• Korean Security Journal
• /
• no.1
• /
• pp.263-281
• /
• 1997

The results of protection service could be different according to, first, the potential ability of protection personnel, second, the training degree and efficiency. Namely, it depends on how to control one's anxiety and tension In order to overcome the unsettled mental state and maximize the effect of the service, the level of anxiety of personnel should be measured and the cause of the anxiety should be found. And then complete training having the proper method of alleviating anxiety could be possible. When the method of alleviating anxiety is applied, one should attend the training with a positive mind to be able to perform one's duty successfully. And by adapting the same methode and procedure used to protection service to both mental process and every situation in the condition that strained muscles relax and all one's energies are concentrated, the same methods for reducing anxiety could be used at the same time. The effect of individual method might be varied according to the personal difference, so no one can say this or that method is more efficient than others. But what is important is to choose one method and adapt it which is most proper to oneself. To use the method of reducing anxiety efficiently needs a lot of time, so one should attend the training with patience.

• Fire Science and Engineering
• /
• v.22 no.5
• /
• pp.90-98
• /
• 2008

There are diverse barriers such as limits to space, time, economy, technology, institution, and etc. in remodeling construction compared to new construction and it needs to overcome such limits. Consequently, for effective performance of construction, planning and application fit for remodeling characteristics shall be made available in time and various studies into remodeling for each construction category are necessary to achieve this. Taking these into account this study conducted research of the followings to draw out necessary steps for planning and application of fire protection facilities in remodeling, to overcome various barriers that may arise during any project operations, and to provide useful materials for construction of reasonable and effective fire protection system.

• ETRI Journal
• /
• v.34 no.6
• /
• pp.816-826
• /
• 2012

Self-healing Ethernet rings show promise for realizing the SONET/SDH-grade resilience in Carrier Ethernet infrastructures. However, when a ring is faulty, high-priority protection messages are processed in less time than low-priority data frames are processed. In this situation, any delayed data frames either being queued or traveling through long ring spans will cause the ring nodes to generate incorrect forwarding information. As a result, the data frames spread in the wrong direction, causing the ring to become unstable. To solve this problem, we propose four schemes, that is, dual flush, flush delay timer setting, purge triggering, and priority setting, and evaluate their protection performance under various traffic conditions on a ring based on the Ethernet ring protection (ERP) method. In addition, we develop an absorbing Markov chain model of the ERP protocol to observe how traffic congestion can impact the protection performance of the proposed priority setting scheme. Based on our observations, we propose a more reliable priority setting scheme, which guarantees faultless protection, even in a congested ring.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2000.05a
• /
• pp.115-121
• /
• 2000

As the development of industry water quality of river is going to bad because of waste water of an industrial complex and general home agricultural chemicals exhaust of $SO_3$ and CO gas acid rain and so on. Corrosion damage of boiler factory equipment and so forth occur quickly due to using of the polluted water resulting in increasing leak accident. Especially working life of hot water boiler using the polluted water becomes more short and energy loss increases. The cathodic protection method is the most economical and reliable one to prevent corrosion damage of steel structures. Mg-base alloys galvanic anode protection of cathodic protection method is suitable for than application of hot water boiler using water with high specific resistance such as tap water. This paper is studied on the cathodic protection characteristics of how water boiler. In tap water and 0.001mol/$\ell$ NaCl solution the characteristics of anodic polarization of Mg-base alloys galvanic anode and tube material is investigated the measurement of cathodic protection potential according to the time elaspsed is carried out.

• Korea Trade Review
• /
• v.47 no.5
• /
• pp.201-221
• /
• 2022

This study aims to analyze a harmonious approach between trade norms for the protection of human rights and the WTO agreements is increasingly necessary and important. conflicts and harmonization that may occur between major human rights protection trade norms and WTO agreements were comprehensively reviewed. The hard legalization of corporate social responsibility for sustainable development, such as human rights protection, was in conflict with the WTO Agreement, which was based on the principle of non-discrimination. As the currently expanding human rights protection trade norms reflect differences in the positions of developed and developing countries, it was also pointed out that there may be disputes over WTO compatibility and distorted protectionism measures. Accordingly, the applicability of the general exceptions to Article 20 of the GATT were reviewed together, and Article 20(a) of GATT, "necessary to protect public morals" may differ between developed and developing countries, and thus limitations were also considered. At the same time, When it is necessary to take regulatory measures such as prohibition of imports from a specific country for human rights protection, it was reviewed and proposed domestic trade norms revision.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.1
• /
• pp.157-168
• /
• 2006

Recently, interest in using Al alloys in ship construction instead of fiber-reinforced plastic (FRP) has increased because of the advantages of A) alloy ships over FRP ships, including high speed, increased load capacity. and ease of recycling. This paper investigated the mechanical and electrochemical properties of Al alloys in a slow strain rate test under various potential conditions. These results will provide reference data for ship design by determining the optimum protection potential regarding hydrogen embrittlement and stress corrosion cracking. In general, Al and Al alloys do not corrode on formation of a film that has resistance to corrosion in neutral solutions. In seawater, however, $Cl^-$ ions lead to the formation and destruction of a Passive film. In a potentiostatic experiment. the current density after 1200 sec in the Potential range of $-0.68\~-1.5\;V$ was low. This low current density indicates the protection potential range. Elongation at an applied potential of 0 V was high in this SSRT. However, corrosion protection under these conditions is impossible because the mechanical properties are worse owing to decreased strength resulting from the active dissolution reaction in parallel parts of the specimen. A film composed of $CaCO_3\;and\;Mg(OH)_2$ confers corrosion resistance. However, at potentials below -1.6 V forms non-uniform electrodeposition coating, since there is too little time to form a coating. Therefore, we concluded that the mechanical properties are poor because the effect of hydrogen gas generation exceeds that of electrodeposition. Comparison of the maximum tensile strength, elongation, and time to fracture indicated that the optimum protection potential range was from -1.45 to -0.9 V (SSCE).

• Journal of Welding and Joining
• /
• v.19 no.2
• /
• pp.182-190
• /
• 2001

A marine structural material was well known to have high tensile strength, good weldability and proper corrosion resistance. Cu-containing high strength low alloy(HSLA) steel was recently developed for their purposes mentioned above. And the steel is free about preheating for welding, therefore it is reported that shipbuilding cost by using it can be saved more or less. However the marine structural materials like Cu-containing HSLA steel are being generally adopted with cathodic protection method in severe corrosive environment like natural sea water but the high strength steel may give rise to Hydrogen Embrittlement due to over protection at high cathodic current density for cathodic protection. In this study Cu-containing HSLA steel using well for marine atructure was investigated about the susceptibility of Hydrogen Embrittlement as functions of tensile strength, strain ratio, fracture time, and fracture mode, etc. and an optimum cathodic protection potential by slow strain rate test(SSRT) method as well as corrosion properties in natural sea water. And its corrosion resistance was superior to SS400 steel, but Hydrogen Embrittlement susceptibility of Cu-containing HSLA steel was higer than that of SS400 steel. However Hydrogen Embrittlement of its steel by SSRT method was showed with pheonomena such as decreasing of fracture time, strain ratio and fracture mode of QC(quasi-cleavage). Eventually it is suggested that an optimum cathodic protection potential not presenting Hydrogen Embrittlement of Cu-containing of HSLA steel by SSRT method was from-770mv(SCE) to - 900mV(SCE)under natural sea water.

• Journal of Chest Surgery
• /
• v.25 no.11
• /
• pp.1203-1208
• /
• 1992

Current methods of myocardial protection has been improved with cardioplegia and hypothermia. We compared St. Thomas hospital cardiopleic solution without oxygenation[Group I], with oxygenation[Group II] and with oxygenation with filter[Group III] under isolated working heart model. Heart rate recovery was more significantly improved in Group II than Group I after 15 minutes of recovery time [p<0.05]. Maximal systolic pressure shows no difference as it increases with time. Cardiac ouputs were not diffrent between groups. Recovery time was shorter significantly in group II and group III than group I [p<0.05] Use of filter showed no difference. As a conclusion, oxygenated cardioplegic solutions improves ability to protect the heart against ischemia and it is manifested by improved recovery time and heart rate.

• Journal of Chest Surgery
• /
• v.21 no.2
• /
• pp.203-210
• /
• 1988

The clinical experience with the activated clotting time[A.C.T.] for the control of heparin and protamine therapy during cardiopulmonary bypass in 40 patients between April, 1987 and September, 1987 is reviewed retrospectively. All of patients used with cold blood potassium cardioplegia for myocardial protection under standard cardiopulmonary bypass, priming and perfusate techniques respectively. This study was divided into 2 groups of patients followed by cardiopulmonary bypass time. Twenty patients, within 60 minutes of cardiopulmonary bypass time[group A] were compared with twenty patients, from 60 to 120 minutes of cardiopulmonary bypass time[group B]. Using blood cardioplegia for myocardial protection, Author observed wide variation of A.C.T. in individual response to initial heparinization[2mg /kg] and no requirement of additional heparin during cardiopulmonary bypass until 120 minutes. Total heparin amount during cardiopulmonary bypass was not related to body weight and body surface area in the both groups. After cardiopulmonary bypass, amounts of protamine for neutralization of heparin were more required in group B.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.6
• /
• pp.1166-1170
• /
• 2011

For developing the ignition device for the interceptor of Korean active protection system, the design parameters of the ignition device which should have a short ignition delay time and sufficient energy for propellant ignition were studied. The electric primer instead of mechanical primer was adopted for deceasing delay time, and ignition code was used for decreasing the time difference of flame propagation from the flame holes. The developed ignition device showed the ignition delay time of a few ms. When the designed ignition device was applied to the open-type propulsion devices, the stable interior ballistic characteristic was showed in a firing test.