• Earthquakes and Structures
• /
• 제16권4호
• /
• pp.487-499
• /
• 2019

Energy-based seismic design of structures has gradually become prominent in today's structural engineering investigations because of being more rational and reliable when it is compared to traditional force-based and displacement-based methods. Energy-based approaches have widely taken place in many previous studies and investigations and undoubtedly, they are going to play more important role in future seismic design codes, too. This paper aims to compute the maximum earthquake energy input to elastic single-degree-of-freedom (SDOF) systems for selected real ground motion records. A data set containing 100 real ground motion records which have the same site soil profiles has been selected from Pacific Earthquake Research (PEER) database. Response time history (RTH) analyses have been conducted for elastic SDOF systems having a constant damping ratio and natural periods of 0.1 s to 3.0 s. Totally 3000 RTH analyses have been performed and the maximum mass normalized earthquake input energy values for all records have been computed. Previous researchers' approaches have been compared to the results of RTH analyses and an approach which considers the pseudo-spectral velocity with Arias Intensity has been proposed. Graphs of the maximum earthquake input energy versus the maximum pseudo-spectral velocity have been obtained. The results show that there is a good agreement between the maximum input energy demands of RTH analysis and the other approaches and the maximum earthquake input energy is a relatively stable response parameter to be used for further seismic design and evaluations.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회논문집(II)
• /
• pp.481-486
• /
• 1998

In this paper, elastic and inelastic behavior of exterior joint of moment-resisting R.C frame with non-seismic detail subjected to reversed cyclic lateral load such as earthquake excitations was investigated. 1/2-scals subassemblage exterior beam-column joint including slab was manufactured based on similitude law. Then, pseudo static test under the displacement control was performed. The results of 1)crack pattern and failure mode, 2)degradation stiffness and strength, energy dissipation capacity from load-displacement hysteresis curve, 3)strain of steel were analysed.

• KSTLE International Journal
• /
• 제1권1호
• /
• pp.48-51
• /
• 2000

Surface damage accumulation of alumina ceramics under the cyclic stress state was analyzed. The alternating stress state in repeat pass sliding contact was simulated by a synchronized biaxial (normal and tangential) repeated indentation technique. Wear debris formation mechanism through damage accumulation and fatigue grain failure in both alumina ceramic balls and flat disks was confirmed, and the contact induced surface degradation due to fatigue cracking accumulation was quantified by measuring vertical contact displacement. Variation of structural compliance (slope of load-displacement curve) of two contacting bodies was expressed as a variation of the apparent elastic property, called pseudo-elastic constant, of the contact system.

• Earthquakes and Structures
• /
• 제17권1호
• /
• pp.39-48
• /
• 2019

This paper presents an experimental study on a 1/2 scale steel frame with archaized-style under the pseudo-dynamic loading. Four seismic waves, including El Centro wave, Taft wave, Lanzhou wave and Wenchuan wave, were input during the test. The hysteresis characteristic, energy dissipation acceleration response, displacement response, strength, stiffness and strain were analyzed. Based on the experiment, the elastoplastic dynamic time-history analysis was carried out with the software ABAQUS. The stress distribution and failure mode were obtained. The results indicate that the steel frame with archaized-style was in elastic stage when the peak acceleration of input wave was no more than 400 gal. Under Wenchuan wave with peak acceleration of 620 gal, the steel frame enters into the elastoplastic stage, the maximum inter-story drift was 1/203 and the bearing capacity still tended to increase. During the loading process, Dou-Gong yielded first and played the role of the first seismic fortification line, and then beam ends and column bottom ends yielded in turn. The steel frame with archaized-style has good seismic performance and meets the seismic design requirement of Chinese code.

• 한국추진공학회지
• /
• 제17권2호
• /
• pp.57-62
• /
• 2013

고체추진제 내부의 균열은 연소면적을 증가시키기 때문에 과연소를 발생시키며 로켓의 기능을 상실하거나 파손되는 문제로 이어질 수 있다. 따라서 고체추진제의 설계에서 균열진전에 대한 저항력인 파괴인성의 평가가 요구된다. 하지만 고체추진제의 특성상 복잡하고 심한 비선형 거동을 나타내기 때문에 파괴인성을 측정하는 데에는 많은 어려움이 있다. 본 연구에서는 고체추진제를 선형점탄성 재료로 가정하여 파괴인성을 평가하였다. CCT(Center-cracked Tension) 시험편을 이용한 파괴인성시험을 수행하였으며 점탄성재료에서 나타나는 응력완화현상을 이용한 가상탄성변위를 계산하여 ASTM E399 규격을 통해 파괴인성을 평가하였다. 또한 파괴인성에 대한 시험온도, 시험 속도의 영향에 대한 결과를 고찰하였다.

• Steel and Composite Structures
• /
• 제39권3호
• /
• pp.337-352
• /
• 2021

The study presented experimental and numerical investigation on the seismic performance of steel reinforced concrete (SRC) L-shaped column- reinforced concrete (RC) beam joints. Various parameters described as steel configuration form, axial compressive ratio, loading angle, and the existence of slab were examined through 4 planar joints and 7 spatial joints. The characteristics of the load-displacement response included the bearing capacity, ductility, story drift ratio, energy-dissipating capacity, and stiffness degradation were analyzed. The results showed that shear failure and flexural failure in the beam tip were observed for planar joints and spatial joint, respectively. And RC joint with slab failed with the plastic hinge in the slab and bottom of the beam. The results indicated that hysteretic curves of spatial joints with solid-web steel were plumper than those with hollow-web specimens. The capacity of planar joints was higher than that of space joints, while the opposite was true for energy-dissipation capacity and ductility. The high compression ratio contributed to the increase in capacity and initial stiffness of the joint. The elastic and elastic-plastic story deformation capacity of L-shaped column frame joints satisfied the code requirement. A design formula of joint shear resistance based on the superposition theory and equilibrium plasticity truss model was proposed for engineering application.

• 대한기계학회논문집
• /
• 제12권1호
• /
• pp.123-130
• /
• 1988

본 연구에서는 비교적 데이터 처리속도가 빠른 80286계의 CPU를 사용한 16bit 퍼스널 컴퓨터를 이용하는 경우보다, 가격면에서는 훨씬 유리하면서도, 성능은 거의 뒤지지 않는 피로시험 자동화 및 피로거동 고정밀 측정을 위한 시스템을 완성하였다. 본 연구에서 사용한 방법 및 작성한 소프트웨어등은 사용시험기, 피로연구 대상등에 거의 관계없이 이용이 가능하나, 여기서는 편의상, 시험기로서는 폐루우프(closed-loop)유압서어보 피로시험기를 사용하였으며, 피로거동의 측정에 대해서는 주로 피로균열지전을 대상으로 하였다.

• International Journal of Concrete Structures and Materials
• /
• 제6권2호
• /
• pp.101-110
• /
• 2012

This paper focuses on the finite element (FE) response sensitivity and reliability analyses considering smooth constitutive material models. A reinforced concrete frame is modeled for FE sensitivity analysis followed by direct differentiation method under both static and dynamic load cases. Later, the reliability analysis is performed to predict the seismic behavior of the frame. Displacement sensitivity discontinuities are observed along the pseudo-time axis using non-smooth concrete and reinforcing steel model under quasi-static loading. However, the smooth materials show continuity in response sensitivity at elastic to plastic transition points. The normalized sensitivity results are also used to measure the relative importance of the material parameters on the structural responses. In FE reliability analysis, the influence of smoothness behavior of reinforcing steel is carefully noticed. More efficient and reasonable reliability estimation can be achieved by using smooth material model compare with bilinear material constitutive model.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권4호
• /
• pp.83-91
• /
• 2021

본 연구에서는 기존 철근콘크리트 (R/C) 구조체와 내진보강 부재의 접합부의 성능을 향상시키기 위해서 접합부에 탄성패드를 가지는 새로운 H형강 철골프레임 내부접합형 내진보강공법 (H-section Steel Frame with Elastic Pad, HSFEP)을 제안하였다. HSFEP 시스템은 필요 내진보강량 산정이 간편한 내력향상형 보강공법으로서, 전단파괴가 발생할 가능성이 매우 높은 비내진상세를 가지는 중·저층 R/C 건축물에 적합한 공법이다. 본 연구에서 제안한 HSFEP 내진보강공법의 유용성을 검증하기 위하여 비내진상세를 가지는 국내 R/C 건축물을 바탕으로 실물 2층 골조 실험체를 제작하여 유사동적실험을 수행하여 최대지진응답 하중 및 변위, 지진피해정도를 중심으로 내진보강효과를 검토하였다. 실험결과 본 연구에서 개발한 HSFEP 내부접합형 내진보강법은 접합부성능이 개선되었으며, 효과적으로 수평극한내력을 증진시킴과 동시에 대지진 입력 시에도 지진응답변위를 매우 효과적으로 억제시켰다.

• 한국지진공학회논문집
• /
• 제7권2호
• /
• pp.75-84
• /
• 2003

대부분의 구조물들은 강한 지진을 받을 경우, 비선형 거동의 변형이 예상된다. 구조물의 내진평가는 구조물에 가해진 지진력에 대한 변위요구와 같은 구조물의 성능평가를 필요로 한다. 여러 가지 비선형해석법 가운데 구조물의 내진역량을 계산하기 위한 가장 정확한 방법은 비선형 시각이력해석(NRHA)이긴 하나 많은 시간과 노력이 요구되고 있다. 따라서 구조물의 비선형 거동을 보다 간편하게 예측하기 위한 정확하고 실용적인 비선형 약산해석법에 관한 연구들이 활발히 진행되고 있다. 일부 약산적 방법 중 능력스펙트럼법(CSM)은 개념적으로는 간단하나 반복적인 계산과정과 함께 때로는 해가 없거나 중복적인 해를 갖는 약점을 갖고 있다. 본 연구에서는 강성골격곡선으로부터 산정한 구조물의 초기 탄성진동주기 T와 응답스펙트럼으로부터 산정한 비선형 유사가속도 h$_{y}$ /g 및 연성비 $\mu$를 사용하여, 반복적인 계산과정 없이 복합구조물의 내진성능을 평가하는 비선형 직접스펙트럼법(NDSM)을 고려한다. 다양한 지진과 복합구조물에 대한 NDSM의 신뢰성과 실용성을 비선형 시각이력해석(NRHA) 결과와 비교함으로써 검토하였다.