• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.5
• /
• pp.582-588
• /
• 2011

This study was aimed at the design of the dies for the unified shaft joint using the computer simulation to shorten the period of production, on the basis of the process planning which was designed by the field experts. In the computer simulation, 'Deform-3d' and 'Eesy-DieOpt' have been used, which are the commercial process analysis and die design program. Through the process analysis, we could know the propriety of the forming process, the inner pressure of the die and the suitable fitting pressure between the insert and the sleeve which was not showing any positive tangential stresses in the insert. Through the simulation of die design, we could know the number of the stress ring, the diameter ratios, the stresses of the die, the shrink fitting tolerance and temperature in the condition of the already determined maximum outer die diameter of the multi-stage former. The validity of the die design using the computer simulation was analyzed by the experiments and the results were satisfactory. As the results of this study, the new and easy die design system for multi-forging has been developed.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.2 no.2
• /
• pp.1-7
• /
• 2005

For the reliability evaluation of the track drive unit(TDU), firstly, we analyzed the major failure modes through FMEA(failure mode & effects analysis), FTA(failure tree analysis), and 2-stage QFD(quality function deployment), and then quantitatively determined the priority order of test items. The Minitab analysis was also performed for prediction of life distribution and parameters of TDU by use of field failure data collected from 430 excavators for two years. In addition, we converted the fluctuation load in field conditions into the equivalent load, and for evaluation of the accelerated lift by the cumulative fatigues, the equivalent load is again divided into the fluctuation load by reference of test time. And then, by use of the test method in this paper, the acceleration factor(AF) of needle bearing inside planetary gear which is the most weakly designed part of TDU is achieved as 5.3. This paper presents the quantitative selection method of test items for reliability evaluation, the determination method of the accelerated life test time, and the method of non-failure test time based on a few of samples. And, we proved the propriety of the proposed methods by experiments using a TDU for a 30 ton excavator.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.991-996
• /
• 2013

In this paper, the ultrasonic horn having the natural frequency with 60 [kHz] for the dissimilar material bonding of the glass and solder tried to be designed. The ultrasonic horn was designed through the relational formula including the aspect ratio of the input terminal and output terminal, length of the ultrasonic horn. The modal analysis was performed for the propriety analysis of the designed horn. The parameters and response was set through the basic experiment. The dissimilar material bonding strength analysis using the ultrasonic transducer was done. The optimal process parameters having maximum bonding strength was derived.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.6
• /
• pp.647-653
• /
• 2016

There are no ex-port evaluations for the propriety and efficiency of AtoNs considering risk elements and environmental changes after the opening of a port. It is necessary to develop objective indicators and evaluation models to fill this gap. This study establishes an efficiency analysis model for Aids to Navigation (ANEffic) focusing on manned lighthouse, which include 20 function indices. After running a function assessment, an Analytic Hierarchy Process (AHP) and Likert scale are used to address port operations, national policies and expert opinions. As the result of the assessment, Yeongdo, Gageodo, Geomundo and Jukbyun Lighthouses are highly regarded in the propriety and efficiency of AtoN. And Uleungdo, Gasado, Songdaemal and Ulgi Lighthouses need to review detailed evaluations. The ANEffic developed should be utilized as basic tool to collect data for efficient management and to re-arrange the policy decisions regarding AtoNs as appropriate.

• Journal of Sasang Constitutional Medicine
• /
• v.4 no.1
• /
• pp.107-148
• /
• 1992

The definitions of Four Constitution (Tae-Yang-In, So-Yang-In, Tae-Eum-In, So-Eum-In) in Four-Beginning-Theory (四端論) and Distribution-Theory (擴充論) were morphologically diagrammatized. the method of measuring the five parts came from the diagrams. The five parts are the followings; Top-Line is the distance between Rt. & Lt.Shoulders. Bosom-Line is the horizontal distance passing through the Rt. & Lt.nipples. Stomach-Line is the horizontal distance passing through the Rt. & Lt. acupuncture point Bool-Yong (不容穴). Navel-Line is the horizontal distance passing through the navel. Bottom-Line is the distance between the Rt.& Lt. anterior superior iliac spines. According to it, 311 people were measured in the clinic. Through the measured numerical values, to find out the objective propriety of the morphological diagrammings and the discriminating ability of Four Constitutions by the method of measuring the five, the author tried this study and got the following results. 1. On the ground of the Internal Organs-Theory (臟腑論), the definitions of Four Constitutions were classified and diagrammatized step by step and it was possible to draw the morphological graphs satisfying the reasonable condition objectively. 2. It was found that the graphings by Mean, Standard Deviation and 95% Confidence Interval for mean of the numerical values of five measured parts and the morphological diagrammings of the definitions in Four-Beginning Theory and Distribution-Theory drove to the same figures. 3. Through the method of the Analysis of variance and the Discriminant Analysis, it was discovered that the measured numerical values of five parts could distinguish the Four Constitutions. 4. Tae-Yang-In has the longest Top-Line and the shortest Bottom-Line. The Mean head of Confidence Interval from Top to Bottom is downwardly decreased at the rate of 3.7, 1.5, 1.8, 3.4. 5. So-Yang-In has the longest Top-Line and the shortest Bottom-Line. The Mean head of confidence Interval from Top to Bottom is downwardly decreased at the rate of 2.3, 1.5, 1.5, 1.1. 6. Tae-Eum-In has the longest Navel-Line. The Mean head of Confidence Interval from Navel to Top is upwardly decreased at the rate of 0.5, 0.4, 2.5 and downwardly decreased at the rate of 2.7 between Navel and Bottom. 7. So-Eum-In has the longest Bottom-Line. The Mean head of Confidence Interval from Bottom to Top is upwardly decreased at the rate of 1.1, 1.1, 1.8, 2.3. From the above findings, it was possible to draw the morphological graphings satisfying the objectively reasonable conditions in the definitions of Four-Beginning-Theory and Distribution-Theory and it was proved that the results of the Positive Analysis, carried with the measured numerical values of five parts from the diagramming, could show the objective propriety of the morphological graphings and the discerning ability of Four Constitutions by the method of measuring the five parts.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.329-334
• /
• 2003

The aim of this study is propriety review for underground facility surveying on development area of land for housing and efficient management. Because of integration information administration system construction of the nation and development of information technology, construction of Urban information system(UIS) to manage systematically city space is increasingly necessary We manage systematically attribute information for each lot in the development area of land lot housing that it Is connected with NGIS in order to drive gradual computerization of underground facilities and arrange the base of facility management. Review arrangement methods on development area of land for housing makes it to check safety accident of urban and to leading base of urban information. Thus, this study draw the most suitable way through analysis of driving methods and expectation effect from above facts.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.1
• /
• pp.104-114
• /
• 2006

Recently, the PPP (Public-Private-Participate) program on water and wastewater services in Korea has been under an active debate. However, the controversy has reached the limits of getting more valuable implications from past foreign experience beyond conceptual and/or qualitative case studies. This paper analyze scientifically and quantitatively the Buenos Aires Water Concession Project focused on propriety of the contract using system dynamics modeling. The results show that Buenos Aires's Project has several problems in the contract phase even though Argentina government spent much time to design it. Analysis results suggest that estimation of K factor considering delay effect and future uncertainty, reduction of the first fixed terms of contract, etc., are needed for a proper contract.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2007-2009
• /
• 1997

This paper proposes the LCC type high frequency resonant DC-DC converter using Power MOSFET as switching devices, and describes the characteristics and operating principles. LCC converter has the resonant capacitor instead of a source decoupling capacitor in the conventional half bridge parallel resonant converter. We performed an experiment to prove the propriety of proposed converter.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.133-140
• /
• 2000

Drilling and blasting method for excavating rock mass is generally used in underground construction; but this technique has some shortcomings. For instance, rock mass damage is inevitable during drilling and blasting, and blast-induced vibration frequently causes some problems. Until now, field measurement method is used to predict the overbreak and vibration; but it has many limitations. Therefore, numerical analysis method is needed to overcome such limitations, and to estimate and predict damage and vibration due to tunnel blasting in the design stage. In this study, damage zone of rock mass due to stoping and contour blasting is compared based on standard tunnel blasting pattern, and the propriety of the standard tunnel blasting pattern is estimated. Then, blasting pattern is optimized so that the damage zone due to sloping blasting with reduced charge is consistent with that due to contour blasting.

• Journal of the Korean housing association
• /
• v.13 no.2
• /
• pp.55-64
• /
• 2002

This study aims at the suggestion of possibility that a housing density will maintain properly and that an ecological hill housing will recover a rapport with the ground. That is, both residential planning on the hillside and ecological architecture as a concept for development are chosen for study category, and relationship between the hillside and the hill housing is theorized and then propriety is analysed through application of the ecological planning elements. The results of this study are as follows: 1. Now that the hillside is regarded as an idle land that preserves natural environment and maintains ecosystem, it must be developed on the basis of awareness that nature and human beings exist together. 2. Analysis of geographical factors must be advanced because it is inevitable that the development of the hill housing should be performed properly to the geographical characteristics. 3. Planning elements of ecological residential block which are possible for constructing on the hillside can be developed and applied, on the basis of geographical characteristics, by classifying them into two areas; housing estate, building and unit.