• Communications for Statistical Applications and Methods
• /
• 제13권1호
• /
• pp.135-140
• /
• 2006

The paper by Paik (1985) introduced a structural property of the designs which was related to the concordance matrix $NN^{t}$ of the design. This special property was termed Property-C. The designs which have Property-C need not calculation of the generalize inverse of C matrix for solution of reduced normal equation. Paik also mentioned that some block designs belong to Property-C. This paper show the Extended Group Divisible designs defined by Hinkelmann (1964) are included in Property-C.

• 한국태양에너지학회 논문집
• /
• 제24권3호
• /
• pp.9-17
• /
• 2004

Nowadays, a concern of building environment has been arousing. Furthermore, according to this trend, the social concern has expended continuously. Especially, the right of daylight is essential for both the pleasant life and building maintenance. In this reason, it has dealt as like property right. Therefore, the Infringement on the right of daylight can be applicable to the infringement of property right. However, few un-notarized calculation methods have been used without careful examination about daylight duration calculation methods which can be used for determine sunshine infringement as the dispute solution, therefore. In this thesis We analyzed and concluded the differentiations of two calculation methods which are using nowadays.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1667-1671
• /
• 2003

A computer program to calculate properties of nitrogen is developed. Procedures for the calculation is briefly discussed. The program calculates unknown thermodynamic properties fixing the state with two independent input properties. If input value by user is inappropriate, it displays an error message and replaces the input value with an appropriate one. In addition user can change units with easy. The program developed in this work can be utilized to calculate parameters required for the simulation and design of an equipment using nitrogen.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.256-260
• /
• 2003

A computer program to calculate thermodynamic properties of oxygen is developed. Procedures for the calculation is briefly discussed. The program calculates unknown thermodynamic properties fixing the state with two independent input properties. If input value by user is inappropriate, it displays an error message. In addition user can change units with easy. The program developed in this work can be utilized to calculate parameters required for the simulation and design of an equipment using oxygen.

• 산업경영시스템학회지
• /
• 제20권44호
• /
• pp.497-506
• /
• 1997

In this paper described is the software developed to calculate the physical properties of arbitrary section shape. The software consists of arbitrary section display module(ASDM) and section property calculation module(SPCM). ASDM defines and displays the shape of arbitrary section and SPCM calculates its properties such as area, centroid, moment of inertia, torsional constant, etc.. In many cases, calculation of section properties is not easy because user has to define the vertex coordinates which are difficult to do so in the case of arbitrary section. In the developed software, however, since user is asked to define only points of central lines and thickness of arbitrary section, the calculattion task of arbitrary section is very effective.

• 시스템엔지니어링학술지
• /
• 제17권2호
• /
• pp.37-48
• /
• 2021

Improving the plant protection system against unforeseen changes/transients during operation is essential to maintain plant safety. Under this condition, it requires rapid and accurate signal processing. The use of an Intellectual Property (IP) core for floating point calculations for Safety Critical MMIS can make numerical computations easier and more precise, improving system accuracy. It can represent and manipulate rational numbers as well as a much broader range of values with dynamic range in nuclear power plant. Systems engineering approach (SE) is used through the development process, it helps to reduce complexity and avoid omissions and invalid assumptions as delivers a better understanding of the stakeholders needs. For the implementation on the FPGA target board, the 32-bit floating-point arithmetic with IEEE-754 standards has designed using Simulink model in Matlab for all operations of addition, subtraction, multiplication and division and VHDL code generated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.147-149
• /
• 1994

In designing high efficiency electrical machines, calculation of iron loss is very important. And it is reported that in the induction motor and in the T-joint of 3 phase transformer, there occurred rotational magnetic field and much iron loss is generated owing to this field. In this paper, rotational power loss in the electrical machine under rotational magnetic field is discussed. Until now, loss analysis is based on the magnetic properties under alternating field. And with this one dimensional magnetic propertis, it is difficult to express iron loss under rotational field. In this paper, we used two dimensional magnetic property data for the numerical calculation of rotational power loss. We used finite element method for calculation and the analysis model is two dimensional magnetic property measurement system. We used permeability tensor instead of scalar permeability to present two dimensional magnetic properties. And in this case, we cannot uniquely define energy functional because of the asymmetry of the permeability tensor, so Galerkin method is used for finite element analysis.

• 대한기계학회논문집B
• /
• 제34권10호
• /
• pp.947-955
• /
• 2010

대부분의 석유 가스전은 탄화수소혼합물과 일반기체 등 저류층 내부 유체의 성분조성에 따라 저류층내 상거동 특성이 매우 민감하게 변화한다. 석유 가스전의 평가와 개발 생산계획을 수립함에 있어, 이러한 상거동에 따른 기체와 액체의 성분비 결정과 석유와 가스의 이상유동 해석을 위한 저류유체의 PVT관계 및 포화물성의 규명은 필수적이다. 이중에서 특히, 포화물성의 계산은 수렴성이 나빠, 이상 유동의 해석적 연구에 있어서 많은 어려움을 초래하는 원인이 되고 있다. 이에 본 연구에서는 포화물성 의 계산에 있어서 수렴도 향상을 위한 새로운 초기값 추정 방법과 근 탐색 알고리듬을 제안하고, 성능비교 등을 통한 수렴도 영향인자에 대한 분석을 시도하였다. 결과적으로, 제안된 방법을 통해 포화물성 해석 수렴성을 개선하였고 GUI 기반의 새로운 다성분 다상거동해석 시뮬레이터의 개발에 적용하였다.

• Journal of the Korean Data and Information Science Society
• /
• 제19권4호
• /
• pp.1027-1036
• /
• 2008

Value at Risk(VaR) is a fundamental tool for managing market risks. It measures the worst loss to be expected of a portfolio over a given time horizon under normal market conditions at a given confidence level. Calculation of VaR frequently involves estimating the volatility of return processes and quantiles of standardized returns. In this paper, we introduced and applied the CreditMetrics model to estimate the credit VaR of Korean Property and Casuality insurers.

• 한국멀티미디어학회논문지
• /
• 제23권12호
• /
• pp.1552-1564
• /
• 2020

As various styles of fonts were used, there were problems such as output errors due to uninstalled fonts and difficulty in font recognition. To solve these problems, research on font recognition and recommendation were actively conducted. However, Hangul font research remains at the basic level. Therefore, in order to automate the comparison on Hangul font similarity in the future, we analyze the influence of each stroke element property. First, we select seven representative properties based on Hangul stroke shape elements. Second, we design a calculation model to compare similarity between fonts. Third, we analyze the effect of each stroke element through the cosine similarity between the user's evaluation and the results of the model. As a result, there was no significant difference in the individual effect of each representative property. Also, the more accurate similarity comparison was possible when many representative properties were used.