently proved as an anticancer agent. In a preclinical effort to be applied this drug to human, pharmacokinetics of SB-31 was carried out in rats and rabbits. Glycyrrhizin(GZ), a saponin of Licoris was used as a standard ingradient for the pharmacokinetics of SB-31. The rat's blood, bile and urine samples were serially collected in femoral vein, common bile duct and bladder, respectively, after bolus i.v. injection at a dose of 1 or 1/5 ampul/rat and rabbit's blood samples from the marginal ear vein at a dose of 1 or 3 amp./rabbit. GZ and glycyrrhetic acid(GA), a major metabolite of GZ in the physiological samples were analysed by HPLC with UV detection. The decline of GZ in plasma concentration was generally biexponential at each dose. GZ was almost completely recovered in bile within 18 hour. GA wasn't detected in the samples with UV detector. In the rat, Vss and Kel at a dose of 1 and 1/5 ampul of SB-31 were $98.06\pm6.07\;ml,\;0.33\pm0.05\;hr^{-1}\;and\;65.46\pm11.19\;ml,\;0.68\pm0.25\;hr^{-1}$, respectively. Those in rabbits at a dose of 3 and 1 ampul of SB-31 were $235.24\pm30.72\;ml,\;0.13\pm0.36\;hr^{-1}\;and\;341.32\pm28.58\;ml,\;0.27\pm0.04\;hr^{-1}$, respectively. 'WinNonlin' was utilized for the compartmental analysis. A two-compartment model was chosen as the most appropriate pbarmaco-kinetic model. The data were best described by using a weighting factor of $1/y^2$. To evaluate the effect of SB-31 on cardiovascular system, serially diluted SB-31 was directly injected into coronary artery in the isolated perfused rat heart and the effect of PSF, PSH, saponins of Pursatilla, and SB-31 on PT, APTT of healthy human plasma was examined. Except the positive inotropic effect of ten times diluted solution of SB-31, there was no significant effect on LVDP, (- dp/dt)/(+dp/dt), heart rate and coronary flow in comparision with that of vehicle. SB-31 had no effect on PT but slightly delayed APTT about $6.9{\sim}11.5\%$. There was no significant effect of PSF and PSH on PT & APTT. Conclusively, SB-31 did not show any notable toxic effects on cardiovascular system.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.53.2-53.2
• /
• 2011

Dye-sensitized solar cells(DSSCs) have been recognized as an alternative to the conventional p-n junction solar cells because of their simple fabrication process, low production cost, and transparency. A typical DSSC consists of a transparent conductive oxide (TCO) electrode, a dye-sensitized oxide semiconductor nanoparticle layer, liquid redox electrolyte, and a Pt-counter electrode. In dye-sensitized solar cells, charge recombination processes at interfaces between coducting glass, $TiO_2$, dye, and electrolyte play an important role in limiting the photon-to-electron conversion efficiency. A layer of ZTO thin film less than ~200nm in thickness, as a blocking layer, was deposited by DC magnetron sputtering method directly onto the anode electrode to be isolated from the electrolyte in dye-sensitized solar cells(DSCs). This is to prevent the electrons from back-transferring from the electrode to the electrolyte ($I^-/I_3^-$). The presented DSCs were fabricated with working electrode of Ga-doped ZnO glass coated with blocking ZTO layer, dye-attached nanoporous $TiO_2$ layer, gel electrolyte and counter electrode of Pt-deposited GZO glass. The effects of blocking layer were studied with respect to impedance and conversion efficiency of the cells.

• Genes and Genomics
• /
• v.40 no.12
• /
• pp.1383-1388
• /
• 2018

The development of therapeutic bacteriophages will provide several benefits based on an understanding the basic physiological dynamics of phage and bacteria interactions for therapeutic use in light of the results of antibiotic abuse. However, studies on bacteriophage therapeutics against microbes are very limited, because of lack of phage stability and an incomplete understanding of the physiological intracellular mechanisms of phage. The major objective of this investigation was to provide opportunity for development of a novel therapeutic treatment to control respiratory diseases in swine. The cytokine array system was used to identify the secreted cytokines/chemokines after Bordetella bronchiseptica infection into swine nasal turbinate cells (PT-K75). We also performed the real-time quantitative PCR method to investigate the gene expression regulated by B. bronchiseptica infection or bacteriophage treatment. We found that B. bronchiseptica infection of PT-K75 induces secretion of many cytokines/chemokines to regulate airway inflammation. Of them, secretion and expression of IL-$1{\beta}$ and IL-6 are increased in a dose-dependent manner. Interestingly, membrane-bound mucin production via expression of the Muc1 gene is increased in B. bronchiseptica-infected PT-K75 cells. However, cytokine production and Muc1 gene expression are dramatically inhibited by treatment with a specific B. bronchiseptica bacteriophage (Bor-BRP-1). The regulation of cytokine profiles in B. bronchiseptica-induced inflammation by B. bronchiseptica bacteriophage is essential for avoiding inappropriate inflammatory responses. The ability of bacteriophages to downregulate the immune response by inhibiting bacterial infection emphasizes the possibility of bacteriophage-based therapies as a novel anti-inflammatory therapeutic strategy in swine respiratory tracts.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.5
• /
• pp.253-256
• /
• 2014

$Pb(Zr_{0.52}Ti_{0.48})O_3$ thin films of $1.5{\mu}m$ thickness were grown on $Pt/Ti/Gd_3Ga_5O_{12}$ substrate by RF magnetron sputtering at annealing temperatures ranging from $550^{\circ}C$ to $700^{\circ}C$. We evaluated the residual stress, by using a William-Hall plot, as a function of the annealing temperatures of PZT thin film with a constant thickness. As a result, the residual stresses of PZT thin film of $1.5{\mu}m$ thickness were changed by varying the annealing temperature. Also, we measured the hysteresis characteristic of PZT thin films of $1.5{\mu}m$ thickness to evaluate for application of an optoelectronic device.

• Applied Microscopy
• /
• v.45 no.4
• /
• pp.208-213
• /
• 2015

Nanomanipulators installed in focused ion beam (FIB), which is used in the lift-out of lamella when preparing transmission electron microscopy specimens, have recently been employed for electrical resistance measurements, tensile and compression tests, and in situ reactions. During the pick-up process of a single nanowire (NW), there are crucial problems such as Pt, C and Ga contaminations, damage by ion beam, and adhesion force by electrostatic attraction and residual solvent. On the other hand, many empirical techniques should be considered for successful pick-up process, because NWs have the diverse size, shape, and angle on the growth substrate. The most important one in the in-situ precedence, therefore, is to select the optimum pick-up process of a single NW. Here we provide the advanced methodologies when manipulating NWs for in-situ mechanical and electrical measurements in FIB.