• 한국멀티미디어학회논문지
• /
• 제15권1호
• /
• pp.148-165
• /
• 2012

가상목업을 이용한 정비 시뮬레이션을 제품 설계 단계에 적용함으로써 시제품 제작 전 정비성을 검증할 수 있고, 제품 개발 비용을 절감할 것으로 기대되고 있다. 정비 시뮬레이션 결과는 정비 매뉴얼 컨텐츠로 재사용하거나 RAM (Reliability, Availability, Maintainability) 분석 자료로 활용할 수 있다. 가상 환경에서 설계 타당성을 검증하기 위해 정비 시뮬레이션은 가상 제품의 물리특성, 부품의 조립관계, 조작 과정을 실제 환경과 유사하게 제공해야 한다. 시뮬레이션 시스템은 협업 정비 절차를 수행하기 위해 가상 협업 환경으로 확장되어야 한다. 본 논문은 현재 알려진 정비 시뮬레이션을 가상 협업 환경으로 확장하기 위한 3계층 시스템 구조와 물리모의 기반 협업 인터렉션 기술을 제안한다. 제안된 협업 정비 시뮬레이션 시스템은 가상목업 정비 시뮬레이션 시스템으로 구현하였으며, 시뮬레이션 결과를 VADE (Virtual Assembly Design Environment) 사례와 비교하여 물리모의 기반 협업 인터렉션 기술로 다양한 정비 작업을 모의하는 것이 가능함을 확인하였다.

• Natural Product Sciences
• /
• 제9권1호
• /
• pp.10-12
• /
• 2003

In the present study, dikamali resin (obtained from the leaf buds and the young shoots of Gardenia gummifera Linn.) was extracted with diethyl ether and the extract was vacuum dried. Qualitative tests confirmed the presence of flavonoids and free phenolic compounds in the extract. The antioxidant property (qualitative) of the extract was performed by TLC method $({\beta}-carotene-linoleate method)$. The $LD_{50}$ of the extract was found to be 2227 mg/kg by Karber's arithmetic method. The extract was screened for analgesic, anti-inflammatory, antipyretic (100, 200 and 400 mg/kg) and anthelmintic (0.1,0.2 and 0.5%w/v) activities by standard methods. The extract exhibited antioxidant property and prevented oxidation of ${\beta}-carotene$. The extract exhibited significant graded dose response for analgesic, anti-inflammatory, antipyretic and anthelmintic activities. The extract caused the death of earthworms in all experimental concentration whereas the standard drug (piperazine) only effected paralysis. The present study proved the claims of dikamali resin mentioned in the Indian system of medicine.

• 패션비즈니스
• /
• 제6권5호
• /
• pp.41-47
• /
• 2002

Until now, there is a tendency of most textile research focused on the certain specific area of textiles in profound. This paper based on the case study of inspection of manufacturing men's formal wear has been investigated in the relationship between defection of men's formal wear and mechanical properties of textile for fall and winter. As a results of implementing Pearson's Correlation, density, blend rate, bending property, the rate of silk blend, the formality of sewing are correlated with defection of men's formal wear. However, it is required the defection of classification standard in various types of the finished product in a further study. In addition to increase efficiency of production in the manufacture, it is necessary for scholars to investigate the direction of research according to the contingency approach based on the systems approach.

• 대한안전경영과학회지
• /
• 제19권3호
• /
• pp.137-150
• /
• 2017

Logistic enterprises want to be competitive enterprises in fierce logistic market and worry about the securement of discriminative competitiveness for it. The standards for the judgement of logistic industry's maintenance of competitiveness are not only economic feasibility of logistic costs but also the satisfaction of users because well-established service system for variety and enhancement of logistic needs. Some of the quality attributes sufficiently satisfy expectation of customers, but not guarantee high-quality satisfaction. Therefore, it's difficult to grasp quality attributes with the existing approach of perceived service quality. Quality attribute model suggested by Kano is widely used as the concept is accurate, there is high possibility to be used at the stage of product/service planning, and it can be easily applied. Kano model has a limitation that quality attributes are classified with mode and the differences between strong property of the quality attribute and week property in quality attributes were ignored. Therefore, Timko calculated customer satisfaction coefficient with the result of Kano's survey and effects of customer satisfaction and unsatisfaction through relations between satisfaction coefficient and unsatisfaction coefficient. The purposes of this study are to use ASC, the average of satisfaction coefficient and unsatisfaction, as the satisfaction of quality characteristics, decide the importance of quality characteristics with TOPSIS, a representative multi-standard decision-making method, and calculate strategy improvement propriety of logistic service quality.

• 한국의류학회지
• /
• 제24권5호
• /
• pp.714-723
• /
• 2000

The purpose of this study is to develop functional and sensible brassiere for middle-aged women. As a methodology, engineering design process, especially, QFD(Quality Function Deployment) was adopted to translate consumer's needs into product design parameters. Wearing tests of commercial brassiere were performed for the development o subjective measurement scale. The environmental condition was controlled at 28$\pm$1$^{\circ}C$, 65$\pm$3%RH. As results, subjective measurement scale and dimension for the evaluation of sensible brassiere were extracted from factor analysis. Four factors were fitting, aesthetic property, pressure sensation, displacement of brassiere due to movement. Regression equations with the subjective evaluation descriptors were developed for the prediction of wearing comfort of brassiere. (R2=.82) The most critical design parameter was wire-related property and second one was stretchability of main material of brassiere. Also, wearing comfort of brassiere was affected by the interaction of initial stretchability of wing and support of strap.

• Geomechanics and Engineering
• /
• 제10권2호
• /
• pp.207-224
• /
• 2016

Granulated coal ash (GCA), a mixture of the by-product from milling processes with a small amount of cement added, has recently come to be used as a new form of geomaterial. The shear strength and deformation behaviours of GCA are greatly determined by its relative density or void ratio. A series of drained triaxial compression tests were performed on cylindrical specimens of GCA at confining pressures of between 50 kPa and 400 kPa at initial relative densities of 50%, 70% and 80%. Experimental results show that a rise in relative density increases the peak shear strength and intensifies the dilation behaviour. The initial tangent modulus and secant modulus of the stress-strain curve increase with increasing initial relative density, whereas the axial and volumetric strains at failure decrease with level of initial relative density. The stress-dilatancy relationships of GCA at different relative densities and confining pressures display similar tendency. The dilatancy behaviour of GCA is modelled by the Nova rule and the material property N in Nova rule of GCA is much larger than that of natural sand.

• 한국재료학회지
• /
• 제32권1호
• /
• pp.1-8
• /
• 2022

In this investigation, Bi₂MoO₆ deposited graphene nanocomposite (BMG) was synthesized using a simple microwave assisted hydrothermal synthesis method. The synthesized BMG nanocomposite was characterized by X-ray diffraction, transmission electron microscopy, scanning electron microscopy with energy dispersive X-ray analysis, and photocurrent analysis. The study revealed that the catalysts prepared have high crystalline nature, enhanced light responsive property, high catalytic activity, and good stability. XRD results of BMG composite exhibit a koechlinite phase of Bi₂MoO₆. The surface property is shown by SEM and TEM, which confirmed a homogenous composition in the bulk particles of Bi₂MoO₆ and nanosheets of graphene. The catalytic behavior was investigated by the decomposition of Rhodamine B as a standard dye. The results exhibit excellent yields of product derivatives at mild conditions under ultrasonic/visible light-medium. Approximately 1.6-times-enhanced sono-photocatalytic activity was observed by introduction of Bi₂MoO₆ on graphene nanosheet compared with control sample P25 during 50 min test.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
• /
• pp.464-478
• /
• 2003

Free radicals and reactive oxygen species (ROS) caused by UV exposure or other environmental facts play critical roles in cellular damage and aging. The extract of tinged autumnal leaves of maple tree(Acer palmatum) has proven to be a powerful antioxidant. The Acer palmatum extract is very effective on the stabilization of biological membranes( containing unsaturated fatty acid). We studied photoprotective effect of the extract against UVB-induced cytotoxicity in human keratinocytes. The extract improved cell viability comparing to control after UVB irradiation. In the determination test of pro inflammatory cytokines the extract decreased expression of interleukin 1 a and 6, which play an important role in inflammation and skin erythema caused by UV. We also studied property of varying cosmetic formulations on the percutaneous absorption of the extract. After 24 hour in vitro penetration study, the content of the extract was more highly detected in skin residue part. This result showed the extract had relatively high compatibility of skin in our emulsion system. On human skin, after appling the product containing the extract we obtained a good result of antiwrinkle effect by skin visiometer. In conclusion, the Acer palmatum extract is a photoprotective and very effective in stressed and aged skin care. And we can predict the extract mainly affects on the skin cell and tissue in our emulsion system.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.211-214
• /
• 2008

The Mechanical properties of steel in hot strip mill were associated with the various rolling conditions such as alloy composition, plastic deformation, cooling history and so on. After coiling process of strip which is the end of hot rolling process, the coil can be the final product or can be applied by another process, that is, cold rolling or skin pass rolling with the additional changes of mechanical properties. Skin pass rolling process with the small reduction affects the mechanical properties of the strip. Because many kinds of hot strips are delivered to the customers after the skin pass process, it is important for us to know the skin pass effects for the mechanical properties of the hot rolling strip. In this study, the variations of mechanical properties of the strip after the skin pass rolling will be discussed. Then, the mathematical model will be proposed for the prediction of mechanical properties of the final products with the comparison between measured and calculated values.

• Archives of Plastic Surgery
• /
• 제51권1호
• /
• pp.14-19
• /
• 2024

Background Hyaluronic acid fillers can be manufactured using various processes. They have multiple properties, including their concentration, degree of modification, and rheological data. Cohesion is one such property to evaluate gel integrity; however, there is no standardized method for calculating this parameter. This study aimed to evaluate different tests for calculating hyaluronic acid cohesion and discuss the importance of hyaluronic acid cohesion as a consideration when selecting fillers. Methods The cohesion levels of five different hyaluronic acid fillers with different rheological properties were evaluated and compared using the drop weight, compression, tack, and dispersion time tests. Results The cohesion tests yielded different results in the samples. Samples 2 and 4 showed approximately two times the number of droplets when compared with Sample 5 in drop weight test. Samples 1, 2, 3, and 4 were superior to Sample 5 in tack test. Samples 1, 2, and 3 showed cohesive appearances at 95 seconds in most cases in dispersion test. Rheological test results did not reflect the measures of cohesion. Conclusion Although there are no definite standardized tests to evaluate the cohesion of hyaluronic acid fillers, our proposed tests showed similar results for different hyaluronic acid filler products. Further studies are needed to evaluate the cohesion of hyaluronic acid fillers and determine the clinical use of this distinguishing characteristic for clinicians selecting the product of choice. Level of evidence statement: These data are Level IV evidence.