• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.4
• /
• pp.796-800
• /
• 2011

As the increasing integrity of VLSI, the BIST(Built-In Self Test) is used as an effective method to test chips. Generally the pseudo-random test pattern generation is used for BIST. But it requires too many test patterns when there exist random resistant faults. Therefore we propose a mixed test scheme which applies to the circuit under test, a deterministic test sequence followed by a pseudo-random one. This scheme allows the maximum fault coverage detection to be achieved, furthermore the silicon area overhead of the mixed hardware generator can be reduced.

• Journal of Astronomy and Space Sciences
• /
• v.38 no.3
• /
• pp.165-173
• /
• 2021

Apophis is a near-Earth object with a diameter of approximately 340 m, which will come closer to the Earth than a geostationary orbit in 2029, offering a unique opportunity for characterizing the object during the upcoming encounter. Therefore, Korea Astronomy and Space Science Institute has a plan to propose a space mission to explore the Apophis asteroid using scientific instruments such as a laser altimeter. In this study, we evaluate the performance metrics of a laser altimeter using a pseudorandom noise modulation technique for the Apophis mission, in terms of detection probability and ranging accuracy. The closed-form expression of detection probability is provided using the cross correlation between the received pulse trains and pseudo-random binary sequence. And the new ranging accuracy model using Gaussian error propagation is also derived by considering the sampling rate. The operation range is significantly limited by thermal noise rather than background noise, owing to not only the low power laser but also the avalanche photodiode in the analog mode operation. However, it is demonstrated from the numerical simulation that the laser altimeter can achieve the ranging performance required for a proximity operation mode, which employs commercially available components onboard CubeSat-scale satellites for optical communications.

• Journal of Biosystems Engineering
• /
• v.16 no.2
• /
• pp.111-117
• /
• 1991

An empirical model for diesel engine control was obtained using a system identification method. A pseudo-random binary sequence was used as an input signal. Spectral anaylsis was used to find the frequency response of system. Model parameters of transfer functions were obtained using nonlinear regression.

• Journal of Life Science
• /
• v.14 no.1
• /
• pp.32-37
• /
• 2004

A portion of ribosomal internal transcribed spacer (ITS) 2 was sequenced from the samples of Pseudo nitzschia (P. deticatissima, P. multiseries, P. pungens and P. subfraudulenta) to investigate the genetic characteristics by measuring tile magnitude of genetic diversity and the degree of similarity coefficient using random amplified polymorphic DNAs (RAPD)-PCR patterns. The phylogenetic trees inferred from the genetic distance analyses showed the placement of P. delicatissima formed a quite long distance from p. P. multiseries, P. pungens, and even P. subfraudulenta. The phylogenetic tree from RAPD patterns showed that P. multiseries and P. pungens had dissimilarity coefficient of 0.31, while P. delicatissima and three species of Pseudo-nitzschia had that of 0.81. It is likely thought that the genetic position of P. delicatissima formed far from P. multiseries, P. punges, and P. subfraudulenta. These results imply that ITS2 region is expected to support a useful molecular characters for recognizing at the species level and for even discriminating P. multiseries from P. pungens. RAPD method also will be used to differentiate the species of Pseudo-nitzschia in a short time.

• ETRI Journal
• /
• v.28 no.2
• /
• pp.250-252
• /
• 2006

In this letter, a discrete state, discrete time chaotic pseudo random number generator (CPRNG) is presented for stream ciphering of text, audio, or image data. The CPRNG is treated as a finite state machine, and its state is modulated according to the input bit sequence of the signal to be encrypted. The modulated state sequence obtained can be transmitted as a spread spectrum or encrypted data.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.1
• /
• pp.67-74
• /
• 2016

In this paper, we propose a watermarking technology for a mixed music. The mixed music means recreated music that contained a number of musics in one audio clip. Royalty associated with the audio content is typically imposed by the full audio content. However, the calculation of royalties gives rise to conflict between copyright holders and users in the mixed music because it uses not full audio content but a fraction of that. To solve the conflict related with the mixed music, we propose a audio watermarking technique that inserts different watermarks for each audio in the audio that make up the mixed music. The proposed watermarking scheme might have poor SNR (signal to noise ratio) to embed to each audio clip. To overcome poor SNR problem, we used inaudible pseudo random sequence which modifies typical pseudo random sequence to canonical signed digit (CSD) form. The proposed method verifies the performance by each watermark extraction and the time internal estimation valies from the mixed music.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.4
• /
• pp.21-29
• /
• 2001

We show that image make converts of multiplex resolution using wavelet transform algorithm. To evaluate the robustness. we have measured comparison or similarity using various sequences which is inserted important coefficient of middle frequency band. The wavelet transform is advantage that it has a special quality of frequency domain and a special quality of spatial domain. Watermark is used pseudo random number, gaussian sequence, chaos sequence and sobel sequence. As result of experiments, it is to certify that The chaos sequence similarity is higher than other sequence. So the chaos sequence will be used for watermark sequence.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.762-765
• /
• 2005

본 연구에서는 유도 진동기의 파워 스펙트럼의 확산을 위한 LF2470 DSP기반 Hybrid Random PWM을 제안하였다. 제안된 방법은 Lead-Lag 랜덤 비트를 발생하기 위한 PRBS (Pseudo-Random Binary Sequence)와 PRBS와 논리적 비교를 위한 삼각파 랜덤 캐리어로 이루어진다. 또한 DSP에 의하여 랜덤 수 및 PRBS 그리고 3상 기준 정현파를 실시간으로 발생하며, DSP외부의 주파수 변조기 MAX038에 의하여 랜덤 주파수의 캐리어를 발생한다. 본 연구의 타당성 검증을 위하여 제안된 기법을 3상 유도전동기 구동장치에 적용하였으며, 종전의 방법과 전압 및 전류 그리고 전동기 소음 스펙트럼을 비교 검토하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.12
• /
• pp.6161-6176
• /
• 2018

Pseudorandom numbers are useful in cryptographic operations for using as nonce, initial vector, secret key, etc. Security of the cryptosystem relies on the secret key parameters, so a good pseudorandom number is needed. In this paper, we have proposed a new approach for generation of pseudorandom number. This method uses the three dimensional combinational puzzle Rubik Cube for generation of random numbers. The number of possible combinations of the cube approximates to 43 quintillion. The large possible combination of the cube increases the complexity of brute force attack on the generator. The generator uses cryptographic hash function. Chaotic map is being employed for increasing random behavior. The pseudorandom sequence generated can be used for cryptographic applications. The generated sequences are tested for randomness using NIST Statistical Test Suite and other testing methods. The result of the tests and analysis proves that the generated sequences are random.

• Korean Journal of Optics and Photonics
• /
• v.30 no.4
• /
• pp.167-173
• /
• 2019

In this paper, we studied characteristics of stimulated Brillouin scattering (SBS) suppression in high-power fiber lasers by using apparatuses applying a temperature gradient (i.e. a step, a sine shape, and random temperature distribution) along the fiber. From the ytterbium-doped polarization-maintaining fiber master oscillator power amplifier built in house, we measured the back-reflection spectrum and power for each temperature gradient, showing that the step shape temperature distribution was the most effective way to suppress SBS. In addition, we investigated the interaction of pseudo-random binary sequence phase modulation conditions and temperature gradients for SBS suppression.