• 한국과학교육학회지
• /
• 제4권1호
• /
• pp.15-25
• /
• 1984

The purpose of this study is to develop a practical and ideal model of science laboratory enrolled 48-60 students by studying optimal facilities such as laboratory tables and chairs proper to elementary school settings. The science laboratory model was figured out in terms of the following six procedures; (1) Current status as well as problems of science laboratory and its facilities was identified by means of the questionnaires conducted to 201 elementary schools, using stratified cluster sampling tehnique, under the consideration of the school size and the regional characteristics across the country. (2) Collected were the anthropometric data with respect to sitting height, popliteal height, buttock popliteal length, elbow rest height, and back width from the 747 students, 4th-6th grade, in Seoul area. (3) It was measured the work apace necessary for individual student to perform his experiment. (4) Using the data of the process (2), we determined the optimal sizes of laboratory tables and chairs fitted for Korean elementary school students. (5) The optimal area of science laboratory for 48-60 students is determined in terms of the data obtained in (3) for individual work space in addition to the appropriate table size figured out by (4). (6) A practical and ideal model for a science laboratory in elementary school was designed according to the above procedures. For the optimal model of science laboratory, the results of this study can be summarized as follows: The sizes of chair and table are categorized into three groups such as small, medium, and large depending on students' physical outfit. The small size base on the 12.5th percentile point of students' sitting height is used for students of the 0-25th percentile ranks. The medium size base on the 50th percentile point of students' sitting height is used for students of the 26-75th percentile ranks. The large size base on the 87.5th percentile point of students' sitting height is used for students of the 76-100th percentile ranks. (1) Sizes of chairs: The small size is 28cm in width and 33cm in height. The medium size is 31cm in width and 36cm in height. The large size is 35cm in width and 38cm in height. (2) Sizes of laboratory tables: The small size is 120cm in length, 86cm in width, and 60cm in height. The large size is 120cm in length, 86cm in width, and 60cm in height. The large size is 120cm in length, 86cm in width, and 65cm in height. (3) Size of science laboratory: The optimal science laboratory for 48-60 elementary school students, which can install the 12 laboratory tables, is 12m in length and 10m in width.

• 교육시설
• /
• 제13권4호
• /
• pp.5-14
• /
• 2006

The purpose of this study is to suggest a model plan for a mini school using the lower part of the apartment. In order to reach this model, firstly, the existing condition of over populated schools is analyzed, secondly, the Proper size and planning module for a mini school are suggested through the analysis of 7th national curriculum for the education, and thirdly, the model plan for a mini school is suggested using the apartment under construction. Mini school will be expected to solve the problems from over populated schools, and enhance the educational effect for the primary students.

• Journal of Species Research
• /
• 제9권3호
• /
• pp.191-197
• /
• 2020

Species belonging to the genus Tryblionella are important members of the diatom assemblages of benthic environments such as tidal flats. Their proper identification is thus of great importance in terms of taxonomy, ecology, as well as environmental sciences. However, many species of the genus have been neglected and/or misidentified during diatom studies of Korean tidal flats possibly due to the small size of the species. Lack of proper references for the identification of the species is also noted. To better understand the diversity of Tryblionella species, sediment samples were taken from various tidal flats of the Yellow Sea. Light microscope (LM) and scanning electron microscope (SEM) observations have shown the presence of Tryblionella adducta and T. hyalina, which have not been previously reported from Korean tidal flats. The former was found mostly from sand flats and the latter from mudflats. It is expected that the present study would contribute to a better understanding of the diversity and ecology of benthic diatoms of the Korean tidal flats.

• Journal of Biosystems Engineering
• /
• 제25권5호
• /
• pp.351-358
• /
• 2000

This study was conducted to develop a speed control system of a DC motor which drove a barley seeder mounted on a combine harvester. Barley seeder mounted on a combine has been known to reduce labor and cost of barley cultivation. However, development of the seeder has been unsuccessful because the combine, a dedicated rice and barley harvester has not enough space and proper power take-off for barley seeder. To develop a barley seeder, small powered motor speed controller was required. A proximity sensor for detecting working speed of the combine and a programmable one board microprocessor was used to develope a control system. Motor parameters and motor constant, relationship between seeding rate, motor speed, groove volumes of a tested roller, torque were measured. The proximity sensor sent a frequency signal to the microprocessor. In laboratory experiments, the excitation voltage of the motor was shown not to be proportional to the size of pulse width (duty ratio). A table transforming frequency signal, that represented for working speed to proper pulse width was developed from seeding rate experiments. However, seeding rate at low frequency signal was not proportional to the working speed. Seeding rate control proportional to the frequency signal was achieved by shifting of the frequency signal.

• 대한안전경영과학회지
• /
• 제17권3호
• /
• pp.45-52
• /
• 2015

Depending on the growth of the construction industry, size of construction sites are becoming enlarged, and construction work is becoming diversified as well. However, this increases risks of safety accidents. In order to alleviate this problem, some large construction companies have implemented a Safety Patrol Management System (SPMS) in order to reduce accidents on construction sites. Aimed at the construction sites where SPMS has been applied, the purpose of this research is to calculate the proper number of SPMS safety mangers by comparing and contrasting the number of safety managers per person for each site with different sizes and the converted accident ratio. In addition, we also aim to calculate the adequate amount of SPMS safety management costs compared to the total amount of construction expenses required once SPMS is introduced.

• 대한관절경학회지
• /
• 제2권2호
• /
• pp.155-158
• /
• 1998

The purpose of this study is to evaluate the cause, size, number, nature and locaton of loose bodies in the knee joint and to describe the proper arthroscopic technique to remae the loose bodies according to the location of them. We retrospectively analysed thirty-three operations of arthroscopic removal of loose bodies from the knee. Eleven males and 22 females were included with average age of 38(range 7-71). Total number of removed loose bodies were more than sixty. The loose bodies were found most commonly at anterior intercondylar notch area. The most common associated pathology was degenerative arthritis. The most common size of loose bodies was in the range of 5mm to 10mm in diameter. The most common nature of loose bodies was osteochondral. The loose bodies located in suprapatellar pouch, medial gutter, lateral gutter. anterior intercondylar notch or posterior intercondylar notch were removed using standard portals such as anteromedial, anterolateral, superomedial and posteromedial portals. The removal of loose bodies located in upper portion of posteromedial or posterolateral compartment were greatly enhanced using posterior trans-septal portal. The proper portals for the visualization and removal of loose bodies were identified according to the location of loose bodies in the knee joint. More skill in the use of the arthroscope is required for the removal of loose bodies than for simple diagnostic arthroscopy.

• 한국의류산업학회지
• /
• 제11권2호
• /
• pp.301-307
• /
• 2009

The purpose of this study is to investigate the problem and complaint of current flight suit derived with the questionnaires. The survey was carried out to the 137 aviators in Army Aviation School from April to May, 2007. The questionnaires were composed of personal characteristics, usage characteristics, wearing characteristics and free comments. Regard to the questionnaires of usage characteristics, they wore the flight suit over 6 hours a day and over 5 days a week. For wearing convenience item in usage characteristics it was revealed that fitness, ease and the location of pocket were not proper, Also, it showed that the material characteristics(e.g. insulation, absorption, and sensation) for flight suit was not proper. Regard to the questionnaire of wearing characteristics, the most inconvenient part is crotch as the answer on the question of "unfitting part in size" and "inconvenient part when wearing". Free comments for the improvement requests are various size, material, stitch strengthening, pattern modifying, and accessories.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.993-996
• /
• 1993

This paper addresses the structure and its associated learning algorithms of a feedforward multi-layered connectionist network, which has distributed learning abilities, for realizing the basic elements and functions of a traditional fuzzy logic controller. The proposed neural-network-based fuzzy logic control system (NN-FLCS) can be contrasted with the traditional fuzzy logic control system in their network structure and learning ability. An on-line supervised structure/parameter learning algorithm dynamic learning algorithm can find proper fuzzy logic rules, membership functions, and the size of output fuzzy partitions simultaneously. Next, a Reinforcement Neural-Network-Based Fuzzy Logic Control System (RNN-FLCS) is proposed which consists of two closely integrated Neural-Network-Based Fuzzy Logic Controllers (NN-FLCS) for solving various reinforcement learning problems in fuzzy logic systems. One NN-FLC functions as a fuzzy predictor and the other as a fuzzy controller. As ociated with the proposed RNN-FLCS is the reinforcement structure/parameter learning algorithm which dynamically determines the proper network size, connections, and parameters of the RNN-FLCS through an external reinforcement signal. Furthermore, learning can proceed even in the period without any external reinforcement feedback.

• 대한치과교정학회지
• /
• 제44권5호
• /
• pp.229-235
• /
• 2014

Objective: The aim of this study was to assess artifacts induced by metallic restorations in three-dimensional (3D) dental surface models derived by cone-beam computed tomography (CBCT). Methods: Fifteen specimens, each with four extracted human premolars and molars embedded in a plaster block, were scanned by CBCT before and after the cavitated second premolars were restored with dental amalgam. Five consecutive surface models of each specimen were created according to increasing restoration size: no restoration (control) and small occlusal, large occlusal, disto-occlusal, and mesio-occluso-distal restorations. After registering each restored model with the control model, maximum linear discrepancy, area, and intensity of the artifacts were measured and compared. Results: Artifacts developed mostly on the buccal and lingual surfaces. They occurred not only on the second premolar but also on the first premolar and first molar. The parametric values increased significantly with increasing restoration size. Conclusions: Metallic restorations induce considerable artifacts in 3D dental surface models. Artifact reduction should be taken into consideration for a proper diagnosis and treatment planning when using 3D surface model derived by CBCT in dentofacial deformity patients.

• Journal of Information Processing Systems
• /
• 제16권3호
• /
• pp.699-717
• /
• 2020

Propagation time on permissionless blockchain plays a significant role in terms of stability and performance in the decentralized systems. A large number of activities are disseminated to the whole nodes in the decentralized peer-to-peer network, thus causing propagation delay. The stability of the system is our concern in the first place. The propagation delay opens up opportunities for attackers to apply their protocol. Either by accelerating or decelerating the propagation time directly without proper calculation, it brings numerous negative impacts to the entire blockchain system. In this paper, we thoroughly review and elaborate on several parameters related to the propagation time in such a system. We describe our findings in terms of data communication, transaction propagation, and the possibility of an interference attack that caused an extra propagation time. Furthermore, we present the influence of block size, consensus, and blockchain scalability, including the relation of parameters. In the last session, we remark several points associated with the propagation time and use cases to avoid dilemmas in the light of the experiments and literary works.