• The Korean Journal of Pharmacology
• /
• v.32 no.3
• /
• pp.323-334
• /
• 1996

Male Mongolian gerbils $(60{\sim}80g)$ were given DL-difluoromethylornithine (DFMO; 250mg/kg, ip) and methylglyoxal bis(guanylhydrazone) (MGBG; 50 mg/k, ip), respectively, 1 h prior to transient (7 min) occlusion of bilateral common carotid arteries (OBC7) and a daily dose of one of them for 6 days after recirculation, and the polyamine contents, activities of ornithine and S-adenosylmethionine decarboxylases (ODC and SAM-DC), and light microscopic findings of the hippocampus were evaluated. The hippocampal putrescine (PT) levels of the control gerbils treated with saline (STGr), markedly increased after OBC7, showing a peak level at 24 h after recirculation. The peak PT level was reduced in DFMO treated gerbils (DTCr) and in MGBG treated gerbils (MTGr). And 7 days after recirculation, the PT level of DTGr was decreased to about 75% of the PT level in the sham operated group (nonTGr) and to about 55% of the STGr level, respectively. The hippocampal spermidine (SD) level of STGr tended to decline, showing the lowest value at 8 h after recirculation. But the spermidine (SD) level of DTGr was somewhat higher at 8 h after OBC7 than those of STGr and MTGr The hippocampal spermine (SM) levels of all the experimental groups were little changed for 7 days after OBC. OBC7 markedly increased the hippocampal ODC activity. reaching a maximum (about 3 times higher than preischemic level) at 8 h and rapidly recovered to the control value by 24 h in STGr gerbils, and the OBC7-induced increase of ODC activity was significantly attenuated by DFMO or MGBG treatment. Whereas OBC7 induced a rapid decrease of the hippocampal SAMDC activity follwed by gradual recovery to the preischemic level, and the decrease of the SAMDC activity was slightly attenuated by DFMO or MGBG treatment. 7 Days after OBC7 the histological finding of the hippocampal complex stained with cresyl violet showed an extensive delayed neuronal damage in the CA1 region and to a lesser extent, in the dentate gyrus, sparing the CA3 region. And the neuronal death was aggevated by DFMO but significantly attenuated by MGBG. The immunochemical reactivity of hippocampus to anti-GFAP antibody was significantly increased in the CA1 region and to a lesser extent, in the dentate gyrus 7 days after OBC7, but was little changed in the CA3. And the increase of the anti-GFAP immunoreactivity was moderately enhanced by DFMO and significantly suppressed by MGBG. These results suggest that the polyamine metabolism may play a modulatory role in the ischemic brain damage.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.12
• /
• pp.101-107
• /
• 1995

To improve the leakage current, we developed two step sputtering method where PZT thin film in first deposited at room temperature followed by 600.deg. C deposition. The method used an amorphous PZT layer deposited at room temperature to keep a stable interface during sputtering at high temperature. PZT thin films were deposited on Pt/Ti/SiO$_{2}$/Si substrate at room temperature and 600.deg. C sequentially. The effect of the layer deposited at room temperature was investigated with regard to I-V characteristics and P-E hysteresis loop. In the case of the sample with the layer deposited at room temperature, both leakage current and dielectric constant were decreased. The thicker the layer deposited at room temperature was, the lower dielectric constant was. However, leakage current was indepenent of the variation of the thickness ratio. The sample with 200$\AA$ of the layer deposited at room temperature showed the most promising results in both dielectric constant and leakage current.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.201-204
• /
• 2009

$BaTiO_3/SrTiO_3$ and $PbTiO_3/PbZrO_3$ superlattice thin films were fabricated on $Pt/Ti/SiO_2/Si$ substrate by the pulsed laser deposition process. The morphologies and physical properties of deposited films were characterized by using X-ray diffractometer, HR-SEM, and Impedance Analyzer. XRD data and SEM images of the films indicate that each layer was well deposited alternatively in the superlattice structure. The dielectric constant of $BaTiO_3/SrTiO_3$ superlattice thin film was higher than that of individual $BaTiO_3$ or $SrTiO_3$ film. Same result was obtained in the $PbTiO_3/PbZrO_3$system. The dielectric constant of a superlattice film was getting higher as the number of layer is increased.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.313-313
• /
• 2010

$BiFeO_3$ (BFO), when forming a solid solution with $BaTiO_3$ (BTO), shows structural transformations over the entire compositional range, which not only gives a way to increase structural stability and electrical resistivity but also applies a means to have better ferromagnetic ordering. In this respect, we have prepared and studied 0.8 BFO-0.2 BTO thin films on Pt(111)/$TiO_2/SiO_2$/Si substrates by pulsed laser deposition. Various deposition parameters, such as deposition temperature and oxygen pressure, have been optimized to get better quality films. Based on the X-ray diffraction results, thin films were successfully deposited at the temperature of $700^{\circ}C$ and an oxygen partial pressure of 10mTorr and 330mTorr. The dielectric, ferroelectric, and magnetic properties have then been characterized. It was found that the films deposited under lower and higher oxygen pressure corresponded to lower leakage current. Magnetism measurement showed an induced ferromagnetism. The microstructures associated with the magnetic and dielectric properties of this mixed-perovskite solid solutions were observed by transmission electron microscopy, which revealed the existence of complicated ferroelectric domains, suggested that the weak spontaneous magnetization was closely associated with the decrease in the extent of rhombohedral distortion by a partial substitution of $BaTiO_3$ for $BiFeO_3$.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.13 no.2
• /
• pp.21-26
• /
• 1977

The author operated with a six seam trawl net by the stern trawler, No. 85 Parto, 499 GT, 2,200ps, in the Atlantic coast of Africa, from June, 1975 to October, 1977. In the term, towing speed and warp tension were determined, and trawling condition was observed. 1. The condition of trawling was good when the tension was less than 7.5ton. 2. 290 RPM, $13.5^{\circ}\;to\;13.8^{\circ}$ of pitch angle, and 3.5 to 4 knots of towing speed was considered as optimum for the trawler in the relation to the engine condition.

• Pediatric Infection and Vaccine
• /
• v.19 no.2
• /
• pp.55-60
• /
• 2012

Purpose: We conducted the immunoassay of pertussis according to ages, in order to evaluate protective immunity against pertussis in Korean populations. Methods: Healthy subjects were enrolled at four university hospitals in Korea. The subjects were grouped as seven age groups (every 10 years). Antibodies against pertussis toxin (PT) in sera were measured by enzyme linked immunosorbent assay (ELISA) kits. Geometric mean concentrations (GMC) of antibodies and the ratios of the subjects with seroprotective antibody levels were determined. The subjects with antibody titers ${\geq}24.0EU/mL$ were considered to seroprotective as the manufacturer's protocol. Results: Total 1,605 subjects (age: 2 months-65 years) participated in this study, and their GMC was $56.16{\pm}50.54EU/mL$. Among seven age groups, age group <11 year showed the highest GMC ($64.78{\pm}53.24EU/mL$) (P<0.001). In the analysis of the ratios of the subjects with seroprotective antibody titers, 68.2% of the subjects were proven to seroprotective, and age group <11 year also showed the highest ratio (76.5%) (P<0.001). Conclusions: We found that adolescences or adults (age group ${\geq}11$ year) showed lower levels of antibody against pertussis and lower ratio of the subjects with seroprotective antibody titers than children (age group <11 year).

• The Korean Journal of Food And Nutrition
• /
• v.13 no.4
• /
• pp.334-341
• /
• 2000

The DMPT produced by marine algae is the main biogenic precursor of oceanic DMS. Also, DMPT is an efficient stimulant for growth, feeding, and body movement of fish and striped prawn, and appears to play a physiologic role as an osmoprotectant in algae. This study was focused on the extraction of dimethyl-$\beta$-propiothetin as bioactive substance from green seaweed. Identification and quantification of dimethyl-$\beta$-propiothetin were measured by headspace gas chromatography after conversion to dimethyl sulfide by treatment with saturated NaOH solution. Dimethyl-$\beta$-propiothetin was extracted through various processes(solvent extraction, ultrasonication, boiling and autoclaving) from Enteromorpha intesinalis. The content of dimethyl-$\beta$-propiothetin extracted by autoclaving treatment showed higher than those of various extraction methods. Dimethyl-$\beta$-propiothetin content in extract of Enteromorpha Enteromorpha was 311,200ng/g after autoclaving at 121$^{\circ}C$ for 60min. Dimethyl-$\beta$-propiothetin in extract of Enteromorpha intestinalis was comparatively stable under low temperature. The retentions of dimethyl-$\beta$-propiothetin content in extract of Enteromorpha intestinalis were 75.8 ~99.8% by incubation at 10~6$0^{\circ}C$ for 2 hours. Chemical decomposition of dimethyl-$\beta$-propiothetin was observed under laboratory conditions at pH values higher than 9.5.

• Applied Biological Chemistry
• /
• v.23 no.4
• /
• pp.228-241
• /
• 1980

The red ginseng extract and its components were investigated for their activation effects on the growth of Saccharomyces cerevisiae IAM and Saccharomyces formosensis No. 396 IAM. Changes in the number of cells, alcohol production, $CO_2$ evolution, pH and the rate of sugar consumption and of fermentation were compared during growth at $30^{\circ}C$ for 120 hours. The addition of ethanol extract and saponins from red ginseng were found to exihibite a significant increase in all physiological activaties of yeast, and its maximum activites were obtained at 1.5% ethanol extract concentration. The physiological effects of panaxadiol and panaxatriol, two major groups of saponin, were also compared to those of crude saponin and found that the former showed a small increase in physiological changes. However the difference was not significant. The overall contents of ginsenosides of ethanol extract and crude saponin during fermentation were not significantly affected by the growth of roasts, except a small increase in ginsenoside $-Rg_2$ and decrease in -Rd.

• Asian Journal of Atmospheric Environment
• /
• v.5 no.3
• /
• pp.146-151
• /
• 2011

1-Nitropyrene (1-NP), 2-NP and 2-nitrofluoranthene (2-NFR) are useful markers for studying the atmospheric behaviors of polycyclic aromatic hydrocarbons (PAHs) and nitropolycyclic aromatic hydrocarbons (NPAHs). However, present methods for measuring trace levels of these compounds are lesssensitive and laborious. Here we describe several improvements to a previously reported high-performance liquid chromatography-chemiluminescence detection system that allows it to determine trace levels of 1-, 2-NPs and 2-NFR. The proposed system was equipped with a reducer column packed with Pt/Rh instead of zinc whose life-time was limited. The combination of Cosmosil MS-II (monomeric ODS) and AR-II (polymeric ODS) columns was used instead of polymeric ODS columns as the separator column to improve the separation. An ethanol mixture with acetate buffer (pH 5.5) was used in place of an acetonitrile mixture with the same buffer to activate the reducer column. The same ethanol mixture was used as the mobile phase for the clean-up column. The switching time of the column switching valve was optimized to concentrate the amino-derivatives of above NPAHs quantitatively on the concentrator column. The concentrations of bis(2,4,6-trichlorophenly) oxalate and hydrogen peroxide in the chemiluminescence reagent solution were optimized to 0.4 mM and 30 mM, respectively, to increase the sensitivity. Under the above conditions, the detection limits (S/N=3) of 1-, 2-NPs and 2-NFR were 1 fmol (0.25 pg), 10 fmol (2.5 pg) and 4 fmol (1 pg), respectively. The proposed system was effectively used to determine trace levels of 1-, 2-NPs and 2-NFR in airborne particulates collected at Noto Peninsula. The atmospheric concentrations of 1-, 2-NPs and 2-NFR were not more than sub pg $m^{-3}$ levels. They were higher in winter (January) than in summer (July). In both seasons, the concentrations were in decreasing order, [2-NFR]>[1-NP]>[2-NP].

• Restorative Dentistry and Endodontics
• /
• v.26 no.5
• /
• pp.409-417
• /
• 2001

The purpose of this study was to investigate the influence of light irradiation over self-priming adhesive on dentin bonding. After acid etching the exposed dentin, a self-priming adhesive (Prime&Bond$^{\circledR}$NT dental adhesive system Dentsply DeTrey, GmbH, Konstanz, Germany) was applied and light irradiation was done for 20 sec with regular intensity (600 mW/$\textrm{cm}^2$) in group I and for 3 sec with ultra-high intensity (1930 mW/$\textrm{cm}^2$) in group III. No light irradiation was done over self-priming adhesive in groups II and IV. Composite resin was added on the self-priming adhesive and irradiated for 40 sec with regular intensity (600 mW/$\textrm{cm}^2$) in groups I and II and for 3 sec with ultra-high intensity (1930 mW/$\textrm{cm}^2$) in groups III and IV. To see the effect of light curing time on dentin bonding, another 3 group specimens were prepared. Without light-irradiation over self-priming adhesive, added composite resin was irradiated for 3, 6, or 12 sec with ultra-high intensity light. After bonded specimens were stored in 37$^{\circ}C$ distilled water for 24 hours, shear bond strength were measured using a universal testing machine (4202, Instron, Instron Co., U.S.A.) and fractured surfaces were examined under a stereomicroscope (SZ-PT Olympus, Japan). Statistical analysis were done with one-way, two-way ANOVA and chi-square test. The results were as follows : 1. The shear bond strengths from the groups irradiated over self-priming adhesive were significantly higher than those from the groups without irradiation (p<0.05). 2. There was no significant shear bond strength difference between regular intensity light irradiation groups and ultra-high intensity ones (p>0.05). 3. There was no significant shear bond strength difference among various irradiation time groups with ultra-high intensity ones (p>0.05). 4. In stereomicroscopic examination of fractured surfaces, adhesive-cohesive mixed failure mode was mostly seen in all groups, and there was no significant difference in failure mode among groups (p>0.05).