• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.415-418
• /
• 2006

하이브리드 추진제는 연소 중 연료의 후퇴율 및 연소 면적의 변화로 인해 O/F비가 변화하므로 이로 인해 설계 및 해석에 어려움을 가지게 된다. 본 연구에서는 요구임무를 만족하는 하이브리드 로켓모터에 대한 설계를 수행하였다. 하이브리드 모터의 기초 설계를 실시하고 그 결과를 이용하여, 일정한 산화제 유량이 공급된다는 가정 하에, 연소 시 연소면적변화에 따른 O/F비 변화를 고려한 하이브리드 모터의 내탄도 해석을 실시하였으며, 그 결과를 이용하여 로켓의 외탄도 해석을 실시하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.419-422
• /
• 2006

Improvement of performance of sorbitol model rocket was studied. The rocket designed in this work was compared with the rocket manufactured previously with respect to the shape of body, grain of rocket motor, motor case and recovery system. From this comparative work, it is found that mass ratio is required to be increased and the rocket was designed under safety regulation.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.10a
• /
• pp.126-130
• /
• 2003

Hybrid rocket had many advantage with compared to solid and liquid rockets. In this study, lab-scale hybrid motor was designed and manufactured. And the methods of regression rate improvement were considered. Thrust was calculated with pressure of the combustion chamber and the regression rate was measured in low flow rate of oxidizer. Several problems and solutions of operating hybrid rocket was presented.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.262-265
• /
• 2003

This Study is focused on the instrumenting Hybrid Rocket Motor of ACPL at Konkuk University and researching combustion instability by measuring regression rate versus oxidizer mass flux. In the result of experiment, test fire was moderate and we could acquire data of pressure, thrust, and temperature of combustion chamber. In the future, studying unsteady change of regression rate and pressure characteristic analysis of combustion chamber through hundreds of experiments should be performed. furthermore, researching characteristic velocity by taking a measurement of combustion temperature will be inevitable.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.248-251
• /
• 2007

The blowdown oxidizer feeding system is effective in the respect of higher reliability by the small number of parts and the absence of additional pressurization tanks, but it also has the unfavorable disadvantage such as thrust variation during the operation. Thus, in order to understand the these performance characteristics inherent in the Hybrid Rocket Motor (HRM) with blowdown oxidizer feeding system, this study proposed the integrated mathematical model to describe physical phenomena in the following parts: the oxidizer tank, combustion chamber, fuel grain, nozzle and injector.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.1170-1175
• /
• 2005

This paper is analyzed the characteristic of multi-phase inverter for the electric propulsion system. Two BLDC motors with 3 and 7 phases are designed with these features in order to simulate the effect of increasing the number of phases. From the simulation results, the 7-phase given better performance in terms of torque pulsation. Also, the torque pulsation can be reduced further by increasing the number of phases.

• Journal of Magnetics
• /
• v.18 no.2
• /
• pp.212-215
• /
• 2013

This paper deals with torque harmonic characteristics and its reduction design of induction motors for electric vehicle (EV) propulsion. For calculating the stator harmonic flux of squirrel-cage induction motor, the numerical methods have been employed on the structural configuration design of stator and rotor teeth. In particular, torque ripples including spatial harmonics are obtained by Finite Element Method (FEM), and their individual harmonic components are identified with Fast Fourier Transform (FFT). In this paper, design modification on the teeth surface gives rise to the significant reduction of torque ripples including spatial torque harmonics, which have been obtained with FEM.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1484-1488
• /
• 2009

This paper analyzes the noise reduction of traction motor for rolling stock. Nowadays, rolling stock becomes a attractive transportation as a friendly environment transportation. And this paper showed that vibration noise of motor coil by inverter switching frequency. That noise has influence on passenger. It is important that noise reduction for passenger in the rolling stock. In this paper, it shows that effect of variable switching frequency of propulsion inverter for noise reduction.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.213-216
• /
• 2010

A typical unsteady internal ballistic analysis model was proposed to take account of the erosive burning for a solid rocket motor. The variance of local velocity and pressure along grain surface are analyzed by using the continuity and momentum equation. The model introduced in this study showed good agreements with the results of previous internal ballistics program. It was investigated that the change of combustion pressure, gas velocity and regrestion rate along the grain axis.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.205-209
• /
• 2010

The technology of production of the thermoplastic composite rocket propellants is based on a two-phase production procedure. The first phase represents the production of a semi-product in the sheet (foil) form (thickness: 0.5 mm ~ 5 mm), whereas the second phase is realized independently from the first one and it is based on the semi-produced product and thus the final form of the propellant grain is realized in relation to the defined geometry. Well done mechanical characteristics of the propellant grain enable that the same thing could be used as a mandrel in the filament winding procedure in creating the motor chamber of the composite material.