• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.1406-1407
• /
• 2015

본 논문에서는 도로 위 숫자 및 기호인식에 적합한 Calibration Model에 대하여 연구하였다. 기존에 제시된 Geometric Transform, Fisheye Projection, Caltech Toolbox 기반 방법으로 얻은 Calibration Model의 성능을 비교하였다. Geometric Transform은 Fisheye Distortion Correction에 부적합한 결과를 얻었고, Fisheye Projection은 성능은 좋으나 시스템에 사용할 Camera Lens의 Specification을 모르기 때문에 이를 예측해야 하는 단점이 있다. 마지막으로 Caltech Tool box 기반 방법은 Calibration을 위한 Keypoint를 수동으로 지정하다 보니까 이로 인한 오차가 존재하게 된다. Calibration을 시도 할 때마다 결과에 차이가 있었으며, Calibration 결과의 측면에서 Fisheye Projection이 가시적으로 가장 좋은 결과를 나타냈다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.34.4-34
• /
• 2002

1. Introduction 2. Basic Camera models and geometry 3. Projection of line widths 4. Camera calibration algorithm 5. Experimental results 6. Conclusions and future work

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.5
• /
• pp.1182-1191
• /
• 1994

This paper presents an enhanced method of slit beam projection intended for the rapid measurement of 3-dimensional surface profiles of dies and molds. Special emphasis is given to optimizing the design of optical system so that the measuring accuracy can be maximized by adopting two-plane camera calibration together with sub-pixel image processing techniques. Finally, several measurement examples are discussed to demonstrate that an actual measuring accuracy of $\pm$ 0.2 mm can be achieved over the measuring range of 500 mm{\times}300mm{\times}200mm$.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.3
• /
• pp.670-679
• /
• 1995

This paper presents the 3-D profile measurement system of live human faces, which was developed specially for 'KUMDORI sculptor robot' of the '93 Taejon Exposition. '93 Taejon EXPO. The basic principle for measurement adopts the slit beam projection which is a method of measuring 3-D surface profiles using geometric optics between the slit beam and the CCD camera. Since the slit beam projection consumes long measuring time, it is unfit to measure the 3-D profiles of living objects as human. Therefore, the projection type slit beam method which consumes short measuring time is newly suggested. And an algorithm to reconstruct the 3-D profile from the deformed images using finite approximated calibration is suggested and practically implemented. The projection type slit beam method was applied to spectators in a period of '93 Taejon EXPO. The measurement results show that the technique is suitable for 3-D face profile measurement on a living body.

• Journal of the Korea Computer Graphics Society
• /
• v.21 no.1
• /
• pp.1-11
• /
• 2015

Researchers have developed virtual reality environments to provide audience with more visually immersive experiences than previously possible. One of the most popular solutions to build the immersive VR space is a multi-projection technique. However, utilization of multiple projectors requires large spaces, expensive cost, and accurate geometry calibration among projectors. This paper presents a novel omnidirectional projection system with a single projector and a single spherical mirror.We newly designed the simple and intuitive calibration system to define the shape of environment and the relative position of mirror/projector. For successful image projection, our optimized omnidirectional image generation step solves image distortion produced by the spherical mirror and a calibration problem produced by unknown parameters such as the shape of environment and the relative position between the mirror and the projector. Additionally, the focus correction is performed to improve the quality of the projection. The experiment results show that our method can generate the optimized image given a normal panoramic image for omnidirectional projection in a rectangular space.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.151-159
• /
• 2003

This study presents method for self-calibration of the SEM(Scanning Electron Microscope) stereo image using the standard microprobe with same grid pattern and using parallel and central perspective projection equation. Result showed that parallel projection method is more suitable for standard microprobe. The maximum error of 3D coordinates acquired by this method did not exceed 5 $\mu\textrm{m}$, and DSM(Digital Surface Model) for three dimensional measurement of the rock sample was generated by the digital photogrammetry. This result can be used for quantification of micro scale change of shape and analysis of the micro morphology of rock due to weathering.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.1
• /
• pp.62-72
• /
• 1997

High flexibility and productivity using industrial robots are being achieved in manufacturing lines with off-line robot programmings. A good off-line programming system should have functions of robot modelling, trajectory planning, graphical teach-in, kinematic and dynamic simulations. Simulated results, however, can hardly be applied to on-line tasks until any calibration procedure is accompained. This paper proposes a visual calibration scheme in order to provide a calibration tool for our own off-line programming system of SCARA robots. The suggested scheme is based on the position-based visual servoings, and the perspective projection. The scheme requires only one camera as it uses saved kinematic data for three-dimensional visual calibration. Predicted images are generated and then compared with camera images for updating positions and orientations of objects. The scheme is simple and effective enough to be used in real time robot programming.

• Journal of Sensor Science and Technology
• /
• v.28 no.3
• /
• pp.182-186
• /
• 2019

When a camera is employed for 3D sensing, accurate camera calibration is vital as it is a prerequisite for the subsequent steps of the sensing process. Camera calibration is usually performed by complex mathematical modeling and geometric analysis. On the other contrary, data learning using an artificial neural network can establish a transformation relation between the 3D space and the 2D camera image without explicit camera modeling. However, a neural network requires a large amount of accurate data for its learning. A significantly large amount of time and work using a precise system setup is needed to collect extensive data accurately in practice. In this study, we propose a two-step neural calibration method that is effective when only a small amount of learning data is available. In the first step, the camera projection transformation matrix is determined using the limited available data. In the second step, the transformation matrix is used for generating a large amount of synthetic data, and the neural network is trained using the generated data. Results of simulation study have shown that the proposed method as valid and effective.

• Journal of the Korea Computer Graphics Society
• /
• v.29 no.3
• /
• pp.1-12
• /
• 2023

Software tools for manual 3D projection mapping have been widely used in theme parks and exhibitions. However, no research has been conducted on detailed utilization methods and usability of those tools yet. This study organizes the entire process of manual 3D projection mapping step by step and analyzes the problems that occurred at each step to identify potential improvements of 3D projection mapping tools. First, we introduce the process, which includes: two methods for creating virtual-physical object pairs to construct a virtual environment that is identical to the real-world target of the 3D projection mapping, the production of video textures for special effects, and mapping methods that use semi-automatic projector calibration. In addition, through experiments comparing and analyzing two widely used tools under various conditions for 3D mapping, we identified the technical limitations, performance differences between tools, and issues that impede usability. Finally, we suggest improvements and future research directions to enhance the usability of the 3D projection mapping technology.

• Journal of Korea Game Society
• /
• v.7 no.4
• /
• pp.63-70
• /
• 2007

Since the fisheye lens has a wide field of view, it can capture the scene and illumination from all directions from far less number of omnidirectional images. Due to these advantages of the omnidirectional camera, it is widely used in surveillance and reconstruction of 3D structure of the scene In this paper, we present a new self-calibration algorithm of omnidirectional camera from uncalibrated images by considering the inlier distribution. First, one parametric non-linear projection model of omnidirectional camera is estimated with the known rotation and translation parameters. After deriving projection model, we can compute an essential matrix of the camera with unknown motions, and then determine the camera information: rotation and translations. The standard deviations are used as a quantitative measure to select a proper inlier set. The experimental results showed that we can achieve a precise estimation of the omnidirectional camera model and extrinsic parameters including rotation and translation.