• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.1
• /
• pp.120-127
• /
• 1999

The purpose of the study is to mae experimental whether the required property quantity and marker efficiency has variation of marking based on theoretical background of marking using th function of computer marking system. To investigate that variation of marking effect the required property quantity and marker efficiency as the following is tried to solve giving separation to item width of property cutting line detail which is believed to influence the required property quantity and marker efficiency. How to make experiment as follows separating in order marker of 1082 styles of women's ready-made clothes of with basic design(jacket. pants. skirt, two-piece). Then the data were subjected to analysis of variance and Duncan's multiple range test. The result of this studying as follows 1. In marker of women's jacket and pants the required property quantity shows lower when it is each item than when it is two-pice,. 2. In marker of women's pants marker efficiency shows the highest level when width is 132cm and it shows the lowest level when width is 112cm. 3. In width 152cm of skirt marker it has cutting lines shows lower the required property quantity than it doesn't have. 4. In marker of women's pants it has details shows more high marker efficiency than it doesn't have.

• Journal of Korea Foundry Society
• /
• v.31 no.4
• /
• pp.198-204
• /
• 2011

The present study was aimed to investigate the dependence of fatigue property on microporosity variation of low-pressure die-cast (LPDC) A356 alloy. The fatigue property of A356 alloy was evaluated through high cycle fatigue test, and the microporosity-terms used were the fractographic porosity measured from SEM observation on fractured surface and the volumetric porosity obtained through the density measurement using Archimedes's principle. The number of cycles to failure of A356 alloys depends obviously upon the variation of fractographic porosity, and can describe in terms of the defect susceptibility which depends on the microporosity variation at a given value of stress amplitude. The modified Basquin's equation was suggested through the combination of microporosity variation and static maximum tensile stress to fatigue strength coefficient. Using modified Basquin's equation, it could suggest that the maximum values of fatigue strength coefficient and exponent achievable in defect-free condition of A356 alloy are 265 MPa, -0.07, respectively.

• Journal of computational fluids engineering
• /
• v.12 no.4
• /
• pp.74-84
• /
• 2007

The flowfield characteristics in a straight rectangular channel have been investigated through a numerical model to analyze the regenerative cooling system that is used in rocket engine cooling. The supercritical hydrogen coolant introduces strong property variations that have a major influence on the developing flow and heat transfer characteristics. Of particular interest is the improved understanding of the physical characteristics of such flows through parametric studies. The approach used is a numerical solution of the full Navier-Stokes equations in the three dimensional form including the arbitrary equation of state and property variations. The present study compares constant and variable property solutions for both laminar and turbulent flow. For laminar flow, the variation of aspect ratio is examined, while for turbulent flow, the effects of variation of channel length and Reynolds number are discussed.

• Korean Journal of Mathematics
• /
• v.24 no.1
• /
• pp.1-13
• /
• 2016

This paper shows that the solutions to the perturbed functional dierential system $$y^{\prime}=f(t,y)+{\int_{t_0}^{t}}g(s,y(s),Ty(s))ds$$ have uniformly Lipschitz stability and asymptotic property. To sRhow these properties, we impose conditions on the perturbed part ${\int_{t_0}^{t}}g(s,y(s),Ty(s))ds$ and the fundamental matrix of the unperturbed system $y^{\prime}=f(t,y)$.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.4
• /
• pp.17-24
• /
• 2017

Shear wave velocity (or shear modulus) of rock filled zone of CFRD is very important factor in the evaluation of performance of CFRD under the load such as earthquake. A shear wave velocity profile can be determined by surface wave method but this profile has been uncertainty caused by spatial variation of material property in rock filled zone. This uncertainty in shear wave velocity profile could be evaluated by the reliability based analysis which uses a coefficient of variation of material property to consider uncertainty caused by spatial variation of material property. In this paper, the possible 600 shear wave velocity profiles in rock filled zone of CFRD were generated using the method based on harmonic wavelet transform and 8 shear wave velocity profiles by HWAW method in the field, and the coefficients of variation of shear wave velocity with depth were evaluated for the rock filled zone of CFRD in Korea.

• Korean Journal of Materials Research
• /
• v.14 no.9
• /
• pp.659-663
• /
• 2004

Magnetite was prepared by wet method and oil-based magnetic fluid also was prepared by its magnetite. Ahead of making magnetite, we investigated the variation of physical properties for changing $Fe^{3+}/Fe^{2+}$. Through the variation of the process mixing time, pH, magnetite content, we made magnetic fluid of magnetite. We examined the magnetic and frequency property by a toroidal mold. In result $Fe^{3+}/Fe^{2+}=1.2$, over the minute mixing time property of magnetite, Ms was 61.98 emu/g. Moreover, the B-H loop result indicated that the magnetic fluid followed paramagnetic behavior.

• Nuclear Engineering and Technology
• /
• v.46 no.5
• /
• pp.605-618
• /
• 2014

The effects of variability of the mechanical properties of lead rubber bearings on the response of a seismic isolation system are investigated. Material variability in manufacturing, aging, and operation temperature is assumed, and two variation models of an isolation system are considered. To evaluate the effect of ground motion characteristics on the response, 27 earthquake record sets with different peak A/V ratios were selected, and three components of ground motions were used for a seismic response analysis. The response in an isolation system and a superstructure increases significantly for ground motions with low A/V ratios. The variation in the mechanical properties of isolators results in a significant influence on the shear strains of the isolators and the acceleration response of the superstructure. The variation provisions in the ASCE-4 are reasonable, but more strict variation limits should be given to isolation systems subjected to ground motions having low A/V ratios. For application of seismic isolation systems to safety-related nuclear structures, the variation in the material and mechanical properties of the isolation system should be properly controlled during the manufacturing and aging processes. In addition, special consideration should be given to minimize the accidental torsion caused by the dissimilarity in the stiffness variations of the isolators.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.214-215
• /
• 2007

Int this paper, we studied the analysis on long-term durability and output power characteristics of PV modules by variation on local thermal property. Using 5 modules(80W), we measured the maximum output power change during the test period. And the optical transmittance of glass was compared with PV module's maximum power fluctuation. The external environment change effected contamination on the entire or local surface of module. This caused the local temperature variation of each solar cell on PV module. The specific analysis is shown in the following paper.

• Bulletin of the Korean Mathematical Society
• /
• v.38 no.1
• /
• pp.101-111
• /
• 2001

We investigate the property of h-stability, which is an important extension of the notions of exponential stability and uniform Lipschitz stability in variation for nonlinear Volterra difference systems.

• The Research Journal of the Costume Culture
• /
• v.13 no.6 s.59
• /
• pp.896-909
• /
• 2005

In need of studies on the kinds and structure of thread, the biggest variable factor in knitwear patterns, this study attempts: to examine the physical properties by thread type to basically establish systematic data in order to utilize various mixture and structure of yarn and to contribute to the development of optical patterns by building a systemic and scientific methods to produce knit wear patterns though a statistical analysis of the relation between the variations and physical properties. The results is as follows: with time, a feature of knit, which causes instability making it difficult to maintain the original shape, related to material properties, the weight and expansibility recovery rate have the greatest influence on the variation of wale lengths, though the amount varies by material. The variation of course contraction is closely related to density, the dense fabrics showing the highest values, due to the bust of the human body, the wale length variation of the front is greater than that of the back, by a regression analysis of material properties and the variations is obtained showing the weight, density and expansibility recovery rate have the greatest influence on the wale extension and course contraction of knit.