• 대한기계학회논문집B
• /
• 제30권1호
• /
• pp.16-23
• /
• 2006

The present study aims at establishing the design procedure of regenerative pumps. It is based on the new momentum exchange theory proposed in Yoo, Park and Chung. Salient feature of the present design procedure is that it does not require input of any kinds of empirical design data. Using the design procedure, a prototype regenerative pump has been designed and manufactured to confirm its validity. Comparison between the predicted performance and the experimental measurement reveals that the prototype pump has its maximum efficiency at the design flow rate and that the proposed performance analysis method satisfactorily predicts the machine performance.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.894-899
• /
• 2008

Measured sensor datum from a quadruped robotics is commonly used for recognizing physical environment information which controls the posture of robotics. We can advance the ambulation with this sensed information and need to synthesize various sensors for obtaining accurate data, but most of these sensors are expensive and require excessive load for the operation. Those defects can be serious problem when it comes to the prototype's practicality and mass production, and maintenance of the system. This paper suggests virtual sensor technology for avoiding previous defects and presents ways to apply a theory to a walking robotics through virtual sensor information which is trained with several kinds of actual sensor information from the prototype system; the general algorithm is initially based on the neural network theory of back propagation. In specific, we verified a possibility of replacing the virtual sensor with the actual one through a reaction force measurement experiment.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 1999년도 춘계학술발표논문집 논문집
• /
• pp.59-62
• /
• 1999

• Journal of Biosystems Engineering
• /
• 제29권1호
• /
• pp.9-20
• /
• 2004

On the basis of design theory of soil inversion, two types of moldboard plow with secondary soil mover was designed and constructed to invert furrow slice at same position with furrow bottom. A series of soil bin experiment was carried to investigate the performance of prototypes. First prototype of new concept plow showed two kinds of problems during the preliminary experiment. For the plowing depth of 6cut the prototype did not invert the furrow slice, instead it just cut furrow bottom and the furrow slice returned to the original position. For the plowing depth of 8cm, there was soil clogging problem at the rear part of plow. From the above results it was concluded that the first prototype can not be used for the inversion of furrow slice at same position with furrow bottom. Second prototype could invert furrow slice at the same position with furrow bottom, but the performance was affected by soil moisture content soil hardness and plowing speed very much. For the higher soil moisture content, for the higher soil hardness and higher plowing speed, the prototype showed higher soil inversion performance. For the second prototype the inversion ratio was almost 100%, inversion angle was in the range of 90 to 100 degree and side displacement was less than 4 cm. But the furrow slice was not continuous, it was cut in the length of 30 to 40 cm. The reason why the furrow slice was cut in that length is blamed for the design of moldboard surface. The specific draft of prototype was in the range of 37.24 kN/㎡ to 42.14 kN/㎡ this value is a little higher than that of the conventional plow, or from 30.38 kN/㎡ to 33.32 kN/㎡. But the difference was not so big. The inversion performance of the second prototype for the field experiment was much better than that of soil bin experiment due to the better soil and operational conditions. Sticky and compacted soil conditions, and higher plowing speed was suitable for the plowing operation of the second prototype

• 감성과학
• /
• 제5권1호
• /
• pp.49-60
• /
• 2002

The aims of the study are first, in other to meet the demand for a new product design process, to review the prototype theory and to find out the conceptual structure of product aesthetics, which is another properly thought to be as important as the typical pattern in an effort to patch up the theory second to help designers overcome the limits of idea generation and create consumer oriented designs with a high success rate by setting up a new product design process that is established through the application of the aesthetically influential factor 'proportion'based on the preceeding studies that tested product aesthetics measuring devices. In other words, this study tries to find out product categories, making use of the prototype theory to introduce an ideal proportion for product design, recognizing the importance of proportion by conducting product pattern analysis: to create a differentiated method that can product consumer oriented designs, even if it only manipulate proportion and to establish a new design process that can systematically explain the methodology for various form generation that applies proportion. This study reviews the theoretical aspects of concepts pertaining to the above … and, based on them, empirically tests them by patting to use the programs, for proportion manipulation. This study was conducted in the following way: To begin with, this study takes out proportion out of some aesthetically influential factors that has a great impact on the way consumers prefer certain product designs and tries to see how proportion affects the consumer preference when consumers select a product. In addition, we could analyze the difference between the ideal proportion that consumers prefer and the traditional golden proportion produced through theoretical studies. The correlations between preferred proportion and ideal proportion, and preferred proportion and golden proportion could be shown. In order that we may create form variations through more detailed proportion manipulation on the basis of the ideal proportion verified as preferable, we again applied the proportion factor to the process utilizing PDS(proportion Distortion System). In the way the restraint of form generation could be pursued. All in all, this study makes an attempt to set up a design process to create new product forms through the application of Proportion.

• 복식문화연구
• /
• 제18권3호
• /
• pp.488-498
• /
• 2010

This study was intended to develop a multi-purpose, multi-functional design for safety vest to enhance the safety and user's availability. With a limited scope to LED-applied safety vest, this study contemplates on the problems of safety vest on the market and directions for design development with a view to develop its prototype. This is a significant study because it has been conducted concerning a prototype, a cut above the study method of constructing a basic theory. For study method, theoretic considerations on LED and safety vest are followed by case study for LED-applied safety vest currently on the market to draw out problems. Then, solutions for problems with LED safety vest will be found, while planning for a design direction in consideration of safety, functionality and beauty. Scope of study was limited to cases of LED safety vests currently on sale online and offline, excluding cases of common-form luminosity such as HB luminous vest without LED. Accordingly, results of study will help develop the prototype for LED safety vest with an increase of the wearer's safety, and be used as a basic data for developing high-value-added fashion prodcts to meet his aesthetic sense and functionality. This study has limitations. Restricted scope for LED-applied safety vest should be extended to an outdoor wear in follow-up research for the foundation of higher value added.

• 한국주거학회논문집
• /
• 제11권3호
• /
• pp.9-18
• /
• 2000

The fuzzy theory is on the basis of understanding of the subjectivity and the ambiguity. The paradigm of the fuzzy theory is to explore a regularity from the subjectivity and the ambiguity. Nowadays, the fuzziness, the main concept of the fuzzy theory, is widely applied to a lot of fields as the theory which is positively accepted and actively interpreted. In the science, the fuzziness is officially called as multi-valence. On the other side, there exists the other theory called Han-ism which is presumed as a prototype of korean philosophy. The basic concept of the Han-ism - one, many, middle, same, about - includes the fuzziness. The purpose of this study is to unfold the interrelationship between the fuzzy theory and Han-ism, and furthermore, to interpretate the cultural phenomenon and architectural spaces in koreas traditional architecture with a viewpoint, the fuzziness of the Han-ism.

• 한국전기전자재료학회논문지
• /
• 제13권7호
• /
• pp.630-635
• /
• 2000

Superconducting power cable is one of the most promising energy application of high-T$\sub$2/ superconductor(HTS). Thus we investigated previously the electrical and mechanical characteristics on Bi-2223 Ag sheathed tape. And a prototype HTS cable have been designed constructed and tested. In case of 19-filament type transport losses agree with the results of norris theory(strip). The critical current of HTS cable(1, 19-filament) in LN$_2$was 116[A], 240[A] and degradation coefficient(k) was 0.71, 0.73 respectively. In case of 19-filament cable critical current was decreased because of mechanical strain at pitch. And AC loss of HTS cable(19-filament) was 0.7 [W/m] in 240[A] loading

• 한국통신학회논문지
• /
• 제18권4호
• /
• pp.499-508
• /
• 1993

이 논문에서 CATV 및 MATV시스템용으로 널리 쓰이는 전력분배기의 설계법과 주파수특성해석을 다루고 있다. 즉, 윌킨슨형 파워디바이더를 집중정수회로화하여 CATV주파수대에 적합한 2분배기의 설계법을 이론적으로 고찰하고, 주파수특성을 해석하고 있다. 윌킨슨형 파워디바이더의 분배특성을 향상시키기 위해 보상회로를 부가한 최적설계법을 제시하여 특성평가를 하였으며, 그 결과 특성이 크게 향상됨을 이론적인 고찰과 실험을 통하여 증명하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.211-214
• /
• 2002

Almost all buildings/infrastructures made of composite materials are fabricated without proper design. Unlike airplane or automobile parts, prototype test is impossible. One cannot destroy 10 story buildings or 100-meter long bridges. People try to build 100-story buildings or several thousand meter long bridges. In order to realize "composites in construction", the following subjects must be studied in detail, for his design. Concept optimization, Simple method of analysis, Folded plate theory, Size effects in failure, and Critical frequency. Unlike the design procedure with conventional materials, his design should include material design, selection of manufacturing methods, and quality control methods, in addition to the fabrication method. In this paper, concept optimization and folded plate theory are presented for practicing engineers.engineers.