• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.278-287
• /
• 2009

This thesis studied effect of zoning on seepage flow in concrete faced gravel-fill dam (CFGD) designed to have selected main rockfill or gravel-fill zone, Zone 3Bs with higher permeability to enhance the safety against accidental water infiltration into the dam. For this purpose, centrifuge model tests with two cases, with and without Zone 3Bs, were performed in order to investigate the necessity and the function of Zone 3Bs. Model dams were made by soil samples with modified coefficients of permeability and concrete faced slab was simulated with aluminum alloy. Water infiltration was simulated by rising water table over cracks on the facing. Behaviors of model dams were measured by LVDTs, strain gages, pore water pressures and cameras. Form the results of centrifuge tests, it was found out that the Zone 3Bs acts as a protection of main gravel-fill zone by inducing flow paths for infiltrated water into it as well as by draining off the infiltrated water out of the dam in a short time.

• 한국콘텐츠학회논문지
• /
• 제21권5호
• /
• pp.868-876
• /
• 2021

어린이 보호구역은 교통사고의 위험으로부터 어린이를 보호하기 위해 학교, 보육시설, 학원 등과 같은 시설 가운데 지정된 일정 구간을 말한다. 어린이 보호구역은 1995년 9월 제정된 이래, 2021년 1월까지 총 9번의 개정을 통해 강화가 됐음에도 어린이 보호구역 사고는 줄어들지 않고 있다. 본 논문은 방재디자인 기반의 어린이 보호구역 표준모델을 제시하고자 하였다. 연구의 방법으로는 문헌조사, 실증조사, 인식도 조사를 진행했다. 인식도 조사 대상은 어린이, 학부모, 운전자를 대상으로 조사를 진행하였다. 환경 조사 대상으로는 횡단보도, 자동차도로, 보행자도로, 신호등을 대상으로 조사하였다. 조사 결과 차량 운전자의 어린이 보호구역 시각적 인지가 어렵다는 점이 발견되었고, 보행자 도로를 이용하는 오토바이가 어린이에게 매우 위협적인 요소로 다가왔음을 알게 되었다. 이에 따라 방재디자인 중심의 개선된 어린이 보호구역 표준모델 디자인을 제시하였다.

• 국제지역연구
• /
• 제14권1호
• /
• pp.203-219
• /
• 2010

최근 글로벌 금융위기로 미 달러의 신인도 하락에 따른 환율의 불안정성은 많은 다른 국가들에게 경기침체와 교역 감소 등 많은 경제적 피해를 주고 있다. 하지만 유로화를 사용하고 있는 유로존(eurozone) 회원국들은 제2위의 기축통화국에 따른 유로존 우산효과로 경제적 손실이 비교적 작았다. 이런 이유로 1999년 1월 12개국으로 출범한 유로존은 2009년 슬로바키아의 가입과 함께 덴마크, 스웨덴, 영국 등이 회원국 가입을 희망하고 있고 갈수록 확대될 전망이다. 국가들 간 통화통합에 따른 단일통화 사용은 동종 상품의 가격비교가 용의해져 경쟁효과 발생에 따른 소비자의 후생증진이 이루어진다. 또한 통화교환비용과 환리스크 제거로 국가 간 교역의 역기능적 요소가 사라져 교역 증대가 이루어진다. 따라서 유럽 국가들이 유로화 도입으로 어느 정도의 교역효과가 유발되는지 분석해 보기 위해 임의효과모형(random effect estimation)과 고정효과모형(fixed effect estimation)을 사용하였다.

• 한국건축시공학회지
• /
• 제14권5호
• /
• pp.397-405
• /
• 2014

극한 염해환경에서 철근보강 지오폴리머 시험체의 외부전원법 전기방식 특성을 평가를 위하여 일련의 촉진실험을 실시하였다. 동시에 같은 조건의 보통 시멘트 콘크리트도 제조하여 비교 검토하였다. 환경조건은 침지대, 간만대, 그리고 크랙을 상정하였다. 지오폴리머는 밀실한 재료적 특성에 기인한 열화인자 침투 저항 증대에 의해 자연전위 뿐만 아니라 촉진 종료 후의 부식면적에서도 상당히 우수한 방식 성능이 있는 것으로 밝혀졌으며 향후 제작 양생 등의 문제를 개선함으로써 해양구조물로써의 활용이 다양해질 것으로 기대된다.

• 수산해양기술연구
• /
• 제37권2호
• /
• pp.147-152
• /
• 2001

본 연구에서는 수도수 중에서 Mg합금유전양극에 의한 연강재 온수보일러의 음극방식특성을 연구한 결과 다음과 같은 결론을 얻었다. 1) 온수보일러 관체의 개로전위에서나 전위가 높은 구간에서 모재의 부식전류밀도가 용접부위의 부식전류밀도보다 더 적게 배류된다. 2) 주조된 표면 그대로의 Mg합금 유전양극의 전류밀도는 주조된 표면을 연마한 상태의 Mg합금 유전양극의 전류밀도보다 더 많이 배류된다. 3) Mg합금 유전양극으로부터 거리가 멀어질수록 연강재 온수보일러의 음극방식전위는 높게 나타나고, 음극방식시간이 경과하면서 방식전위는 높게 나타나다가 6-10일 이후부터 방식전위는 안정되고 있다.

• 무역상무연구
• /
• 제76권
• /
• pp.1-20
• /
• 2017

The industrial technology (including trade secrets), which is commonly understood as systematic and applied technical knowledge, can be transferred to third parties by contracting for the transfer of technology or by granting of a licence. The activity of industrial espionage, due to the gradual increase of the economic interests of intellectual property, is displaying intensively in order to gain advanced technology information. With our outstanding high technology, but compared to the level of the advanced countries, the technical protection systems, the legal protection measures and the systematic management thereof may still be insufficient. Our industrial technology outflow abroad, due to the vulnerability to the security control system in our country, has been increasing since the 2000. Computer software and SNS, such as smart devices, appear as a rapid change in the technical information environment. In order to minimize the dead zone of a new industrial security, the country's organic activity is being conducted. In 2006, Industrial Technology Outflow Prevention and Protection Law was enacted, which emphasized the responsibilities of the country. In this paper for the economic entity's efforts to prevent technology leakage oversea, I have looked to how the industrial technology can be protected in terms of national security and economic benefits of our enterprises. To solve the above-mentioned problems hereof, Korean government should willingly establish a reliable legal system for supporting to enterprise's operations, and Korean companies should autonomously introduce a synthetic technology protection system and incorporate the confidentiality clauses in an international transfer of technology agreement with third parties.

• 전기학회논문지
• /
• 제59권6호
• /
• pp.1053-1058
• /
• 2010

A large modern wind farm should satisfy the requirements for a grid and accomplish the optimization of the wind farm system. The wind farm intertie protection system should consider a Fault Ride-Through (FRT) requirement for more reliable protection. The wind farm should keep connected to the grid in the case of a grid fault whilst it should be isolated for an intertie fault. This paper proposes a distance relaying algorithm suitable for wind farm intertie protection considering the FRT requirement. The proposed algorithm estimates the impedance based on a differential equation method because the frequency of the voltage and current deviates the nominal frequency. The algorithm extends the reach of Zone 1 up to 100 % of the length of the intertie to implement the FRT requirement. To discriminate an intertie fault from a grid fault, the algorithm uses a voltage blocking scheme because the magnitude of the voltage at the relaying point for an intertie fault becomes less than that for a grid fault. The performance of the algorithm is verified using a PSCAD/EMTDC simulator under various fault conditions. The algorithm can discriminate successfully the intertie fault from grid fault and thus helps to implement the FRT requirement of a wind farm.

• 한국재난정보학회 논문집
• /
• 제6권2호
• /
• pp.67-85
• /
• 2010

The purpose of this consideration is to present fundamental data for understanding and development the historical approach of Korea Protection by re-examining Royal guarding system through the history in Early Chosun Dynasty. This paper initiated from this critical mind seeking to understand the changing phase of Korea Guarding system, and fundamentally to find the future-oriented ways for the Guarding system. The main materials of history in Early Chosun Dynasty were re-examined, investigated and analyzed and the main references are a code of laws and official as well as private documents such as Kukjo-Oreyeui. Guards system for Royal prince has been found in Byung-jeon of Kyungguk-daejon. he Guards organization has dual system, one was Gumgun which was a private military man and the other was Wuibyung which was a Central military man. On the contrary, central military man were normally protected the royale palaces, but when the King come and go they accompanied and protected the King in safety zone. But just in case they did a job as a member of capital protection military affairs. A question of finance was the reason why there had been dual protection system due to financial matter. If it increased number of man it would pay much money, therefore central military man who has no relevance to national finance were supplied as members of military affairs for the protection of king.

• Journal of Advanced Marine Engineering and Technology
• /
• 제9권2호
• /
• pp.126-142
• /
• 1985

The plane bending corrosiion fatigue test for the welded metal parats was performed in the air and in the natural sea water with and without applying cathodic protection. The specimens tested were the weld of SM41 steel plates, SM58 steel plates and of SM41 to SM58, which were all prepared by submerged arc welding. The main results obtained from the experiment are summarized as follows: (1) In case with SM41 and SM58 steel plates, lower value of impact strength, higher value of hardness and more noble electrode potential were observed in the welded metal part than in the HAZ and base metal. Also the lowest hardness zone in the HAZ was observed with SM58 which was not found with SM41. In case with weld specimen of SM41 to SM58, the impact strength and the electrode potential of the welded metal part showed again the lowest and most noble value but the hardness value was located between those of SM41 and SM58 base metal. (2) In the fatigue test, the specimens tested in the air and under the cathodic protection were both cracked in a purely mechanical mode, but the specimens tested without cathodic protection were cracked by the combination of mechanical fracture and electro-chemical corrosion. (3) The corrosion fatigue limit of the welded metal parts of the specimen was increased by the cathodic protection. As the protection potential was varied down to -800 mV vs. SCE the fatigue limit was increased to the value tested in the air, and the maximum fatigue limit appeared at the -1, 000 - -1, 200 mV vs. SCE. However, as the protection potential was further decreased below -1, 200 mV vs.SCE, the fatigue limit of weld of SM58 and of SM41-SM58 joining was decreased but the limit was almost constant in the case of weld of SM41. (4) It is suggested that when designing steel ship the corrosion fatigue limit of welded metal parts should be stressed as a designing strength of the structure of steel ship in addition to the conventional basis considering simply tensile strength of steel and safety factor.

• 법제연구
• /
• 제41호
• /
• pp.171-200
• /
• 2011

우리나라에서 서민취약계층의 보호는 현재 "국민기초생활보장법"이 주로 담당한다. 하지만 현행법은 소득과 재산, 부양의무자 등을 기준으로 절대적 빈곤층의 보호만을 고려하고 있기 때문에 서민취약계층의 보호에 미흡하다. 구체적으로 현행법은 상대적 빈곤선을 예정하고 있지 않아 서민취약계층의 경제적 수요를 보호하는데 한계가 있다. 또한 급여의 지급이 통합되어 지급되기 때문에 서민취약계층의 개별적인 사회적 수요를 보호하는 데 미흡하다. 그리고 부양의무자 기준이 너무 엄격하여 법적 보호를 받지 못하는 사각지대를 형성하는 주요원인이 되고 있다. 따라서 본 연구에서는 서민취약계층의 보호를 위한 발전방안으로 첫째, "국민기초생활보장법"상 최저생계비를 결정함에 있어 상대적 빈곤선의 개념을 도입할 것을 제안하였다. 둘째, 통합급여와 개별급여의 혼합방식을 채택하여, 서민취약계층의 사회적 수요에 유연하게 대처할 것을 제안하였다. 셋째, 부양의무자 기준이 실제 부양하고 있는지의 여부에 따라 판단되어야 할 것을 제안하였다.