• 제목/요약/키워드: Pseudo static analysis

검색결과 107건 처리시간 0.022초

터널 갱구 2 Arch 굴착에 따른 안정성 해석 (Stability Analysis for Two Arch Excavation of a Tunnel Portal)

  • 이길재;유광호;박연준;채영수
    • 터널과지하공간
    • /
    • 제12권3호
    • /
    • pp.179-188
    • /
    • 2002
  • 본 연구는 한 경부 고속철도 터널의 NATM 굴착에 의한 2 arch 확공 굴착 시 발생되는 진동 및 응력의 변화가 터널 및 인근 사면에 미치는 영향을 사전에 파악하여 안정성을 검토하는 데에 그 목적이 있다. 지반물성치를 산정하기 위해 시추공 조사, TV검층 및 속도검층을 실시하였다. 2차원 해석을 통해 불확실한 지반의 물성을 변수로 간주하고 가능한 범위 내에서 해석을 수행함으로서 특정한 지반 물성이 입력 정수로서 결정되었다. 정적 및 발파 진동에 의한 준-정적(pseudo-static)안전율을 계산하였으며, 3차원 해석을 통해 터널굴착으로 인한 터널 및 터널 주변의 거동과 터널 지보재의 적정성 여부를 조사하였다.

Efficient seismic analysis of multi-story buildings

  • Lee, Dong Guen;Kim, Hee Cheul
    • Structural Engineering and Mechanics
    • /
    • 제4권5호
    • /
    • pp.497-511
    • /
    • 1996
  • The equivalent static force procedure and the response spectrum analysis method are widely used for seismic analyses of multi-story buildings. The equivalent static force procedure is one of the most simple but less accurate method in predicting possible seismic response of a structure. The response spectrum analysis method provides more accurate results while it takes much longer computational time. In the response spectrum method, dynamic response of a multi-story building is obtained by combining modal responses through a proper procedure such as SRSS or CQC method. Since all of the analysis results are expressed in absolute values, structural engineers have difficulties to combine them with the results obtained from the static analysis. Design automation is interrupted at this stage because of the difficulty in the decision of the most critical design load. Pseudo-dynamic analysis method proposed in this study provides more accurate seismic analysis results than those of the equivalent static force procedure since the dynamic characteristics of a structure is considered. And the proposed method has an advantage in combination of the analysis results due to gravity loads and seismic loads since the direction of the forces can be considered.

Pseudo-dynamic approach of seismic earth pressure behind cantilever retaining wall with inclined backfill surface

  • Giri, Debabrata
    • Geomechanics and Engineering
    • /
    • 제3권4호
    • /
    • pp.255-266
    • /
    • 2011
  • Knowledge of seismic earth pressure against rigid retaining wall is very important. Mononobe-Okabe method is commonly used, which considers pseudo-static approach. In this paper, the pseudo-dynamic method is used to compute the distribution of seismic earth pressure on a rigid cantilever retaining wall supporting dry cohesionless backfill. Planar rupture surface is considered in the analysis. Effect of various parameters like wall friction angle, soil friction angle, shear wave velocity, primary wave velocity, horizontal and vertical seismic accelerations on seismic earth pressure have been studied. Results are presented in terms of tabular and graphical non-dimensional form.

Stability analysis of a rock slope in Himalayas

  • Latha, Gali Madhavi;Garaga, Arunakumari
    • Geomechanics and Engineering
    • /
    • 제2권2호
    • /
    • pp.125-140
    • /
    • 2010
  • Slope stability analysis of the right abutment of a railway bridge proposed at about 350 m above the ground level, crossing a river and connecting two huge hillocks in the Himalayas, India is presented in this paper. The site is located in a highly active seismic zone. The rock slopes are intensely jointed and the joint spacing and orientation are varying at different locations. Static slope stability of the rock slope is studied using equivalent continuum approach through the most commonly used commercial numerical tools like FLAC and SLOPE/W of GEOSTUDIO. The factor of safety for the slope under static conditions was 1.88 and it was reduced by 46% with the application of earthquake loads in pseudo-static analysis. The results obtained from the slope stability analyses confirmed the global stability of the slope. However, it is very likely that there could be possibility of wedge failures at some of the pier locations. This paper also presents the results from kinematics of right abutment slope for the wedge failure analysis based on stereographic projections. Based on the kinematics, it is recommended to flatten the slope from 50o to 43o to avoid wedge failures at all pier locations.

1g 진동대 실험 및 등가정적해석을 이용한 억지말뚝의 사면안정 내진보강 효과 연구 (A Study on Seismic Retrofit Design of the Stabilized Piles by 1g Shaking Table Tests and Pseudo-static Analysis)

  • 한진태;조종석;유민택;이승현
    • 한국방재학회 논문집
    • /
    • 제11권2호
    • /
    • pp.93-101
    • /
    • 2011
  • 국토의 70% 이상이 산지인 국내 지형 조건에서 도로, 철도 등 크고 작은 건설 공사에서는 필연적으로 사면이 형성된다. 그러나, 최근 국내외적으로 빈번히 발생하는 지진에 대한 사면안정 보강공법에 대한 연구는 전무한 실정이다. 이에 본 연구에서는 1 g 진동대 실험 및 등가정적해석을 이용하여 사면의 내진 보강공법으로써 억지말뚝의 적용성을 평가하고, 억지말뚝이 적용된 사면 및 억지말뚝의 지진시 거동을 분석하였다. 1 g 진동대 실험 결과로부터, 억지말뚝 보강 사면의 지진시 사면파괴 억지효과를 검증하였으며, 등가정적해석을 통해 억지 말뚝을 사면 하부 또는 상부보다 사면 파괴면의 중앙부에 말뚝을 설치했을 때 사면파괴 억지효과가 가장 큼을 알 수 있었다. 또한, 말뚝이 사면 중앙부에 설치되었을 경우, 말뚝의 중심 간격에 따른 안전율 변화를 등가정적해석으로부터 분석하였다.

Investigation of Effect of Input Ground Motion on the Failure Surface of Mountain Slopes

  • Khalid, Muhammad Irslan;Pervaiz, Usman;Park, Duhee
    • 한국지반환경공학회 논문집
    • /
    • 제22권7호
    • /
    • pp.5-12
    • /
    • 2021
  • The reliable seismic stability evaluation of the natural slopes and geotechnical structures has become a critical factor of the design. Pseudo-static or permanent displacement methods are typically employed to evaluate the seismic slope performance. In both methods, the effect of input ground motion on the sliding surface is ignored, and failure surface from the limit equilibrium method is used. For the assessment of the seismic sensitivity of failure surface, two-dimensional non-linear finite element analyses are performed. The performance of the finite element model was validated against centrifuge measurements. A parametric study with a range of input ground motion was performed, and numerical results were used to assess the influence of ground motion characteristics on the sliding surface. Based on the results, it is demonstrated that the characteristics of input ground motion have a significant influence on the location of the seismically induce failure surface. In addition to dynamic analysis, pseudo-static analyses were performed to evaluate the discrepancy. It is observed that sliding surfaces developed from pseudo-static and dynamic analyses are different. The location of the failure surface change with the amplitude and Tm of motion. Therefore, it is recommended to determine failure surfaces from dynamic analysis

비선형 응답이력해석을 통한 사면의 동적 안전계수 계산 (Dynamic Factor of Safety Calculation of Slope by Nonlinear Response History Analysis)

  • 이용희;김학성;주영태;김대현;박헌준;박두희
    • 한국지반공학회논문집
    • /
    • 제37권9호
    • /
    • pp.5-12
    • /
    • 2021
  • 유사정적해석법은 실무에서 지진 시 사면의 안전계수를 구하기 위하여 널리 사용되고 있다. 반면에 동적해석은 지진 시 지반의 응력-변형관계를 가장 잘 모사할 수 있다는 장점에도 불구하고 설계기준에서 요구되는 안전계수를 산정하기 어려워 실무적으로 그 활용이 많지 않았다. 본 연구에서는 비선형 응답이력해석으로 사면의 동적 안전계수를 산정하는 기법을 구축하였다. 이 방법은 최대가속도를 인위적으로 조절해서 지진계수를 산정하는 유사정적해석법의 문제점을 극복하며 사면 고유의 증폭 특성을 고려할 수 있다. 제안된 방법은 단일 사면에 대해서 적용하였으며 해석 결과를 유사정적해석법과 비교하였다. 본 연구에서 사용한 사면 사례에서는 동적해석결과로부터 계산된 사면의 최소 안전계수는 유사정적해석결과와 유사하게 평가되었으며, 수평방향 지진계수와 활동 토체의 평균 가속도가 최대가 되는 시점에서 동적 안전계수는 최소가 됨을 확인하였다.

진동대시험에 근거한 댐의 내진설계시 해석 방법의 비교 (The Comparision of Analysis Methods in dynamic Design of Dam based on Shaking Table tests)

  • 황성춘;오병현
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 춘계학술대회논문집
    • /
    • pp.732-737
    • /
    • 2005
  • This paper performed pseudo static analysis and dynamic analysis for CFRD and evaluated reliability with the results of Shaking Table Test. The Seismic coefficient method, modified seismic coefficient method, Newmark method of Pseudo static analysis and frequency domain response analysis, time domain history analysis of dynamic analysis were used. The analysis results were differ between analysis method, but the trends of acceleration and displacement were good agreement with the results of shaking table test.

  • PDF

원전 기초지반의 내진안정성 평가절차 개발 (Development of Seismic Stability Evaluation Technology for Rock Foundation of Nuclear Power Plant)

  • 황성춘;장정범;이대수;김윤칠
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2005년도 학술발표회 논문집
    • /
    • pp.74-81
    • /
    • 2005
  • The purpose of this study is to suggest a proper analysis model that can evaluate seismic stability for local rock foundation of nuclear power plant. Sliding Analysis, Pseudo-static Analysis and Danamic Analysis methods are used for analysing NPP rock foundation with the conditions like acting directions of input earthquake, boundary conditions, width and depth of analysing model, and modeling methods of weakness fault zones. As the results of study, Pseudo-static Analysis for lateral roller and dynamic analysis for transfer boundary condition showed good results, and analysing ranges of width and depth were 5 times of structure width and over 2 times of structure depth.

  • PDF

초고층 빌딩과 인접 지하구조물의 SSI를 고려한 동적해석과 유사정적해석의 거동 비교 연구 (A comparative study on the behavior of dynamic analysis and pseudo-static analysis considering SSI of a tall building and an adjacent underground structure)

  • 유광호;김승진
    • 한국터널지하공간학회 논문집
    • /
    • 제20권4호
    • /
    • pp.671-686
    • /
    • 2018
  • 최근 경주, 포항 인근에서 지진이 발생하여 대도시의 초고층 빌딩과 그에 인접한 지하구조물의 내진해석에 대한 사회적 요구가 증가하고 있다. 그러나 기존에 수행되어 왔던 대부분 내진해석 연구는 초고층 빌딩과 지하구조물을 개별적으로 분석하여 구조물간 동적 상호거동 연구가 부족한 실정이다. 따라서 본 연구에서는 기반암과 표층으로 이루어진 지반에 건물과 인접 지하구조물이 설치된 복합지하시설물을 대상으로 지반과 구조물을 동시에 고려한 동적해석을 수행하였다. 특히 신뢰도를 높이기 위해 유사정적해석을 추가로 수행하여 동적해석 결과와 비교 분석하였다. 종합적으로 복합시설물에 대한 SSI 해석 시 인접 지하구조물을 고려하는 것이 보다 보수적인 방법이라고 결론 내렸다.