• 가족자원경영과 정책
• /
• 제13권3호
• /
• pp.181-205
• /
• 2009

The purpose of this study is to investigate some Influencing factors related to the wealth perception and property increase of 519 women in Seoul. The research was conducted from the end of February 15 to the beginning of January 20, 2009. The figures obtained were analyzed by frequency, percentage, mean, x-test, t-test, F-test, chi-square, and Duncan's F-test with SPSS pc+ The major findings of who study are summarized as follows: l.There were significant differences between the wealth recognition (economic plan affirmative and negative perception of wealth) for women according to social and psychological variables; economic plans have a higher value for married women, older women, those who have followed a postgraduate university course, those with higher income and expenditure, higher life satisfaction, and high and middle satisfaction with their economic life. In particular, economic plans varied significantly according to expectation of wealth in old age, and future economic prospects in the middle group. 2. Increased wealth and economic according to social and psychological variables (marital status, age, education, income, expenditure, life satisfaction, satisfaction with economic life, expectation of wealth in old age, future economic prospects) were shown to be associated with the following methods of increasing property: use of savings banks (p<.001) showed a rate of deposit of 20%-40% (p<.001) saving and thrift was a practice (p<001) that was related to the cost of living; and education expenditure (p<.001) as a property preparation period was exhibited in women aged 25-30 (p<.001). 3. There were significant differences in the recognition of wealth according to strategies for increasing wealth. There were no significant differences between mean of property acquisition and point of expenditure or the property preparation period in the perception of wealth. The related variables in rate of deposits were under 20% according to economic plan and negative wealth perception. In contrast, in the middle and high group, the economic plan and negative wealth perception were 20%-40% in relation to the rate of deposits. Variables related to the action of saving and thrift and property acquisition were practiced in the low and middle group of affirmative wealth recognition and the high group of negative wealth perception. The high group for wealthrecognition and the low group for wealthnegation exhibited little savings, thrift, and property accumulation. Those variables which point an expenditure the cost of living were education expenditure in all groups of negative wealth perception. The women in the study practiced more soundness economic planning according to their increased wealth and economic strategy. This study suggests that women should have positive wealth perception in their lives.

• Corrosion Science and Technology
• /
• 제8권3호
• /
• pp.103-109
• /
• 2009

An epoxy coating was designed to give a hydrophobic property on its surface by modifying it with three types of Amino Terminated Polydimethylsiloxane (ATP), and then effects of the modification on the structure, surface hydrophobic tendency, water transport behavior and hence corrosion protectiveness of the modified epoxy coating were examined using FT-IR spectroscopy, hydrothermal cyclic test, and impedance test. The surface of epoxy coating was changed from hydrophilic to hydrophobic property due primarily to a phase separation tendency between epoxy and modifier by the modification. The phase separation tendency is more appreciable when modified by ATP with higher molecular weight ATP at higher content. Water transport behavior of the modified epoxy coating decreased more in that with higher hydrophobic surface property. The resistance to localized corrosion of the modified epoxy coated carbon steel was well agreed with its water transport behavior and hydrophobic tendency.

• 공업화학
• /
• 제24권2호
• /
• pp.138-143
• /
• 2013

화학적 열화를 빠르게 유도할 수 있는 단파장의 자외선(254 nm)을 고밀도 폴리에틸렌의 표면에 조사하여, 생성된 carbonyl band의 변화로부터 기계적 물성 변화를 예측할 수 있는 지에 대한 가능성을 연구하였다. 오랜 시간이 요구되는 자연 태양광에 의한 옥외폭로시험이나, 제논-아크 광원에 의한 광 열화 대신에 광양자 에너지가 높은 UVC 램프를 사용함으로써, 유도되는 광열화의 화학적 특성이 동일한 기계적 물성 변화를 유발하는지를 확인하는 것에 본 연구의 의미가 있다. 인장시험과 크리프-파괴시험으로 진행된 고밀도 폴리에틸렌의 기계적 강도는 CI 변화에 유사한 양상을 보였으며, 특히 항복강도와 신장률은 자외선 노출시간과 밀접한 관계가 있음을 보여주었다. 따라서 빠른 표면 열화를 유발하는 UVC 램프를 활용한 카르보닐 지수와 기계적 물성 변화의 관계를 통하여 장시간이 요구되는 옥외에서의 기계적 물성변화를 보다 빠르게 파악할 수 있는 방법을 제시하였다.

• 동력기계공학회지
• /
• 제22권6호
• /
• pp.67-73
• /
• 2018

Gasoline that meets the quality standards is distributed in Korea. However, consumers who use toluene or solvent mixed with gasoline have appeared due to rising crude oil prices and for the purpose of tax evasion. Gasoline quality standard is enacted by the domestic and international research reference. A wrong fuel can influence automobile performance or environmental issue. Thus, empirical data from this issue is necessary. Therefore, this research observed catalyst influence by gasoline property change and inspect influence of environment. In this study, fuel property evaluation, lean-burn evaluation, and real vehicle exhaust emission test were performed. In the result of fuel property, the fuel "A" was measured to be up to 27% less octane than the normal gasoline and the distillation property was measured 24% higher than normal gasoline. In the test result of single cylinder engine lean-burn test, the fuels "A" and "B" show torque value 20% less than the normal gasoline. As a result of vehicle test using the catalyst, the fuel "A" was increased more than the normal gasoline with 83% THC, 1,806% CO and 128% NOx, and the fuel "B" was increased more than normal gasoline with 1.6% THC, 391% CO and 142% NOx.

• 한국자동차공학회논문집
• /
• 제9권3호
• /
• pp.51-59
• /
• 2001

A diesel engine oil formulated in KRICT and a commercial diesel engine oil (API CG-4) were tested by car and their Kinematic Viscosity, TAN, TBN, metal content, additive depletion, anti-wear property and IR analysis were analyzed. From the research, both of the tested oils had almost the same properties f3r the change of TAN and TBN, but the change of Kinematic Viscosity of formulated oil was slightly higher than that of commercial oil. The iron content in the commercial oil increased rapidly from 7000 km while that of the formulated oil was still low. These results were confirmed by the anti-wear test with a 4-ball wear test machine for the each samples. Also, for the commercial oil, the depletion factor of the Zn-DTP which was added as an anti-wear property did not change any more after 7000 km. But, that of the formulated oil changed continuously to 8000 km, which means that the ability to prevent wear of the sliding pairs exists for the formulated oil. From the analysis results of oil properties obtained by field test, it was found that the commercial oil could be used only within 7000 km, but the formulated oil could be used more than 8000 km without severe wear of the sliding parts in the diesel engine.

• 한국초등수학교육학회지
• /
• 제23권1호
• /
• pp.143-168
• /
• 2019

초등학교 수학에서 최근 대수적 사고의 중요성과 함께 수와 연산의 성질을 암묵적으로 다루기보다 그 자체로 의미 있게 탐구해야 한다는 필요성이 부각되어 왔다. 이러한 필요성을 바탕으로, 본 연구는 초등학교 3학년 학생들을 대상으로 곱셈 단원을 재구성하여 연산의 성질을 지도한 후, 이에 대한 학생들의 이해가 어떻게 신장되었는지 분석하는 데 초점을 두었다. 이를 위하여 3개의 학급 학생들이 본 연구에 참여하였으며, 곱셈의 연산 성질에 대한 사전·사후 검사를 실시하여 그 결과를 분석하였다. 연구 결과, 학생들은 대체로 곱셈의 결합법칙, 교환법칙, 분배법칙을 (두 자리 수)×(한 자리 수)의 맥락에서 적용하는 문항, (두 자리 수)×(두 자리 수)의 맥락에서도 연산 성질이 적용되는지 추론하는 문항에서 정답률이 향상되었으며, 일부 학생들은 연산 성질에 대해 일반화해서 설명하는 능력이 신장되었다. 이러한 결과를 토대로 초등학교 수학에서 연산 성질을 지도하는 방안과 관련한 시사점을 논의하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.231-236
• /
• 2001

A newly developed Advanced Indentation System (AIS), which is a portable and nondestructive system for evaluating tensile properties, was used to measure mechanical behavior of materials used under high temperature and pressure conditions. This test measures indentation load-depth curve during indentation and analyzes the mechanical properties related to deformation and fracture. Aging effects of Cr-Mo and Cr-Mo-V steel at high temperature were simulated. Tensile properties including yield strength and tensile strength at various temperature are obtained from the test. For all test materials and conditions, the AIS-derived results were in good agreement with those from conventional standard test method. Examples of the test results ate given and potential applications of the AIS to assess the integrity of aging structures are briefly discussed.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.189-192
• /
• 2007

고무제품의 경우 구조성능평가를 위해 단축인장, 순수전단, 이축인장 및 압축시험을 수행한다. 일반적으로 단축인장시험값을 기초물성으로 사용하며 용도에 따라 다른 시험을 수행한다. 검증을 위해 단축인장시험/해석 결과를 비교하여 타당성을 확인했다. 본 연구에서는 전단강성이 주요인자인 제품의 성능평가를 위해 단축인장시험에서 획득한 물성을 적용한 QLS 해석모델의 결과를 비교, 검증하였다.

• Structural Engineering and Mechanics
• /
• 제54권5호
• /
• pp.973-986
• /
• 2015

Ethylene tetrafluoroethylene (ETFE) foil is a novel structural material which has being used in shell and spatial structures. This paper studies biaxial creep property of ETFE foil by creep tests and numerical simulation. Biaxial creep tests of cruciform specimens were performed using three stress ratios, 1:1, 2:1 and 1:2, which showed that creep coefficients in biaxial tension were much smaller than those in uniaxial one. Then, a reduction factor was introduced to take account of this biaxial effect, and relation between the reduction factor and stress ratio was established. Circular bubble creep test and triangle cushion creep test of ETFE foil were performed to verify the relation. Interpolation was adopted to consider creep stress and reduction factor was involved to take account of biaxial effect in numerical simulation. Simulation results of the bubble creep test embraced a good agreement with those measuring ones. In triangle cushion creep test, creep displacements from numerical simulation showed a good agreement with those from creep test at the center and lower foil measuring points.

• 한국수소및신에너지학회논문집
• /
• 제34권1호
• /
• pp.32-37
• /
• 2023

In this study, in order to propose a integrity evaluation for type IV high aspect ratio hydrogen storage vessel, a numerical analysis of the hoop tensile test and pressure test was performed using FEM software, and the results of the actual physical property test were reviewed. The property test and numerical analysis were compared, and very similar results were obtained with deviations of maximum tensile strength of 4.75% and fiber direction stress of 5.39%.