• 공학교육연구
• /
• 제5권2호
• /
• pp.3-9
• /
• 2002

최근 들어 인터넷과 웹의 보급이 확산됨에 따라 이를 이용한 교육용 콘텐츠들이 활발히 제작되고 있다. 본 연구에서는 전기전자 분야의 기본과목인 전기자기학을 교과의 대상으로 하여 콘텐츠를 제작하였다. 이 교과를 다루는 대부분의 교재들은 복잡한 수식으로 현상을 설명하고 있으므로 학생들이 현상을 이해하는 것이 쉽지 않다. 그리하여 학습 효과의 증대를 위하여 HTML, 그림, 애니메이션 및 음성 같은 멀티미디어 기법을 사용하여 콘텐츠를 제작하였다. 또한 다양한 전기자기적인 문제의 해석 및 연습에 사용할 수 있는 소프트웨어가 저자에 의해 개발되어 콘텐츠 내에 활용되었다. 본 콘텐츠의 전체적인 구성은 정전계, 정자계, 시변전자계 및 전파의 전파로 되어 있다.

• 화약ㆍ발파
• /
• 제31권1호
• /
• pp.23-32
• /
• 2013

발파, 브레이커, 진동로울러 및 파일 작업과 같은 건설공정이 있을 경우, 건설 작업 인접 지역에서는 피해가 발생할 수 있다. 수중 소음의 경우, 지반진동이 고체 전달음의 형태로 전달된다. 이와 같은 수중소음은 강이나 바다 혹은 육지의 양식장에 피해를 유발할 수 있다. 본 연구는 발파, 천공, 브레이커 및 진동로울러와 같은 작업 공정으로 인하여 발생된 지반진동이 수중소음으로 입사될 때의 소음값 및 주파수를 분석하였다. 수중 소음 측정시에는 수중소음기 (TC 4013)을 활용하였으며, 저장 및 분석은 Prosig 프로그램을 활용하였다.

• 한국통신학회논문지
• /
• 제39A권10호
• /
• pp.585-592
• /
• 2014

It is well known that serial belief propagation (BP) decoding for low-density parity-check (LDPC) codes achieves faster convergence without any increase of decoding complexity per iteration and bit error rate (BER) performance loss than standard parallel BP (PBP) decoding. Serial BP (SBP) decoding, such as horizontal SBP (H-SBP) decoding or vertical SBP (V-SBP) decoding, updates check nodes or variable nodes faster than standard PBP decoding within a single iteration. In this paper, we propose combined horizontal-vertical SBP (CHV-SBP) decoding. By the same reasoning, CHV-SBP decoding updates check nodes or variable nodes faster than SBP decoding within a serialized step in an iteration. CHV-SBP decoding achieves faster convergence than H-SBP or V-SBP decoding. We compare these decoding schemes in details. We also show in simulations that the convergence rate, in iterations, for CHV-SBP decoding is about $\frac{1}{6}$ of that for standard PBP decoding, while the convergence rate for SBP decoding is about $\frac{1}{2}$ of that for standard PBP decoding. In simulations, we use recently proposed generalized LDPC (GLDPC) codes with binary cyclic codes (BCC).

• 한국CDE학회논문집
• /
• 제19권3호
• /
• pp.281-293
• /
• 2014

Although there have been a lot of BIM R&Ds in the civil engineering and their applications to the real projects, BIM in the field is still known to be behind the other areas. One of the reasons for this should be that the civil projects is generally too public for private participants to try new technologies, but it is mainly because the projects are so huge and complex that we still have the working environment where the systematic information sharing or exchanging is not smooth enough. In this paper, we are verifying the possibility and proposing the direction of BIM information standardization technology in civil engineering based on the integrated BIM information standard framework. For this purpose, after reviewing the introduction plan for BIM information framework, we applied it to an actual civil structure for test. The implementation result proved that the framework has possibility and effectiveness for the takeoff and construction cost calculation, which confirmed the standard framework needs to be extended consistently. This study is expected to contribute to the standard system establishment and its technology propagation for BIM development in the civil engineering.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.822-828
• /
• 2018

AC-DC conversion is a necessary for the systems that require DC source. This conversion has been done via rectifiers based on controlled or uncontrolled semiconductor switches. Advances in the power electronics and microprocessor technologies allowed the use of Pulse Width Modulation (PWM) rectifiers. In this paper, dq-axis current and DC link voltage of three-phase PWM rectifier are controlled by using type-2 fuzzy neural network (T2FNN) controller. For this aim, a simulation model is built by MATLAB/Simulink software. The model is tested under three different operating conditions. The parameters of T2FNN is updated online by using back-propagation algorithm. The results obtained from both T2FNN and Proportional + Integral + Derivate (PID) controller are given for three operating conditions. The results show that three-phase PWM rectifier using T2FNN provides a superior performance under all operating conditions when compared with PID controller.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.99-104
• /
• 2011

This paper describes a design strategy at conceptual design stage using RETScreen software tool for building application of renewable energy resources. Currently, government and public buildings are required to adopt renewable energy systems with a minimum requirement for the amount of renewable energy supply. Meanwhile, there is a certificate program for private office buildings to enhance propagation of renewable energy systems. When considering application of renewable energy systems to a building, it is worthwhile developing a method to determine optimal design sizes of renewable energy systems. In the paper, a design strategy is introduced with a couple of case studies to determine optimal capacities of each renewable energy system in a building and suggest to use the method to evaluate the system for the building certificate program and the mandatory renewable target program. Objective functions considered in the study are initial system cost and reduction of CO2 emissions from the system. In the optimization study, it is assumed that solar thermal collectors are installed to satisfy solar fraction of 60%. Other renewable energy systems such as ground-source heat pump, solar PV and non-renewable systems such as electric chiller and gas-fired boiler are sized using an optimal sizing method with RETScreen suggested the authors previously.

• ETRI Journal
• /
• 제42권2호
• /
• pp.163-174
• /
• 2020

Numerous wearable technology companies have recently developed several headmounted display (HMD) products for virtual reality (VR) services. 5G wireless networks aim at providing high-quality 3D multimedia services such as VR, augmented reality, and mixed reality. In this study, we examine the application of millimeter-wave (mmWave) technology to realize low-latency wireless communication between an HMD and its content server. However, the propagation characteristics of mmWave present several challenges such as the deafness, blockage, and beam alignment problems, and interference among content servers. In this study, we focus on an environment that provides VR services in the mmWave band and introduce existing techniques for addressing such challenges. In addition, we employ a commercialized IEEE 802.11ad VR dongle to measure the actual data rate of an mmWave VR application and identify the degree to which the performance deteriorates when the above problems occur. Finally, we verify the feasibility of the proposed solutions through a simulation of several VR scenarios in the mmWave band.

• Computers and Concrete
• /
• 제3권2_3호
• /
• pp.79-90
• /
• 2006

This paper describes the results of an investigation into high mass-low velocity impact behaviour of reinforced concrete beams. Tests have been conducted on fifteen 2.7 m or 1.5 m span beams under drop-weight loads. A high-speed video camera has been used at rates of up to 4,500 frames per second in order to record the crack formation, propagation, particle spallation and scabbing. In some tests the strain in the reinforcement has been recorded using "Durham" strain gauged bars, a technique developed by Scott and Marchand (2000) in which the strain gauges are embedded in the bars, so that the strains in the reinforcement can be recorded without affecting the bond between the concrete and the reinforcement. The impact force acting on the beams has been measured using a load cell placed within the impactor. A high-speed data logging system has been used to record the impact load, strains, accelerations, etc., so that time histories can be obtained. This research has led to the development of computational techniques based on combined continuum/discontinuum methods (finite/discrete element methods) to permit the simulation of impact loaded reinforced concrete beams. The implementation has been within the software package ELFEN (2004). Beams, similar to those tested, have been analysed using ELFEN a good agreement has been obtained for both the load-time histories and the crack patterns.

• 대한전자공학회논문지TC
• /
• 제42권12호
• /
• pp.159-164
• /
• 2005

최근 정보량의 증가로 고속 디지털 회로를 요구하고 있다. 이에 따라 소형 고주파 회로에 전자기 특성이 중요하게 대두되었다. 그래서 불완전한 그라운드 상에 PCB 회로의 고속 디지털 전송라인에 대한 신호 집적도와 두 평행 선로 사이의 결합특성을 3차원 전자기 해석법인 시간영역 유한차분법을 이용하여 해석하였다. FDTD 시뮬레이션 결과는 상용 회로 소프트웨어 툴인 ADS 시뮬레이터와 비교하였고, 집중 소자 모델링, 주파수에 따른 슬롯에 의한 전자파의 방사 등을 해석하였다. 결과로써 마이크로스트립 선로 아래 슬롯이 있는 경우 신호의 전송에 큰 영향을 끼치는 것을 알 수 있다.

• Steel and Composite Structures
• /
• 제17권2호
• /
• pp.145-157
• /
• 2014

This study aimed to investigate the fatigue crack growth behavior of a kind of fiber metal laminates (FML) under four different stress levels. The FML specimen consists of three 2024-T3 aluminum alloy sheets and two layers of glass/epoxy composite lamina. Tensile-tensile cyclic fatigue tests were conducted on centrally notched specimen at four stress levels with various maximum values. A digital camera system was used to take photos of the propagating cracks on both sides of the specimens. Image processing software was adopted to accurately measure the length of the cracks on each photo. The test results show that: (1) a-N and da/dN-a curves of FML specimens can be divided into transient crack growth segment, steady state crack growth segment and accelerated crack growth segment; (2) compared to 2024-T3 aluminum alloy, the fatigue properties of FML are much better; (3) da/dN-${\Delta}K$ curves of FML specimens can be divided into fatigue crack growth rate decrease segment and fatigue crack growth rate increase segment; (3) the maximum stress level has a large influence on a-N, da/dN-a and da/dN-${\Delta}K$ curves of FML specimens; (4) the fatigue crack growth rate da/dN presents a nonlinear accelerated increasing trend to the maximum stress level; (5) the maximum stress level has an almost linear relationship with the stress intensity factor ${\Delta}K$.