• 예술인문사회 융합 멀티미디어 논문지
• /
• 제7권2호
• /
• pp.199-208
• /
• 2017

제4차 산업혁명의 주축으로 불리우고 있는 IoT, Cloud, Bigdata, Mobile, AI, 3D print 등의 기술들이 군에 접목되었을 경우 큰 변화가 생길것으로 예측할 수 있다. 특히, 전투라는 목적을 생각하였을 경우 그 중 IoT, Cloud, Bigdata, Mobile, AI 이 5가지 기술이 많은 역할을 할 것으로 생각된다. 따라서, 본 논문에서는 이 5가지 기술이 접목된 미래 군의 모습을 Smart Military라고 정의하고, 이에 따른 아키텍처를 정립하고, 적합한 정보보안 모델에 대해서 연구하였다. 이를 위해 IoT, Cloud, Bigdata, Mobile, AI와 관련된 기존 문헌들을 연구하여, 공통적인 요소를 도출하였으며, 이에 따른 아키텍처를 제시하였다. 제시된 아키텍처를 중심으로 Smart Military 환경에서의 정보보안을 전략적 정보보안과 전술적 정보보안으로 구분하고, 상기 구분된 정보보안 형태에 따라 취약성이 존재하더라도 감내할만한 수준의 경우를 고려하여 전략적 측면을 중심으로 정보보호체계를 구축한다면 효율적인 예산범위 내에서 최적의 정보보호 구축이 가능할 것으로 기대된다.

• 한국의류산업학회지
• /
• 제14권1호
• /
• pp.109-121
• /
• 2012

This study aims at developing ergonomics patterns for the sleeve of structural firefighting protective clothing through 3D motion analysis in order to ensure efficiency and safety of firefighters who are exposed to harmful environment at work. A new research pattern was developed by applying the total results of 3D motion analysis, changes of body surface length measurements, and 2D data on 3D body shape analysis on the size 3 patterns of the existing coat sleeve. For the sleeves, we used the body surface length of the range of shoulder's flexion and the joint angle of the range of wrist's ulnar deviation. And for the production of structural firefighting protective clothing using the research pattern, we recruited a recognized producer of structural firefighting protective clothing designated by KFI. Unlike everyday clothes, structural firefighting protective clothing should be able to fully protect the wearers from the harmful environment that threatens their lives and should not cause any restrictions on their movement. Therefore, the focus of research and development of such protective clothing should be placed on consistent development of new technologies and production methods that will provide protection and comfort for the wearer rather than production cost reduction or operational efficiency. This study is meaningful as it applied 3D motion analysis instead of the existing methods to develop the patterns. In particular, since 3D motion analysis enables the measurement of the range of motion, there should be continuous research on the development of ergonomics patterns that consider workers' range of motion.

• Structural Engineering and Mechanics
• /
• 제85권1호
• /
• pp.29-53
• /
• 2023

High-strength shielding concrete against gamma radiation is a priority for many medical and industrial facilities. This paper aimed to investigate the gamma-ray shielding properties of high-strength hematite concrete mixed with silica fume (SF) with nanoparticles of lead dioxide (PbO₂), tungsten oxide (WO₃), and bismuth oxide (Bi₂O₃). The effect of mixing steel fibres with the aforementioned binders was also investigated. The reference mixture was prepared for high-strength concrete (HSCC) containing 100% hematite coarse and fine aggregate. Thirteen mixtures containing 5% SF and nanoparticles of PbO₂, WO₃, and Bi₂O₃ (2%, 5%, and 7% of the cement mass, respectively) were prepared. Steel fibres were added at a volume ratio of 0.28% of the volume of concrete with 5% of nanoparticles. The slump test was conducted to workability of fresh concrete Unit weight water permeability, compressive strength, splitting tensile strength, flexural strength, and modulus of elasticity tests were conducted to assess concrete's engineering properties at 28 days. Gamma-ray radiation of 137Cs emits photons with an energy of 662 keV, and that of 60Co emits two photons with energies of 1173 and 1332 keV were applied on concrete specimens to assess radiation shielding properties. Nanoparticles partially replacing cement reduced slump in workability of fresh concrete. The compressive strength of mixtures, including nanoparticles was shown to be greater, achieving 94.5 MPa for the mixture consisting of 7.5 PbO2. In contrast, the mixture (5PbO₂-F) containing steel fibres achieved the highest values for splitting tensile, flexural strength, and modulus of elasticity (11.71, 15.97, and 42,840 MPa, respectively). High-strength shielded concrete (7.5PbO2) showed the best radiation protection. It also showed the minimum concrete thickness required to prevent the transmission of radiation.

• 한국포장학회지
• /
• 제11권1호
• /
• pp.17-24
• /
• 2005

During handling unitized products, they are subjected to a variety environmental hazards. Shock and vibration hazards are generally considered the most damaging of the environmental hazards on a product, and it may encounter while passing through the distribution environment. A major cause of shock damage to products is drops during manual handling. The increasing use of unitization on pallets has been resulted in a reduction in the manual handling of products and with it a reduction in the shock hazards. This has caused and increasing interest in research focused on vibration caused damage. the use of pallets as a base for unitizing loads, aids in the mechanical handling, transportation and storage of products. Besides aiding in the handling, transportation and storage of products, a pallet also acts on and interface between the packaged goods and the distribution environment. The determination of the impact deformation of the cushioning materials such as tray cup (polymeric foam) and corrugated fiberboard pad must be carried out to design the proper packaging system providing adequate protection for the fruit, and to understand the complex interaction between the components of fruit when they relate to expected transportation vibration inputs. In this study, the theoretical analysis of impact deformation for cushioning materials by dynamic vibration. The impact deformations of SW and DW corrugated fiberboard pad in acceleration amplitudes of 0.25 G-rms and 0.5 G-rms that were usually generated in transport vehicles during distribution environments were very small compare with the thickness of corrugated fiberboard pad. The maximum of vibration acceleration level of tray cup by vibration impact was about 3.2 G-rms. The theoretical allowable acceleration (G-factor) of the pear was 0.7102 G-rms, and the maximum dynamic deformation estimated within G-factor was about 1 mm.

• 한국포장학회지
• /
• 제25권3호
• /
• pp.125-130
• /
• 2019

Shock and vibration inputs are transmitted from the vehicle through the packaging to the fruit. Inside, these cause sustained bouncing of fruits against each other and container wall. These steady state vibration input may cause serous fruit injury, and this damage is particularly severe whenever the fruit inside the package is free to bounce, and is vibrated at its resonance frequency. The determination of the resonance frequencies of the fruit and vegetables may help the packaging designer to determine the proper packaging system providing adequate protection for the fruit, and to understand the complex interaction between the components of fruit when they relate to expected transportation vibration inputs. Instrumentation and technologies are described for determining the vibration response characteristics of the pears for exporting with frequency range from 10 to 200 Hz, sweep rate of 1 octave/min, sweep method of logarithmic up and down and acceleration levels of 0.2, 0.4, 0.6, 0.8 and 1.0 G considering the domestic transportation environment. The resonance frequency of the pears ranged from 49.04 to 87.16 Hz and the amplitude at resonance was between 0.96 and 4.02 G in test frequency band and acceleration level. The resonance frequency and amplitude at resonance frequency band of the pears decreased with the increase of the sample mass. The multiple nonlinear regression equations for predicting the resonance frequency of the pears were developed using the independent variables such as mass, input acceleration.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2016년도 학술발표회
• /
• pp.204-204
• /
• 2016

Thailand had set the National Water Management Strategy which covered main six areas in the next 12 years, i.e., by priority: (1) water for household, (2) water for agricultural and industrial production, (3) water for flood and drought management, (4) water for quality issue, (5) water from forest conservation and soil erosion protection, (6) water resources management. However due to the climate change impact, there is a question for all strategies is whether to complete this mission under future climate change. If the impact affects our target, we have to clarify how to mitigate or to adapt with it. Vulnerability assessment was conducted under the framework of ADB's (with the parameters of exposure, sensitivity and adaptive capacity) and the assessments were classified into groups due to their different characteristic and the framework of the National Water Management Strategy, i.e., water supply (rural and urban), water for development (agriculture and others), water disasters (floods (flash, overflow), drought, water quality). The assessments identified the parameters concerned and weight factors used for each groups via expert group discussions and by using GIS mapping technology, the vulnerability maps were produced. The maps were verified with present water situation data (floods, drought, water quality). From the analysis result of this water resources management strategy, we found that 30% of all projects face the big impacts, 40% with low impact, and 30% for no impact. It is clear that water-related agencies have to carefully take care approximately 70% of future projects to meet water resources management strategy. It is recommended that additional issues should be addressed to mitigate the impact from climate risk on water resource management of the country, i.e., water resources management under new risk based on development scenarios, relationship with area-based problems, priority definition by viewpoints of risk, vulnerability (impact and occurrence probability in past and future), water management system in emergency case and water reserve system, use of information, knowledge and technology in management, network cooperation and exchange of experiences, knowledge, technique for sustainable development with mitigation and adaptation, education and communication systems in risk, new impact, and emergency-reserve system. These issues will be described and discussed.

• 한국응용과학기술학회지
• /
• 제29권2호
• /
• pp.317-322
• /
• 2012

미세 조직은 SEM, FT-IR 스펙트라, 인장특성, 그리고 [NCO]/[OH]의 mole %, 입도분석에 의해 측정하였다. 친환경적인 NATM에 관한 관심이 고조됨에 따라 스테인레스같은 금속코팅에 더욱더 중요한 열경화 무용제 수지를 합성 하였다. 이 수지는 일반적 도료와 비교하여 매우 강도가 강하고 내구성이 매우 좋다. 폴리우레탄 수지는 폴리올, IPDI, 실리콘 계면활성제, 촉매, 충전제로 구성된다. 폴리우레탄 화합물은 가교제가 첨가된 수지가 가교제가 첨가되지 않은 수지보다 물성이 우수함을 나타냈다. 견고한 폴리우레탄 도료의 기계적 특성은 [NCO]/[OH]와 가교제가 증가함에 따라 강도가 증가하였다. 합성한 도료의 물성 향상은 스테인레스 산업뿐만 아니라 다양한 산업에서 폴리우레탄 고분자 수지가 강구조물의 보수보강에 많은 응용이 기대된다.

• 한국가스학회지
• /
• 제2권1호
• /
• pp.14-22
• /
• 1998

본 연구에서는 LNG 저장탱크에서 액면화재(pool fire) 발생시 복사열속(radiation flux)의 정량적인 예측과 복사열 피해를 줄이는 방법을 제안하기 위하여 RISC모델을 사용하여 여러 조건에서 복사열속을 계산하였다. 모델 예측결과 LNG 탱크의 액면화재에 의한 복사열 피해에 가장 큰 영향을 미치는 인자는 풍속임을 알 수 있었다. 화염과 피해 대상물사이의 복사피해 정도는 높은 풍속에서 보다 낮은 풍속에서의 풍속변화에 따라 크게 변하였다. 또한 액면화재 발생시 복사열 피해는 탱크 또는 공장 주위에 방풍시설을 함으로써 크게 줄일 수 있음을 알 수 있었다. 방풍시설은 다른 방법들 보다 경제적이기 때문에 냉각시설 및 소방시설과 연계하여 가스 저장탱크 주위에 설치하는 것이 바람직하다.

• 문화기술의 융합
• /
• 제9권3호
• /
• pp.707-714
• /
• 2023

제4차산업혁명의 기반이 되는 사물 인터넷이 많은 시스템에 응용되고 있으나, 사물인터넷과 연결되는 다양한 종류의 센서, 에지 노드, 등과 같은 하드웨어 구조에 적합한 저사양의 메모리, CPU 연산능력 및 경박단소한 센서노드 등으로 구성된다. 따라서, 기존의 보안 알고리즘으로 저용량의 노드에 사용할 수 없어, 새로운 제한된 하드웨어 구조 및 초경량의 암호 알고리즘이 요구되고 있다. 본 논문에서는 사물인터넷(IoT)에 연결된 스마트 홈 네트워크에서 야기될 수 있는 취약점 및 보안 문제점을 분석하고, 외부의 공격에 대한 다양한 종류의 보안 이슈 문제를 해결하기 위한 방법, 다양한 종류의 디바이스 보호를 위한 정합기술, 안전한 보안을 위한 IoT(Internet of Things)에서의 요구사항 및 응용 방법에 대해서 분석하였다.

• 정보화정책
• /
• 제27권2호
• /
• pp.3-19
• /
• 2020

인공지능과 블록체인은 4차산업혁명을 이끌어 갈 핵심기술로 각광을 받으며 발전하고 있다. 그러나 아직까지 인공지능은 데이터 확보 및 검증, 결과값에 대한 근거 설명 등에서 한계를 보이고 있고 블록체인 역시 과다한 에너지 소모, 데이터 관리의 유연성 부족 등이 확산을 저해하는 단점으로 꼽히고 있다. 이에 본 연구는 상호보완적인 성격을 지닌 인공지능과 블록체인의 기술 및 산업 동향과 한계점, 그리고 이를 극복하기 위한 기술융합 방안을 분석하고 정책 개선방안을 제시하였다. 구체적으로 혁신정책 관점을 적용해 연구개발(R&D) 강화 측면에서 1) 국가 차원의 중장기 인공지능/블록체인 융합 연구 추진, 2) 블록체인 기반 인공지능 데이터 플랫폼 구축, 혁신 생태계 조성 측면에서 3) 산업별 인공지능/블록체인 융합 응용 발굴 지원, 4) 인공지능/블록체인 융합 비즈니스 모델 개발 스타트업 지원, 법제도 개선 측면에서 5) 규제 샌드박스 확대 적용, 6) 개인정보보호 관련 규제 정비를 제안하였다.