• 공업화학
• /
• 제25권3호
• /
• pp.300-306
• /
• 2014

본 연구에서는, HCHO를 상온에서 제거하기 위한 귀금속계열의 촉매 연구를 수행하였다. 제조된 촉매들은 XRD, FT-IR, CO-chemisorption을 이용하여 특성분석을 수행하였다. 그 결과, Pt와 Pd를 활성금속으로 하여 제조한 환원촉매가 상온조건에서 우수한 HCHO 산화 능력을 보였으며, 지지체의 경우 환원성지지체로 잘 알려진 $TiO_2$를 이용하여 촉매를 제조하였을 때 높은 반응활성을 나타냈다. 또한, 환원시간이 길어짐에 따라 활성금속의 응집현상으로 인해 반응활성의 저하를 나타내었으며 환원촉매의 경우 상온조건에서 HCHO 흡착 및 탈착 특성이 우수함을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.200-201
• /
• 2007

The SBT($SrBi_2Ta_2O_9$) thin films with $Bi_2O_3$ buffer layer were deposited on Pt/Ti/$SiO_2$/Si substrate by R.F. magnetron sputtering method in order to improve the ferroelectric characteristics. In SBT thin films, the deficiency of bismuth during the process due to its volatility results in an obvious non stoichiometry of the films and the presence of secondary phases. $Bi_2O_3$ buffer layer was found to be effective to achieve the low temperature crystallization and improve the ferroelectric properties of SBT thin films. Ferroelectric properties and crystallinities of SBT thin films with various post annealing of $Bi_2O_3$ buffer layer were observed as various annealing temperature, using X-Ray Diffraction (XRD), scanning electron microscopy (SEM), Keithley 237 and HP 4192A Impedance Analyzer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.309-313
• /
• 1997

(Ba$_{x}$Sr$_{l-x}$)TiO$_3$(BST) thin fi1ms with various Ba/Sr ratios were deposited on Pt(80nm)/SiO$_2$(100nm)/Si by RF magnetron sputtering. BST thin films which have x=0.6, 0.5, 0.4 were studied dielectric properties with temperature variation. The frequency was used from 100Hz to 1MHz for measuring dielectric constant. The measurement conditions of dielectric constant with Temperature Variation were 1KHz and 2$0^{\circ}C$. As a result, the dielectric constant of BST thin film was about 425 and loss factor was 0.013. Also, with increasing Temperature, the dielectric constants of BST thin films were gradually decreased.sed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.582-585
• /
• 2004

Pb0.5Sr0.5TiO3 (PST) thin films were fabricated by the alkoxide-based sol-gel process using spin-coating method on Pt/Ti/SiO2/Si substrate. The PST films annealed from 500C to 650C for 1h show a perovskite phase and dense microstructure with a smooth surface. The grain size and dielectric constant of PST films increases with the increase in annealing temperature, which reduces the SiO2 equivalent thickness of the PST film. The crystallinity or internal strain in the PST thin films analyzed from the diffraction-peak widths correlate well with the decrease in the dielectric losses. The dielectric constants and dielectric loss (%) of the PST films annealed at 650c (teq : 0.89 nm) were 549 and 0.21%, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 반도체 재료 센서 박막재료 전자세라믹스
• /
• pp.153-156
• /
• 2004

The $Pb(Zr_{0.4}Ti_{0.6})O_3/Pb(Zr_{0.6}Ti_{0.4})O_3$ [PZT(4060)/(6040)] heterolayered thin films were deposited by RF sputtering method on the $Pt/TiO_2/SiO_2/Si$ substrate. The effects of the structural and dielectric properties of PZT heterolayered thin films were investigated. The MFM(Metal Ferroelectric Metal) type capacitors were made using the PZT(6040)/(4060) heterolayered thin films deposited with optimum deposition condition. An enhanced dielectric property was observed in the PZT(4060)/(6040) thin films. Investigating the dielectric constant and dielectric loss characteristics. the application for the next-generation dielectric thin films and memory devices were studied.

• 대한전자공학회논문지SD
• /
• 제38권7호
• /
• pp.473-478
• /
• 2001

강유전 물질인 Pb/sub 0.99/［(Zr/sub 0/6Sn/sub 0.4/)/0.9/Ti/sub 0.1/］0.98/Nb/sub 0.02/O₃(PNZST) 박막을 10 mole%의 과잉 PbO가 첨가된 타겟을 이용하여 La/sub 0.5/Sr/sub 0.5/CoO₃(LSCO)/Pt/Ti/SiO₂/Si 기판상에 RF 마그네트론 스퍼터링 방법으로 증착하였다. 증착된 박막에 대하여 온도와 시간을 다양하게 변화시키면서 급속 열처리(rapid thermal annealing) 한 후, 그 결정성과 전기적 특성을 조사하였다. 80 W의 RF 전력, 500 ℃의 기판온도에서 증착한 후, 급속 열처리된 박막이 페로브스카이트상으로 결정화되었으며, 650 ℃, 공기중에서 10초동안 급속 열처리된 박막이 가장 우수한 결정성을 나타내었다. 이러한 박막으로 제작된 PNZST 커패시터는 약 20 μC/㎠정도의 잔류 분극과 약 50 kV/cm 정도의 항전계를 나타내었으며, 2.2×10/sup 9/의 스위칭 후에도 잔류분극의 감소는 10 %미만이었다.

• 한국정보통신학회논문지
• /
• 제9권7호
• /
• pp.1491-1496
• /
• 2005

[ $Pb_{0.72}La_{0.28}TiO_3$ ] (PLT(28)) 박막을 sol-gel 법을 이용하여 제작한 후, 그 특성을 조사하여 ULSI DRAM 의 캐패시터 절연막으로서의 적용 가능성을 연구하였다. Sol-gel 법의 출발 물질로는 acetate 계를 사용하였다. TGA-DTA 분석을 통하여 PLT(28) 박막의 sol-gel 법에 의한 공정 조건을 확립하였다. 매 coating 후 $350^{\circ}C$ 에서 drying 하고, 마지막으로 $650^{\circ}C$ 에서 annealing 하여 $100\%$ perovskite 구조를 가지는 치밀하고 crack 이 없는 PLT(28) 박막을 얻었다. $Pt/Ti/SiO_2/Si$ 기판 위에 PLT(28) 박막을 형성하여 전기적 특성을 측정하였다. 그 결과 유전 상수와 누설전류밀도가 각각 936 과 $1.1{\mu}A/cm^2$ 으로 측정되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 기술교육위원회 창립총회 및 학술대회 의료기기전시회
• /
• pp.5-8
• /
• 2001

The $Sr_{0.8}Bi_{2.4}Ta_{2}O_{9}(SBT)$ thin films are deposited on Pt-coated electrode$(Pt/TiO_{2}/SiO_{2}/Si)$ using RF magnetron sputtering method. With increasing annealing tempera ture from $600[^{\circ}C]$ to $850[^{\circ}C]$, Bi-layered perovskite phase was crystallized above $650[^{\circ}C]$. The dielectric constant is 213 at annealing temperature of $750[^{\circ}C]$ and dielectric loss have a stable value within 0.1. Leakage current density is $1.01{\times}10^{-8} A/cm^{2}$ at annealing temperature of $750[^{\circ}C]$ The fatigue characteristics of SBT thin films did not change up to $10^{10}$ switching cycles.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1546-1548
• /
• 2001

The $Sr_{0.8}Bi_{2.4}Ta_2O_9$(SBT) thin films are deposited on Pt-coated electrode(Pt/$TiO_2$/ $SiO_2$/Si) using RF magnetron sputtering method. With increasing annealing temperature from 600[$^{\circ}C$] to 850[$^{\circ}C$], Bi-layered perovskite phase was crystallized above 650[$^{\circ}C$]. The dielectric constant is 213 at annealing temperature of 750[$^{\circ}C$] and dielectric loss have a stable value within 0.1. Leakage current density is $1.01{\times}10^{-8}A/cm^2$ at annealing temperature of 750[$^{\circ}C$].

• 한국전기전자재료학회논문지
• /
• 제19권7호
• /
• pp.667-672
• /
• 2006

Ferroelectric $Pb(Zr_{0.52}Ti_{0.48})O_3$ (PZT(52/48)) thick films were fabricated by the screen-Printing method on the alumina substrates, and $PbTiO_3$ (PT) Precursor solution, which prepared by sol-gel method, was spin-coated on the PZT(52/48) thick films to obtain a densification. Its structural and electrical properties of the PZT(52/48) thick films with the treatment of PT precursor solution coating were investigated. The particle size of the thick films was increased with increasing the number of coatings and the thickness of the PZT-6 (6: number of coatings) films was about $60{\mu}m$. The relative dielectric constant increased and the dielectric loss decreased with increasing the number of PT sol coatings. The relative dielectric constant and dielectric loss of the PZT-6 thick film were 475 and 2 %, respectively. The remanent polarization, coercive field and breakdown strength of the PZT-6 film were $32.6{\mu}C/cm^2$, 15 kV/cm and 60 kV/cm, respectively.