• 대한치과교정학회지
• /
• 제54권2호
• /
• pp.108-116
• /
• 2024

Objective: A three-dimensional-printed individual titanium plate was applied for maxillary protraction to eliminate side effects and obtain the maximum skeletal effect. This study aimed to explore the stress distribution characteristics of sutures during maxillary protraction using individual titanium plates in various directions and locations. Methods: A protraction force of 500 g per side was applied at forward and downward angles between 0° and 60° with respect to the Frankfort horizontal plane, after which the titanium plate was moved 2 and 4 mm upward and downward, respectively. Changes in sutures with multiple protraction directions and various miniplate heights were quantified to analyze their impact on the maxillofacial bone. Results: Protraction angle of 0-30° with respect to the Frankfort horizontal plane exhibited a tendency for counterclockwise rotation in the maxilla. At a 40° protraction angle, translational motion was observed in the maxilla, whereas protraction angles of 50-60° tended to induce clockwise rotation in the maxilla. Enhanced protraction efficiency at the lower edge of the pyriform aperture was associated with increased height of individual titanium plates. Conclusions: Various protraction directions are suitable for patients with different types of vertical bone surfaces. Furthermore, when the titanium plate was positioned lower, the protraction force exhibited an increase.

• 대한치과교정학회지
• /
• 제18권2호
• /
• pp.367-385
• /
• 1988

In case of skeletal Class III malocclusion with underdeveloped maxilla, the extraoral orthopedic force for the stimulation of maxillary growth or anterior reposition of the maxilla has been used clinically for the improvement of facial skeletal relationship. The purpose of this investigation was to examine the initial reaction of maxillofacial complex to the maxillary protraction by using extraoral orthopedic force. The dried human skull was used and this investigation was done by means of double exposure holographic interferometry. The protraction forces placed on the canine or the first molar were parallel, $10^{\circ}$ downward, $20^{\circ}$ downward to the occlusal plane. Fringe pattern of each protraction condition was compared and analized. The results were as follows: 1. Each maxillofacial bone displaced saparately. 2. More displacement was shown at the area of the teeth and the alveolar bone. 3. A counterclockwise rotation of the maxilla wa decreased by downward protraction and especially 20 degree downward protraction from the canine showed least rotation. 4. On the zygomatic arch, outward bend was observed and this effect was decreased by downward protraction. 5. On the zygomatic bone, the counter clockwise rotation was increased by the downward protraction. 6. When maxillary expansion was applied at the same time, outward and upward displacement with counterclockwise rotation was observed on the maxilla. 7. The lateral pterygoid plate of sphenoid bone was affected by maxillary protraction.

• 대한치과교정학회지
• /
• 제53권1호
• /
• pp.35-44
• /
• 2023

Objective: Surgically assisted maxillary protraction is an alternative protocol in severe Class III cases or after the adolescent growth spurt involving increased maxillary advancement. Correction of the maxillary deficiency has been suggested to improve pharyngeal airway dimensions. Therefore, this retrospective study aimed to analyze the airway changes cephalometrically following surgically assisted maxillary protraction with skeletal anchorage and Class III elastics. Methods: The study population consisted of 15 Class III patients treated with surgically assisted maxillary protraction combined with skeletal anchorage and Class III elastics (mean age: 12.9 ± 1.2 years). Growth changes were initially assessed for a mean of 5.5 ± 1.6 months prior to treatment. Airway and skeletal changes in the control (T0), pre-protraction (T1), post-protraction (T2), and follow-up (T3) periods were monitored and compared using lateral cephalometric radiographs. Statistical significance was set at p < 0.05. Results: The skeletal or airway parameters showed no statistically significant changes during the control period. Sella to nasion angle, N perpendicular to A, Point A to Point B angle, and Frankfort plane to mandibular plane angle increased significantly during the maxillary protraction period (p < 0.05), but no significant changes were observed in airway parameters (p > 0.05). No statistically significant changes were observed in the airway parameters in the follow-up period either. However, Sella to Gonion distance increased significantly (p < 0.05) during the follow-up period. Conclusions: No significant changes in pharyngeal airway parameters were found during the control, maxillary protraction, and follow-up periods. Moreover, the significant increases in the skeletal parameters during maxillary protraction were maintained in the long-term.

• 대한치과교정학회지
• /
• 제22권3호
• /
• pp.531-556
• /
• 1992

The majority of the commonly used protraction headgears for the protraction of small and/or retropositioned maxilla not allow a change in the point of force application or direction of the force delivery to attain predictable results because of the position of the upper and lower lips to avoid discomfort to the patient. The purpose of this study was to investigate the initial reaction of maxillofacial complex according to the change of force variables such as direction and point of force application with designing an antenna type-modified protraction head gear. A macerated human skull with well aligned upper teeth was used to experimental model and the investigation was done by double exposure holographic interferometry. Fringe patterns of each protraction conditions were compared and analized. The results were as follows. (Frontal view) 1. The Counterclockwise rotation of the maxilla was showed by parallel protraction to occlusal plane and the fringe was decreased in number as higher point of force application. 2. Generally, the number of fringe was increased in 500gm of protraction force than in 300gm. 3. When apply the protraction force to the maxilla with rapid palatal expansion, the direction of fringe patterns was differed from the protraction without expansion. 4. In most of cases, the counterclockwise rotation was decreased in case of the direction of the force is $20^{\circ}$ downward to occlusal plane compared to the parallel direction. 5. At the point of force application is 15mm above and the direction of force is 20 downward to occlusal plane , the translation of the maxillary complex was showed. (Lateral view) 6. The direction of fringe patterns of the facial bones were differed each other by the sutures, and showed almost parallel when apply the 300gm and 500gm of protraction force. 7. In case of rapid palatal expansion with protraction of the maxilla, the fringe patterns between the maxillary area and the area from the posterior of the maxillary first molar to the pterygomaxillary fissure were differed. In case without rapid palatal expansion, the changes of direction and point of the force application did not affect to the direction and the number of the fringe patterns.

• 대한구순구개열학회지
• /
• 제16권1호
• /
• pp.19-23
• /
• 2013

Maxilla protraction, orthopedic correction of deficient maxilla is necessary for treatment of most Class III growing patients. Protraction method has evolved from tooth-born appliance to miniplates on the maxilla, and from face mask to miniplates on the chin. By placing miniplates on the maxilla and the mandible and running elastics between them, we can minimize dentoalveolar relapse and maximize orthopedic change.

• 대한치과교정학회지
• /
• 제48권5호
• /
• pp.304-315
• /
• 2018

Objective: The purpose of this study was to analyze initial displacement and stress distribution of the maxillofacial complex during dentoskeletal maxillary protraction with various appliance designs placed on the palatal region by using three-dimensional finite element analysis. Methods: Six models of maxillary protraction were developed: conventional facemask (Type A), facemask with dentoskeletal hybrid anchorage (Type B), facemask with a palatal plate (Type C), intraoral traction using a Class III palatal plate (Type D), facemask with a palatal plate combined with rapid maxillary expansion (RME; Type E), and Class III palatal plate intraoral traction with RME (Type F). In Types A, B, C, and D, maxillary protraction alone was performed, whereas in Types E and F, transverse expansion was performed simultaneously with maxillary protraction. Results: Type C displayed the greatest amount of anterior dentoskeletal displacement in the sagittal plane. Types A and B resulted in similar amounts of anterior displacement of all the maxillofacial landmarks. Type D showed little movement, but Type E with expansion and the palatal plate displayed a larger range of movement of the maxillofacial landmarks in all directions. Conclusions: The palatal plate served as an effective skeletal anchor for use with the facemask in maxillary protraction. In contrast, the intraoral use of Class III palatal plates showed minimal skeletal and dental effects in maxillary protraction. In addition, palatal expansion with the protraction force showed minimal effect on the forward movement of the maxillary complex.

• 대한치과의사협회지
• /
• 제57권11호
• /
• pp.654-663
• /
• 2019

This case report describes the management of a 30-year-old woman with hopeless mandibular first molars and right maxillary second premolar. The treatment plan included mandibular second and third molar protraction after extraction of mandibular first molars. Mini-implants were placed between roots of first and second premolar. Sliding mechanics with lever arm was used to prevent inclination of molars. A good functional occlusion was achieved in 38 months without clinically significant side effects. Most of the extraction space of mandibular first molar was closed by protraction of second and third molars. The skeletal Class II pattern was improved by counterclockwise rotation of mandible through reduction of wedge effect. Mandibular molar protraction with orthodontic mini-implants in adequate cases would be a great alternative to prosthetic implant and reduce the financial and surgical burden of patients.

• 대한치과교정학회지
• /
• 제32권6호
• /
• pp.425-434
• /
• 2002

이 연구의 목적은 유년기 건조 두개골에서 상악골 전방 견인 장치로 상악골의 저항중심을 지나는 힘을 가했을 때, 상악 골 복합체의 공간 변화를 평가하기 위함이다. 유치열기 혹은 초기 혼합 치열기로 추정되는 건조 두개골 4구를 사용하여 Delare의 facemask로 modified protraction headgear를 제작하였으며, 각각의 두개골에서 알지네이트 인상을 채득한 후 상악 스플린트를 제작하였다. 전방 견인력을 편측 당 1000gm씩 6시간 가하였다. 전방견인 전과 후 측모 두부방사선사진을 촬영하였으며 정확한 중첩이 가능하도록 1.5mm 길이의 $.017\times.025$TMA wire를 사용하여 9개의 reference marker를 두개골 우측에 위치 시켰다. 본 연구를 통해 상악골 전방 견인시 상악골 복합체의 전방 이동과 더불어 수직적 변화를 관찰할 수 있었으며, protraction headgear의 주된 효과는 상악골의 반시계 방향의 회전, 즉 구개상악부(palatomaxillary region)의 전하방 경사 이동에 의한 것임을 알 수 있었다.

• 대한치과교정학회지
• /
• 제37권1호통권120호
• /
• pp.73-84
• /
• 2007

상악 전방견인 장치는 골격성 III급 부정교합 특히 상악골 열성장 치료를 위해 널리 사용되고있다. 이 경우 증례에 따라 치아 치조성 이동을 허용하는 다양한 치료목표가 설정될 수 있으나, 상악골의 순수한 전방이동이 필요한 경우 다양한 구내장치를 이용하여 고정원 보강을 시도함에도 불구하고 고정원의 치아 치조성 이동을 피하기 어려운 경우가 발생된다. 이는 치아를 고정 원으로 이용하는 경우 골개조(remodeling)가 상악복합체 뿐만 아니라 치주인대에서도 발생되기 때문이다. 특히 이러한 부작용은 역동적인 치열 교환이 일어나서 치성고정원이 부족한 혼합치열기 또는 비교적 늦은 나이에 악정형 치료가 시행되는 경우에 많이 발생되게 된다. 이와 같은 부작용을 방지하기 위해 임플란트의 사용이나 피질골절단술, 신연골형성술 등의 외과적 방법을 응용하여 전방견인을 시도할 수 있으나 본고에서는 악정형적 효과를 극대화하기 위한 새로운 대안으로 골 고정원 (skeletal anchorage)을 이용한 상악 전방견인 치료의 외과적 교정적 치료 술식을 증례를 통해 소개하고자 한다.

• 한국운동역학회지
• /
• 제22권2호
• /
• pp.193-199
• /
• 2012

The purpose of this study was to investigate the activities of the serratus anterior (SA) and upper trapezius (UT) muscles during scapular protraction exercise with a dumbbell. Twenty-one healthy subjects with no medial history of shoulder pain or upper extremity disorders were recruited for this study. Subjects performed scapular protraction at $90^{\circ}$ and $130^{\circ}$ shoulder flexion with a dumbbell in supine and standing positions. The activities of the SA and UT were measured via surface electromyography (EMG) during 4 scapular protraction exercises. A 2 (angle) ${\times}$ 2 (position) repeated-measures analysis of variance (ANOVA) was used to compare the normalized activities of the SA and UT and the UT/SA ratio. The results showed that activities of both the SA and UT were the highest for the scapular protraction exercise at $130^{\circ}$ shoulder flexion in the standing position. However, the UT/SA ratio was the lowest for the exercise at $90^{\circ}$ shoulder flexion in supine position. Therefore, for selective activation of the SA muscle, we recommend performing the scapular protraction exercise with a dumbbell in the supine position at $90^{\circ}$ shoulder flexion.