• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.139-143
• /
• 2015

We describe a survey of nearby core-collapse supernova (SN) explosion sites using integral field spectroscopy (IFS) techniques, which is an extension of the work described in Kuncarayakti et al. (2013). The project aims to constrain SN progenitor properties based on the study of the immediate environment of the SN. The stellar populations present at the SN explosion sites are studied by means of integral field spectroscopy, which enables the acquisition of both spatial and spectral information of the object simultaneously. The spectrum of the SN parent stellar population gives an estimate of its age and metallicity. With this information, the initial mass and metallicity of the once coeval SN progenitor star are derived. While the survey is mostly done in optical, the additional utilization of near-infrared integral field spectroscopy assisted with adaptive optics (AO) enables us to examine the explosion sites in high spatial detail, down to a few parsecs. This work is being carried out using multiple 2-8 m class telescopes equipped with integral field spectrographs in Chile and Hawaii.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.12a
• /
• pp.80-80
• /
• 2020

Glycyrrhizae Radix (GR), commomly known as liquorice, is a medicinal and edible plant widely used in East Asia with its pharmacological properties. Currently, Glycyrrhiza uralensis, G. glabra and G. inflata are used for pharmaceutical purposes in Korea and then the improved Glycyrrhiza varieties, WON-GAM (WG) has been developed by Korea Rural Development Administration. To evaluate equivalence of efficacy, several comparative studies between already-registered species and new cultivars have been conducted. To evaluate equivalence of efficacy, several comparative studies between already-registered species and new cultivars have been conducted. The aim of this study was to evaluate the effect of WG on fecal microbiota in DSS-induced colitis model. Fecal microbiota was analyzed by terminal restriction fragment length polymorphism (T-RFLP). The composition of the fecal microbiota did not show a specific pattern based on experimental groups; however, a tendency toward an increase in the proportion of Lactobacillales was observed. Glycyrrhiza varieties could change composition of fecal microbiota in DSS-induced colitis model. This work was carried out with the support of "Cooperative Research Program for Agriculture Science and Technology Development (Project No. PJ014246022020)" Rural Development Administration.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.3
• /
• pp.214-222
• /
• 2010

The paper presents investigations on to which degree the sinking speed of longlines is influenced by type of bait, bait sinking orientations and anchor weights. The main aim of this study is to obtain further insight in the ocean current displacement phenomena in demersal longlining. The sinking speed is one of the main factors deciding the current displacement. In an ongoing project, sinking speed experiments with longlines with 6 kg and 10 kg anchor weights have been carried out in the Trondheim fjord. The longlines used in the first experiments were rigged without bait and hook. The results of these experiments with two different anchor weights have revealed only a slight difference in the sinking speed, except for the part near to the anchors, even though the sinking speed of longlines in general is supposed to be much influenced by the anchor weights. The reason for the obtained result is supposed to be that the experiments have been carried out at relative shallow waters. Further studies have included bait sinking experiments in the flume tank. The experiments showed that the drag coefficient of "fillet type (flat)" bait varied from 0.763 to 1.735, while it for "elliptic type" bait varied from 0.62 to 1.483. Other activities have included calculation of the sinking speed of longlines as a function of the established resistance coefficients of bait of various shape and size for commercial longlining. The calculated sinking speed of a longline with the fillet type bait was found to be 12.4 to 16.5% lower than for a longline without bait.

• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.1081-1087
• /
• 2024

The construction of 3D Printed Concrete (3DPC) structures, particularly in reinforced concrete, still poses challenges due to constraints in construction methods. Additionally, the unique mixture design of 3DPC typically results in noticeable drying shrinkage. Utilizing short fibers for fiber reinforcement is a reliable approach that may replace reinforcing steel and address the challenge of volume stability. In this study, polypropylene (PP) fibers and polyoxymethylene (POM) fibers were incorporated into the total volume of concrete at additional percentages of 0.5%, 1.0%, and 1.5% to printed the specimen. While ensuring printability, various experiment were conducted to evaluate compressive strength, flexural strength, anisotropy, and drying shrinkage,to ensure the impact of fiber type and content on the mechanical properties and drying shrinkage of 3DPC. The results indicate that 3DPC exhibits significant strength loss after fiber addition, with loss percentages approximately ranging from 5% to 55% for compressive strength and 9% to 57% for flexural strength. The extent of loss improves with increasing PP fiber content, while the strength of POM fibers continues to decline with increased usage. Furthermore, significant anisotropy is observed in 3DPC after fiber addition, with compressive strength relations appearing as X > Y ≈ Z in various directions, while flexural strength relations are demonstrated as Y ≈ Z > X. Concerning drying shrinkage, the addition of 1.0% POM fibers proves most effective in inhibiting drying shrinkage, reducing shrinkage by approximately 6% at the age of 56 days. In contrast, the presence of PP fibers, regardless of quantity, adversely affects drying shrinkage.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.12
• /
• pp.2043-2048
• /
• 2015

Bacillus thuringiensis microbial insecticide products have been applied worldwide. Although a few cases of B. thuringiensis foodborne illness have been reported, little is known about the toxigenic properties of B. thuringiensis isolates. The aims of this study were to estimate the pathogenic potential of B. thuringiensis selected from microbial insecticide products, based on its possession of toxin genes and production of enterotoxins. Fifty-two B. thuringiensis strains selected from four kinds of microbial insecticide products were analyzed. PCR assay for detection of toxin genes and immunoassay for detection of enterotoxins were performed. The hemolysin BL complex as a major enterotoxin was produced by 17 (32.7%), whereas the non-hemolytic enterotoxin complex was detected in 1 (1.9%) of 52 B. thuringiensis strains. However, cytK, entFM, and ces genes were not detected in any of the tested B. thuringiensis strains. The potential risk of food poisoning by B. thuringiensis along with concerns over B. thuringiensis microbial insecticide products has gained attention recently. Thus, microbial insecticide products based on B. thuringiensis should be carefully controlled.

• Wind and Structures
• /
• v.20 no.6
• /
• pp.763-791
• /
• 2015

"Wind and Ports" is a European project that has been carried out since 2009 to handle wind forecast in port areas through an integrated system made up of an extensive in-situ wind monitoring network, the numerical simulation of wind fields, the statistical analysis of wind climate, and algorithms for medium-term (1-3 days) and short term (0.5-2 hours) wind forecasting. The in-situ wind monitoring network, currently made up of 22 ultrasonic anemometers, provides a unique opportunity for detecting high resolution thunderstorm records and studying their dominant characteristics relevant to wind engineering with special concern for wind actions on structures. In such a framework, the wind velocity of thunderstorms is firstly decomposed into the sum of a slowly-varying mean part plus a residual fluctuation dealt with as a non-stationary random process. The fluctuation, in turn, is expressed as the product of its slowly-varying standard deviation by a reduced turbulence component dealt with as a rapidly-varying stationary Gaussian random process with zero mean and unit standard deviation. The extraction of the mean part of the wind velocity is carried out through a moving average filter, and the effect of the moving average period on the statistical properties of the decomposed signals is evaluated. Among other aspects, special attention is given to the thunderstorm duration, the turbulence intensity, the power spectral density and the integral length scale. Some noteworthy wind velocity ratios that play a crucial role in the thunderstorm loading and response of structures are also analyzed.

• Smart Structures and Systems
• /
• v.24 no.6
• /
• pp.709-721
• /
• 2019

This paper investigates the framework of vision-based dense displacement and strain measurement of miter gates with the approach for the quantitative evaluation of the expected performance. The proposed framework consists of the following steps: (i) Estimation of 3D displacement and strain from images before and after deformation (water-fill event), (ii) evaluation of the expected performance of the measurement, and (iii) selection of measurement setting with the highest expected accuracy. The framework first estimates the full-field optical flow between the images before and after water-fill event, and project the flow to the finite element (FE) model to estimate the 3D displacement and strain. Then, the expected displacement/strain estimation accuracy is evaluated at each node/element of the FE model. Finally, methods and measurement settings with the highest expected accuracy are selected to achieve the best results from the field measurement. A physics-based graphics model (PBGM) of miter gates of the Greenup Lock and Dam with the updated texturing step is used to simulate the vision-based measurements in a photo-realistic environment and evaluate the expected performance of different measurement plans (camera properties, camera placement, post-processing algorithms). The framework investigated in this paper can be used to analyze and optimize the performance of the measurement with different camera placement and post-processing steps prior to the field test.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2007.10a
• /
• pp.63-79
• /
• 2007

Several remedial works were attempted to stabilize the collapsed area of the inlet slopes of diversion tunnel, but prevention of any further movement was being only carried out at beginning stage by filling the area with aggregates and rock debris, after several cracks had been initiated and developed around the area. The extra specialty developed folding zone is consisted with highly weathered Greywacke and Black shale. The suggested solution is to improve the properties of the rock mass of failed area by choosing the optimum level of reinforcement through the increment of slope rock support design so as to control the movement of slopes during the re-excavation. The Bakun hydroelectric project includes the construction of a hydroelectric power plant with an installed capacity of 2,520MW and a power transmission system connecting to the existing transmission networks in Sarawak and Western Malaysia. The power station will consist of a 210m height Concrete Faced Rockfill Dam. During the construction of the dam and the power facilities the Balui River has to be diverted of the tunnels is 12m and the tunnel width is 16m at the portal area. This paper describes the stability analysis and design methods for the open cut rock slopes in the inlet area of the diversion tunnels. The geotechnical parameters employed in stability calculations were given as a function of four defined Rock Mass Type (RMT) which were based on RMR system from Bieniawski. The stability calculations procedure of the rock slopes are divided into two stages. In the first stage, it is calculated for the stability of each "global" slope without any rock support and shotcrete system. In the second stage, it is calculated for each "local" slope stability with berms and supported with rock bolts and shotcrete. The monitoring instrumentation was performed continuously and some of the design modification was carried out in order to increase the safety of failed area based on the unforeseen geological risks during the open cut excavation.

• Korean Journal of Materials Research
• /
• v.15 no.2
• /
• pp.134-138
• /
• 2005

This study was performed to investigate the surface properties of electrochemically oxidized pure niobium by anodic oxide and hydrothermal treatment technique. Niobium specimens of $10mm\times10mm\times1.0mm$ in dimension were polished sequentially from $\#600,\;\#800,\;\#1000$ emery paper. The surface of pure niobium sperimens was anodized in an electrolytic solution that was dissolved calcium and phosphate in water. The electrolytic voltage was set in the range of 250 V and the current density was $10mA/cm^2$. The specimen was hydrothermal treated in high-pressure steam at $300^{\circ}C$ for 2 hours using an autoclave. And all specimens were immersed in the in the Hanks' solution nth pH 7.4 at $37^{\circ}C$ for 30 days. The surface of specimen was characterized by surface roughness, scanning electron microscope(SEM), energy dispersion X-ray analysis(EDX), X-ray photoemission spectroscopy(XPS) test. The value of surface roughness was the highest in the anodized sample and $0.41{\pm}0.04\;{\mu}m$. The results of the SEM observation show that oxide layers of the multi porosity in the anodized sample were piled up on another, and hydroxyapatite crystal was precipitate from the surface of the hydrothermal treated sample. In the XPS analysis, O, Nb, C peak and small amounts of N peak were found in the polished specimens while Ca and P peak in addition to O, Nb, C and peak were observed in the hydrothermal treated sample.

• Journal of Technologic Dentistry
• /
• v.27 no.1
• /
• pp.79-88
• /
• 2005

This study was performed to investigate the surface properties of electrochemically oxidized pure niobium by anodic oxide and hydrothermal treatment technique. Niobium specimens of $10\times10mm$ in dimension were polished sequentially from #600, #800, #1000 emery paper. The surface pure niobium specimens were anodized in an electrolytic solution that was dissolved calcium and phosphate in water. The electrolytic voltage was set in the range of 250 V and the current density was 10 $mA/cm^2$. The specimen was hydrothermal treated in high-pressure steam at 300$^{\circ}C$ for 2 hours using an autoclave. Then, specimens were immersed in the Hanks' solution with pH 7.4 at 37$^{\circ}C$ for 30 days. The surface of specimen was characterized by scanning electron microscope(SEM), energy dispersive X-ray microanalysis(EDX), potentiostat/galvanostat test, and cytotoxicity test. The results obtained was summarized as follows; According to the result of measuring corrosion behavior at 0.9% NaCl, corrosion resistance was improved more specimens treated with anodic oxide than in hydrothermal treated ones. The multi-porous oxide layer on surface treated through anodic oxidation showed a structure that fine pores overlap one another, and the early precipitation of apatite was observed on the surface of hydrothermal treated samples. According to the result of EDX after 30 days deposition in Hanks' solution, Ca/P was 1.69 in hydrothermal treated specimens. In MTT test, specimens treated through anodic oxidation and hydrothermal treated ones showed spectrophotometer similar to that of the control group. Thus no significant difference in cytotoxicity was observed (P>0.05).