• Journal of Korean Society of Forest Science
• /
• v.99 no.3
• /
• pp.337-343
• /
• 2010

The purpose of this study was to understand water stress development in pine seedlings inoculated with Bursaphelenchus xylophilus. Leaf water potentials of four years old Pinus densiflora seedlings inoculated with the nematode were measured with a plant moisture system at predawn and midday. The midday leaf water potentials on the 35th day after the inoculation were -1.04 MPa in the infected seedlings, while -0.94 MPa in the non-infected seedlings. The predawn water potentials on the 56th day were -0.71 MPa in the infected, while -0.26 MPa in the non-infected. At this time the leaves of the infected seedlings became yellow and resin did not exude on the cut basal stem. Density of the nematode was maximum on the 28th day, but dropped sharply on the 68th day. The phloem and pith tissues became brown and the resin exudation reduced in the infected seedlings. In conclusion, pinewood nematode inoculation developed water stress in pine seedlings in a month.

• Journal of Arbitration Studies
• /
• v.13 no.1
• /
• pp.245-283
• /
• 2003

Since enactment of the Product Liability Act(PLA) on July 2002, Enterprises in Korea should be insured the Product Liability under the Act. Therefore they had to make a special team and organize it to match with the Act. However, some enterprises didn't follow and prepare the team for the dispute resolution. For example, in America, many enterprises had been attacked the PLA and in Japan, as well. but Korea is rare for the PLA. Thus, this is to research the PLA for protecting the disputes. Upon this study, 1 would like to suggest some issues and a revision of the PLA. Those are the purpose of my research. In this study, it consists of 5 chapters for achieving the purpose of the research. Introduction of this study is mentioned in Chapter 1, and Chapter 2 is for outline of the PLA in Korea. At Chapter 3, the cases are analyzed in the disputes of importers to address important things we have to check. After the analysis, resolution methods in general on import practices are suggested at Chapter 4. Also, this study is summarized at Chapter 5 including further research. In this research, 1 find out complex of Product Liability insurance and issues related with PLA. For protecting the issues and disputes; importers should prepare a agreement of arbitration during the preparation of contracts. Nothing can be better than prevention on any disputes, but they can be happened sometimes without any intentions or by mistake. Solving these issues, the resolution methods of this research are the most valuable. The mediation and the negotiation do not force any legal matters. So, the dispute through them does not have a positive resolution, and the effectiveness of them is very low. Due to the resolution of issues, arbitration is a desirable resolution. In Korea, most people do not know about the arbitration due to the lack of understanding of arbitration. Currently arbitration related with Product Liability has not been followed up promptly because procedures and judgement from a court take for a long time. In sum, in order to solve the disputes properly, they should be supported by the arbitration system to concrete essential objectives, so to speak, protection of the victim and the improvement of arbitration. In addition, the systematic arrangements would be required to carry out all the methods above mentioned. Those are for manufacturers, importers, and customers for the dispute resolution.

• Korean Business Review
• /
• v.18 no.1
• /
• pp.59-79
• /
• 2005

recently, world is progressing large quantity consumption with continuous Innovation and economic growth and pollution is accelerated at these process. Increase of industry activity and service that is point of corporation activity is discharging environmental pollutants at whole process to manufacture of end product and exhaust process from acquisition of raw material for accompanied product production hereupon. At the same time, being promoting resources consumption by that use much raw material, As a result, is becoming obstacle factors in sustainable development. So, corporation's responsibility for environmental protection is emphasized. Corporation which must prepare in green round or environmental problems should consider environmental effects that is happened over whole life of products that include waste treatment after raw material acquisition and use as well as selling end product simply. A Life Cycle Assessment techniques is normalized and standardized in International Standard Organization for technical committee 207(TC 207) world widely, and effort to apply in corporation's activity because mastering LCA techniques in domestic several corporations is undergone actively. Coming into effect of Kyoto's Protocol and International Organization for Standard 14000 series revision are presenting new survival principle in competition between country or corporation. LCA technique may become very useful means to corporation which wish to attempt environment management in real condition that awareness for environment is important. Also, An LCA to each product is going to cause big effects in corporation's whole image as well as competitive power raising for single product. Therefore, this research wishes to examine some instances for the future competitive product development at the estimation of environmental friendliness using LCA techniques and more theoretical considerations of the LCA techniques that can dominate corporation's fate.

• Journal of Forest and Environmental Science
• /
• v.13 no.1
• /
• pp.51-56
• /
• 1997

Developmental characteristics and reproductive ability of Caloglyphus sp. were examined under the constant temperature conditions. This mites has five stages ; egg, larva, protonymph, deutonymph and adult. All active instars preyed on larvae of pine gall midge, Thecodiplosis japonensis Uchida et Inouye. The developmental period from the egg to the adult decreased with temperature increase at a range between $15^{\circ}C$ and $30^{\circ}C$. The threshold of temperature and the thermal constant for the development from the egg to the adult were $8.2^{\circ}C$ and 122.0 day-degrees, respectively. At $25^{\circ}C$, survival rate from egg to deutonymph was estimated as 66.4%, and longevity of the adult was 12.3 days for male and 10.0 days for female. After a preoviposition period of 1 and 2 days female laid an average of 360.6 eggs each, almost all during the first half of their life time. The value of the net reproduction(Ro), the mean length of a generation(T) and the intrinsic rate of natural increase($r_m$) were calculated as 101.1, 9.3 days and 0.494 per female per day, respectively.

• Korean Journal of Clinical Pharmacy
• /
• v.18 no.1
• /
• pp.38-44
• /
• 2008

Rebamipide, ($\pm$)-2-(4-chlorobenzoylamino)-3-[2(1H)-quinolinon-4-yl] propionic acid, is used for mucosal protection, healing of gastroduodenal ulcers, and treatment of gastritis. It works by enhancing mucosal defense, scavenging free radicals and temporarily activating genes encoding cyclooxygenase-2. The purpose of the present study was to evaluate the bioequivalence of two rebamipide tablets, $Mucosta^{(R)}$ (Korea Otsuca Pharmaceuticals Co., Ltd.) and Mustar (Korean Drug Co., Ltd.), according to the guidelines of the Korea Food and Drug Administration (KFDA). The release of rebamipide from the two rebamipide formulations in vitro was tested using KP VIII Apparatus II method with pH 6.8 dissolution medium. Twenty six healthy male subjects, $23.46{\pm}2.63$ years in age and $66.62{\pm}8.97\;kg$ in body weight, were divided into two groups and a randomized $2{\times}2$ cross-over study was employed. After a single tablet containing 100 mg as rebamipide was orally administered, blood samples were taken at predetermined time intervals and the concentrations of rebamipide in serum were determined using HPLC with fluorescence detector. The dissolution profiles of two formulations were similar in the tested dissolution medium. The pharmacokinetic parameters such as $AUC_t$, $C_{max}$ and $T_{max}$ were calculated, and ANOVA test was utilized for the statistical analysis of the parameters using logarithmically transformed $AUC_t$, $C_{max}$ and untransformed $T_{max}$. The results showed that the differences between two formulations based on the reference drug, $Mucosta^{(R)}$ were -5.08, 3.52 and -9.71 % for $AUC_t$, $C_{max}$ and $T_{max}$, respectively. There were no sequence effects between two formulations in these parameters. The 90% confidence intervals using logarithmically transformed data were within the acceptance range of log 0.8 to log 1.25 (e.g., log 0.84$\sim$log 1.07 and log 0.90$\sim$log 1.17 for $AUC_t$ and $C_{max}$, respectively). Thus, the criteria of the KFDA bioequivalence guideline were satisfied, indicating Mustar tablet was bioequivalent to $Mucosta^{(R)}$ tablet.

• Journal of the Economic Geographical Society of Korea
• /
• v.19 no.2
• /
• pp.242-264
• /
• 2016

Tourism is a major sector of the national and regional economy in Southeast Asia endowed with rich natural environment and a variety of cultural and historical heritages. Tourism has been recognized as the industry without chimneys. However, as tourism sector is getting larger and being globally standardized, various problems such as environmental degradation as well as profits leakage from locals have been gradually aggravated. Against negative impacts from massive tourism various efforts have been tried and community-based ecotourism(CBET), seeking environmental conservation and community development at the same time, has emerged as a noteworthy alternative. By comparing the two cases of CBET in Indonesia and Cambodia, this paper aims to review the current status and future challenges of community development through ecotourism in Southeast Asia's rural villages. In the concrete, this paper analyses in-depth on case of JED(the village ecotourism network) in Bali, Indonesia and CBET project in Ramsar wetland reserves of Steung Treng province, Cambodia and founds out the possibility and main obstacles of community developmental strategy through CBET. Both cases have proven the positive outcomes in terms of environmental protection, local people's awareness improvement, and direct/indirect economic gain from CBET project. However, there are significant, but differentiated limitations in management capacities and stabilities of internal governance of two villages. Both villages are still in need of brisk networks with and assistance from the outside. In the conclusion part, this paper suggests CBET development program in Southeast Asia through Korea's social enterprises as one of the possible ODA programs(in tourism sector).

• Journal of the Korean Geosynthetics Society
• /
• v.1 no.1
• /
• pp.13-21
• /
• 2002

Geotextile tubes hydraulically or mechanically filled with dredged materials have been applied in hydraulic and coastal engineering in recent years(detached breakwater, groins and jetty). The geotextile tubes are made of sewn geosynthetics sheets. If the sandy soil is use to fill material, these inlets should be spaced closely to assure uniform filling of the tubes because sandy soil and geosynthetic is very pervious. However, the clayey soil or contaminated slurry is used, the inlets can be located relatively long distance. The fine clayey particles tend to rapidly blind the fabric slowing down water escape through the geotextile. This paper presents a field test result of a geotextile tube in the land reclamation project for the Songdo New City construction site. The dredged silty clay was dredged by the dredging ship and hydraulically pumped into the geotextile tube. The height of geotextile tube was measured at every filling stage and also measured width and diameter of geotextile tube with the elapsed time. Based on the test results, if the clayey filling material is used, the pumping step must be divided 3~4 stages for drainage and sediment. After complete drainage, the height of the geotextile tube reduces by approximately 50%.

• Journal of the Korean Society of Safety
• /
• v.24 no.6
• /
• pp.72-78
• /
• 2009

Exposure to HDI(hexamethylene di-isocyanate) commonly used in vehicle crash repair workshops remains a leading cause of occupational asthma. Although skin and eye contamination are considered as absorption routes, there are no occupational exposure standards for skin and ocular exposure. This is the reason why there are more empirical data should be provided. Therefore this study was to determine contamination levels of HDI on the skin, eyes, work surfaces, respirators and eye protectors. There was evidence of contamination on a variety of work surfaces, for example, door handles, bench top and spray gun, etc. A high proportion(47~80%) of skin wipe samples from neck, forehead, back hand, palm and wrist was positive for HDI contamination, even though spray time was relatively brief. The contamination levels from spraying inside spray booth were generally higher than outside booth due to poor work practices and inappropriate personal protective use like safety gloves. Apprentices had higher exposure levels than the qualified painters, likely due to lack of the recognition of safety and hygiene. The extent of contamination inside the PPE might provide an indication of the potential for respiratory & skin exposure and ocular exposure. Eye fluid samples from 4 out of 14 workers had the positive detection of HDI contamination, due to poor work practices like no or inappropriate eye protection. Considering the potential for dermal & ocular exposure to contribute to possible health symptoms including respiratory sensitization, the empirical data point to a need for improving work practices and appropriate PPE selection, use and maintenance.

• Korean Journal of Agricultural Science
• /
• v.39 no.4
• /
• pp.497-502
• /
• 2012

Since the year 2000, the production and consumption of broccoli have rapidly increased in Korea. And, the average production area and amount were about 1,700 ha and 29,000 ton for the past 5 years. Even with the increase of these cultivation and consumption, more than 95% of the broccoli seeds are currently imported from foreign countries such as Japan and Netherlands. Therefore, development of domestic broccoli varieties is needed to relieve Korean farmers' production cost for broccoli. In this situation, National Institute of Horticultural and Herbal Science (NIHHS) of Korea has tried to develop F1 hybrid varieties from elite lines that were obtained by microspore cultivation method from 2008. As the results, about 850 lines of broccoli were obtained and self-pollinated. Then their ploidy levels of the genome were confirmed to select double haploid (D.H.) lines. And the D.H. lines' horticultural traits were evaluated in open field. After the selection of 17 elite D.H. lines, they were cross-pollinated with a male sterile (MS) line to produce F1 hybrid seeds. After 2 to 3 years field trials of these F1 hybrid varieties at the area of Suwon, Gangneung, and Jeju respectively, two hybrid varieties such as 'Wongyo8011' and 'Wongyo8012' are selected for the application of variety protection. With these 4 years of research, we found that the microspore cultivation method is a powerful tool for the conventional breeding program, especially for the development of various inbred lines and even F1 hybrid varieties in short time.

• Asian Journal of Turfgrass Science
• /
• v.12 no.1
• /
• pp.49-78
• /
• 1998

Nowadays, there are increasing demands of golf courses and it is necessary to make more golf courses than the present. To do this, we need to improve the environmental problems with the regional inhabitants, and it is said that the first thing to be considered in developing any golf course in Korea is to preserve the environment. In this context, the purpose of this study is to set forth several design factors to lessen the negative impacts which are accompanied with the development of golf courses. 1. The present conditions of golf courses in Korea Many new golf courses have come into being, particularly since the late 1980s, and now, in the year of 1997, over one hundred of golf courses are doing their business, yet the number of golf course is still less than required. So far, over a half of them have been made in the vicinity of Seoul on account of various reasons, and this has adversely affected on our natural environment. This unreasonable development of golf courses has caused serious water pollution, landslides and the other problems. Also, the topography of Korea is not good for golf courses. Although the demands of golf courses are increasing, the suitable sites for them are very limited, and therefore it is sometimes unavoidable to make golf courses on steep hills. Consequently, in designing golf courses in Korea, the most important thing is the balance between natural environment and artificial environment. 2.Eco-friendly golf course design factors 1) The concept of eco-friendly golf courses Ecologically sustainable and sound golf courses which are made by eco-friendly approaches 2)Basic conditions of eco-friendly golf courses (1)The most suitable sites (2) Conservation of existing ground as much as possible (3)Proper use of agricultural chemicals which have great impacts on the environment (4) Reasonable use of fertilizers (5) Developing a specialized fertilizer only for grass (6) Adaptation of organic agriculture (7) Improvement of grass sorts (8) Establishing reservoirs for purifying the water from golf courses 3) Eco-friendly golf courses (1) Location-Enough area /Gentle slope/Winding ground/Including lakes or streams /Not crossing wind's main direction Facing south or southeast /Suitable soIl for grass /Good drainage /Low level of underground water (2)Course layout and design -Consideration about existing contours as much as possible -Adaptation of Scotish design trend -Various holes' configuration -Consideration toward surrounding landscapes -Reducing grass areas -Giving buffer zones -Adapting computer methods in the process of site analysis and design (3) Eco-friendly considerations in constructing and managing golf courses -Protection of wildlife -Reuse of existing forests and preservation of topsoil -Renovation of old-fashioned courses -Reducing grass areas -Purification of water -Standization of management -Strict regulations against chemicals -Recycling organic materials -Through separation of the water inside golf courses and out of bounds -Getting proper construction works done in a due time 4.Eco-friendly considerations from a viewpoint of cultural environment 1) Well-matched landscape design and events planning 2) Implement of identifications and awarding systerns 3)Acknowledgement of superintendents' qualitications in the maintenance of golf courses 4)Increasing public golf courses and keeping good relationships with the neighbors near golf courses Key words: Pro-environmental development, Golf course.