• Journal of Periodontal and Implant Science
• /
• v.32 no.4
• /
• pp.769-779
• /
• 2002

This present study was carried out to find the effects of calcium aluminate cement($CaO\;{\cdot}\;Al_2O_3$, CAC), which has been developed with bio-compatibility and mechanical properties, in biological environments. Two different particle sizes of CAC - 3.5${\mu}m$ vs. 212${\sim}$250${\mu}m$ which is recommended in periodontal bone grafting procedures-were filled in 8mm calvarial defect in Sprague-Dawley rat. The specimens were examined histologically, especially the bone-cement interface and the response of surrounding tissues. The results are as follows; 1. In the control group, inflammatory cells were observed at 2 weeks. At 8 weeks, periosteum and dura mater were continuously joined together in the defect areas. But in the center of defect area were filled up with the loose connective tissues. 2. In the experimental group l($212{\mu}m{\sim}250{\mu}m$ particle), immature bone was formed and outermost layer was surrounded by osteoid layer at 2 weeks. Osteoblasts were arranged between immature bone and osteoid layer. And, osteoid layer was remained until 8 weeks after surgery. 3. In the experimental group 2, periosteum and dura mater lost its continuity at 2 weeks. Scattering of CAC particles and infiltration of inflammatory cells were observed, which this findings deepened at 8 weeks. The result of this study shows that when calvarial defects in white rats are filled with calcium aluminate cement of 212${\sim}$250${\mu}m$, the materials are to be bio-compatible in growth and healing on surrounding tissues. When further researches are fulfilled, such as direct bone adhesion and bone regeneration ability, it's possible that CAC could be applied to various periodontology fields in the future.

• Journal of Digital Contents Society
• /
• v.16 no.4
• /
• pp.555-564
• /
• 2015

Since the size of the construction project has become massive, complicated and specialized, the use for a substantial amount of information provided from diverse participants is considered important. Schedule information obtained from a variety of sources is key during the construction project. Misunderstanding of schedule management information causes delay of construction period and low quality of construction. Currently, interest in BIM (Building Information Modeling) that produces the necessary data for the entire life cycle of the building process is rising. The study is to construct the BIM-base-information system in order to systematically manage schedule information of the construction work. For this purpose, the study established a BIM-base-schedule-management-business process and drew a classification system for the work for schedule-information construction. The study also drew information that can be extracted from the BIM model among properties required to build certain information. The schedule is made upon consideration of information needed for schedule management, and information required to schedule a timeline of the construction project by process is established.

• The Journal of the Korea Contents Association
• /
• v.14 no.1
• /
• pp.119-127
• /
• 2014

As keen marketing competition for increasing corporate image has been begun, the creative level of annual report design, which is deeply involved with investment, has became a fundamental measure of corporate value. Good commercial design has to have both practical and aesthetic aspect. For make more creative annual report project. it's worth to find world design trend in practical way. The point of study focuses and sorts on physical properties of out-put works by the view point of editorial design, and tries to find the possibility of common design style. It analyzes key message, pagination plan and feature pages of 2013 ARC awarded annual report works in interior design category. The visual image and typographic style study of awarded works will help planner and designer who develop annual report project, because this research data reduces their process. Then it's possible to have more opportunities to create project and supports background material for making a presentation for clients.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.1
• /
• pp.37-42
• /
• 2016

In this study, we examined the burning rate of the uncured propellant (with and without a curing agent application) in order to inspect the process of the HTPB solid propellant. The burning rate of the uncured propellant, that did not contain the curing agent, was approximately 9.7 mm/s at 1000 psi. In relation to the curing time, the burning rate was constant. The propellant, with the curing agent application, was approximately 8.1 mm/s showed a tendency of slowing as it burned. When the cure reaction rate was low, in accordance to the time, there were small changes in burn rate. However, when the cure reaction rate was high, the difference in burning rate was increased. The burning rate of a fully-cured propellant was approximately 6.8 mm/s, which appeared to be the lowest in order.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.75.1-75.1
• /
• 2011

Coal gasification is considered as one of the most prospective technologies in energy field since it can be utilized for various products such as electricity, SNG (Synthetic Natural Gas or Substitute Natural Gas) and other chemical products. Among those products from coal gasification, SNG is emerging as a very lucrative product due to the rising prices of oil and natural gas, especially in Asian countries. The process of SNG production is very similar to the conventional IGCC in that the overall process is highly dependent on the type of gasifier and coal rank. However, there are some differences between SNG production and IGCC, which is that SNG plant requires higher oxygen purity from oxygen plant and more complex gas cleanup processes including water-gas shift reaction and methanation. Water-gas shift reaction is one of the main process in SNG plant because it is a starting point for the latter gas cleanup processes. For the methanation process, syngas is required to have a composition of $H_2$/CO = 3. This study reviewed various considerations for water-gas shift process in a conceptual design on an early stage like a feasibility study for a real project. The factors that affect the design parameters of water-gas shift reaction include the coal properties, the type of gasifier, the overall thermal efficiency of the plant and so on. Water-gas shift reaction is a relatively proven technology compared to the other processes in SNG plant so that it can reduce technological variability when designing a SNG project.

• Journal of the Society of Disaster Information
• /
• v.15 no.1
• /
• pp.1-11
• /
• 2019

Purpose: This study intends to determine how disaster prevention characteristics of important state-designated wooden cultural properties in Gyeongsangnam-do vary according to the surrounding environments and to examine disaster prevention measures for wooden cultural properties that fit their surrounding environments accordingly. Method: The designation status and characteristics of cultural properties in Gyeongsangnam-do and Gyeongsangbuk-do were identified, and the damage status of cultural properties in Gyeongsangnam-do and Gyeongsangbuk-do was reviewed based on the history of disasters. Also, the disaster prevention environments for 58 state-designated wooden cultural properties in Gyeongsangnam-do and Gyeongsangbuk-do were analyzed separately into mountainous area, rural area and urban area, topographic characteristics were drawn. Results: For cultural properties located in urban areas, it was found that security guards were arranged properly and disaster prevention training was carried out well. In addition, access condition to the cultural properties was adequate; prompt access to such properties was possible. In rural areas, flame retardant works have been undertaken properly and many cultural properties were found to be located on a flat ground. Mountainous areas had highly inadequate access condition to cultural properties and disasters occurred most frequently in these areas in the past. Conclution: First, for wooden cultural properties located in urban areas, it is necessary to secure the self-defense fire service manpower for an initial response and reinforce the disaster prevention education. Second, for wooden cultural properties located in rural areas, prevention projects such as insect control project and disaster prevention insurance should be carried out in order to protect the cultural properties. Third, as for wooden cultural properties located in mountainous areas, it is necessary to prepare establish to reinforce self-response capability.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.4
• /
• pp.1-9
• /
• 2013

The "Historic city Preservative law" was legislated for the preservation of cultural properties and enacting regulations of managing the environment around them in 2004. This law was revised to "Historic city Preservative and Development law" in 2012, and specified the criteria for permissible behaviors in the preservative district. Therefore, this paper focused on the ancient capital Gyeongju and developed a comprehensive system for evaluating the value of the ancient historic district based on Analytic Hierarchy Process (AHP). Through the evaluation of the ancient historic districts, which are the pilot project districts in the "Gyeongju Ancient Capital Preservation Plan", some preferential projects were objectively proposed. As a result, according to the evaluation among 10 ancient historic districts in Gyeongju, Daereungwon got a score of 78.34, which is the highest among 7 special preservation districts. On the other side, the Gyo-dong area got a score of 76.14, the highest among 3 historic and cultural environmental districts. Finally, for the preservation and development of Gyeongju, some efficient preservation and development plans were objectively proposed for the pilot project districts in the "Gyeongju Ancient Capital Preservation Plan".

• Journal of the Korean Institute of Gas
• /
• v.25 no.4
• /
• pp.10-18
• /
• 2021

CO₂ storage technology in an aquifer is one of the most effective way to decrease global warming due to a high storage capacity and economics. A demonstration-scale offshore CO₂ storage project was performed in a geological deep aquifer in the Pohang Basin, Korea for a technological development of large-scale CO₂ storage. A challenging issue in the early design stage of the project was to establish the proper injectivity during CO₂ injection. To solve this issue, injection conditions were calculated by calculating injection rate, pressure, temperature, CO₂ phase change, and thermodynamic properties. For this study, we simulated and numerically analyzed CO₂ phase change from gas to supercritical phase and flow behavior in transport piping and injection tubing using OLGA program. Our results provide the injectivity conditions of CO₂ injection system combined with a bottomhole pressure of an aquifer.

• Journal of agriculture & life science
• /
• v.50 no.1
• /
• pp.125-136
• /
• 2016

The Korea Forest Service(KFS) has been initiating restoration activities of ridgeline in damaged and fragmented areas of Baekdudaegan since 2011. Completed project in Ihwaryeong, Yuksimnyeong & Beoljae(2012; 2013) were selected as sites for this study. The changes in microclimate condition, vegetation composition and soil properties between project sites and adjacent stands were compared to evaluate the effect of restoration at early stage(after 2years). Pinus densiflora was planted mainly for these restoration sites, however Robinia pseudoacacia and Alnus sibirica invaded the area two years after the restoration activities. Ihwaryeong showed the most changes in understory vegetation among the study sites. Exotic species, such as Ambrosia artemisiifolia, Oenothera odorata, Erigeron annuus, and Coreopsis tinctoria invaded Ihwaryeong, and the dominance have invaded currently. It resulted from the poor survival rate of trees and high difference in microclimate wherein there's an increased temperature and decreased humidity in both restored sites and adjacent stands. In addition, it is also caused by poor soil chemical property, especially pH and organic matter content due to lack of humus layer and its accumulation, compared to adjacent forest soil in restored sites. Significant difference on chemical soil property was observed between restored sites and adjacent forest but no significant difference was observed after two years of restoration. Ecological monitoring is needed to understand the ecological changes after restoration and to establish a long-term management strategy.

• Journal of Ecology and Environment
• /
• v.46 no.4
• /
• pp.282-291
• /
• 2022

Background: The Arctic permafrost stores enormous amount of carbon (C), about one third of global C stocks. However, drastically increasing temperature in the Arctic makes the stable frozen C stock vulnerable to microbial decomposition. The released carbon dioxide from permafrost can cause accelerating C feedback to the atmosphere. Soil organic matter (SOM) composition would be the basic information to project the trajectory of C under rapidly changing climate. However, not many studies on SOM characterization have been done compared to quantification of SOM stocks. Thus, the purpose of our study is to determine soil properties and molecular compositions of SOM in four different Arctic regions. We collected soils in different soil layers from 1) Cambridge Bay, Canada, 2) Council, Alaska, USA, 3) Svalbard, Norway, and 4) Zackenberg, Greenland. The basic soil properties were measured, and the molecular composition of SOM was analyzed through pyrolysis-gas chromatography/mass spectrometry (py-GC/MS). Results: The Oi layer of soil in Council, Alaska showed the lowest soil pH and the highest electrical conductivity (EC) and SOM content. All soils in each site showed increasing pH and decreasing SOC and EC values with soil depth. Since the Council site was moist acidic tundra compared to other three dry tundra sites, soil properties were distinct from the others: high SOM and EC, and low pH. Through the py-GC/MS analysis, a total of 117 pyrolysis products were detected from 32 soil samples of four different Arctic soils. The first two-axis of the PCA explained 38% of sample variation. While short- and mid-hydrocarbons were associated with mineral layers, lignins and polysaccharides were linked to organic layers of Alaska and Cambridge Bay soil. Conclusions: We conclude that the py-GC/MS results separated soil samples mainly based on the origin of SOM (plants- or microbially-derived). This molecular characteristics of SOM can play a role of controlling SOM degradation to warming. Thus, it should be further investigated how the SOM molecular characteristics have impacts on SOM dynamics through additional laboratory incubation studies and microbial decomposition measurements in the field.