• 제목/요약/키워드: Projection based

검색결과 1,213건 처리시간 0.022초

역 투영과 휴 모멘트를 이용한 손영역 검출 및 모양 분류 (Hand Region Detection and hand shape classification using Hu moment and Back Projection)

  • 신재선;장대식
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2011년도 추계학술대회
    • /
    • pp.911-914
    • /
    • 2011
  • 손 영역을 찾는 것은 사용자 중심의 인터페이스를 제공하는 데 있어서 꼭 필요한 기술이며 이를 위해 많은 연구가 진행되어 왔다. 본 논문은 HSV 공간을 기반으로 한 역 투영 기법을 사용하여 손영역 검출을 수행하였으며, 휴 모멘트를 통해 추출된 손 영역을 분석, 손 모양 인식에 대한 방법을 제안한다. 역 투영 기법을 통해 손 영역 검출에 대한 신뢰도를 높였으며, 휴 모멘트를 통해 손모양을 구분할 수 있음을 확인하였다.

  • PDF

볼륨프로 하드웨어를 이용한 효율적인 투시투영 방법 (An Efficient Perspective Projection using $\textrm{VolumePro}^{TM}$ Hardware)

  • 임석현;신병석
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제31권3_4호
    • /
    • pp.195-203
    • /
    • 2004
  • 볼륨프로는 일반 PC상에서도 실시간 볼륨렌더링이 가능하도록 고안된 하드웨어이다. 그러나 볼륨프로는 직교투영(orthographic projection) 기능만 제공하기 때문에 가상 내시경과 같이 투시투영 (perspective projection)이 필요한 분야에는 이용할 수 없다. 이런 문제를 해결하기 위해 볼륨 데이터를 여러 개의 슬랩(slab)으로 분할하여 투시투영을 근사 하는 방법이 소개되었으나 이 방법은 시각 절두체에 포함되지 않은 부분까지 렌더링 하기 때문에 처리시간이 길어지는 문제가 있다. 본 논문에서는 볼륨프로의 크로핑(cropping) 기능을 이용하여 볼륨 데이타를 여러 개의 서브볼륨으로 분할함으로써 효율적인 투시투영이 가능하도록 하는 방법을 제안한다. 이 방법은 시각 절두체(view frustum)에 포함되는 부분만 렌더링하므로 슬랩을 이용하는 기존 방법과 동일한 화질을 가지면서 처리시간을 단축시킨다.

아연도금 강재의 용접성에 미치는 돌기 성형 및 피복조건의 영향 (Effects of Projection Height and Post Treatment on the Resistance Projection Weldability of Zn Coated Sheet Steels)

  • 김기철;이목영
    • Journal of Welding and Joining
    • /
    • 제17권5호
    • /
    • pp.83-88
    • /
    • 1999
  • In this paper resistance projection weldability of Zn coated steels with post treatment has been discussed. Projection welding was performed by a condenser discharge type power source which was equipped with welding parameter monitoring system. Mechanical test results indicated that the effect of post coatings on the projection front changed showing very small very small spattering at the weld strength was negligible. However, contamination rate of the block electrode varied depending on the post treatment coatings. Test results also showed that projection height before welding should be kept to be 80-100% of the specimen thickness as far as the surface quality was taken into consideration. Based on the high speed photography, discharge condition at the beginning stage of the welding process. It was considered that the spattering reduced the weld strength slightly at the optimum heat input range.

  • PDF

개선된 Back Projection 기법과 에지맵 보간을 이용한 단일 영상 기반 초해상도 알고리즘 (Single Frame Based Super Resolution Algorithm Using Improved Back Projection Method and Edge Map Interpolation)

  • 최유정;김윤
    • 한국컴퓨터정보학회:학술대회논문집
    • /
    • 한국컴퓨터정보학회 2015년도 제52차 하계학술대회논문집 23권2호
    • /
    • pp.264-267
    • /
    • 2015
  • 본 논문에서는 개선된 고속의 Back Projection 기법과 에지맵 보간을 이용한 단일영상 기반의 초해상도(super resolution) 영상을 생성하는 알고리즘을 제안한다. 본 논문에서 제안하는 알고리즘은 영상의 색채 왜곡을 방지하기 위해 RGB 컬러 도메인에서 HSV 컬러 도메인으로 변경하여 밝기정보인 V만 이용한다. 먼저 잡음제거와 속도 향상을 위해 개선된 고속 back projection을 이용해 영상을 확대 재구성한다. 이와 함께 LoG(laplacian of gaussian) 필터링을 이용하여 에지 맵을 추출한다. 에지의 정보와 back projection의 결과를 이용하여 고해상도 영상을 재구성한다. 제안하는 알고리즘을 이용하여 복원한 영상은 부자연스러운 인공물을 효과적으로 제거하고, blur현상을 줄여 에지 정보를 보정하고 강조해준다. 또한 실험을 통해 제안하는 알고리즘이 기존의 보간법과 전통적인 back projection 결과보다 주관적인 화질이 우수하고 객관적으로 우수한 성능을 나타내는 것을 입증한다.

  • PDF

프로젝션 기반의 감소현실 시스템 (Projection-Based Diminished Reality System)

  • 이승훈;박한훈;서병국;박종일
    • 한국컴퓨터그래픽스학회논문지
    • /
    • 제13권2호
    • /
    • pp.55-60
    • /
    • 2007
  • 본 논문은 프로젝터를 이용한 색상 및 기하 보정기술과 영상완성(image completion)기술을 결합하여 감소현실(diminished reality, DR)을 체험 할 수 있는 시스템을 제안한다. 감소현실은 증강현실(augmented reality)과 반대되는 개념으로 실세계에 존재하는 불필요한 객체 혹은 정보를 가상으로 은닉함으로써 사용자에게 시각적 편의를 제공하는 기술이다. 기존에 데스크탑 혹은 HMD 기반의 감소현실 기술은 개발된 사례가 있으나, 프로젝션 기반의 감소현실 기술에 대한 개발 사례는 없었다. 최근 고화질, 경량의 프로젝터의 일반화와 함께 프로젝션 기반 디스플레이의 응용분야가 크게 증가하고 있음을 감안해 볼 때, 프로젝션 기반의 감소현실 기술에 대한 요구는 크게 증가할 것이다. 본 논문에서는 프로젝션 기반의 감소현실을 구현하기 위한 기술적 과제들을 해결하고 그 응용사례를 제시함으로써 프로젝션 기반의 감소현실 시스템의 필요성 및 가능성을 제시하고자 한다.

  • PDF

DIRECT EPIPOLAR IMAGE GENERATION FROM IKONOS STEREO IMAGERY BASED ON RPC AND PARALLEL PROJECTION MODEL

  • Oh, Jae-Hong;Kim, Kyung-Ok
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
    • /
    • pp.860-863
    • /
    • 2006
  • Epipolar images have to be generated to stereo display aerial images or satellite images. Pushbroom sensor is used to acquire high resolution satellite images. These satellite images have curvilinear epipolar lines unlike the epipolar lines of frame images, which are straight lines. The aforementioned fact makes it difficult to generate epipolar images for pushbroom satellite images. If we assume a linear transition of the sensor having constant speed and attitude during image acquisition, we can generate epipolar images based on parallel projection model (2D Affine model). Recent high resolution images are provided with RPC values so that we can exploit these values to generate epipolar images without using ground control points and tie point. This paper provides a procedure based on the parallel projection model for generating epipolar images directly from a stereo IKONOS images, and experimental results.

  • PDF

Ray와 Voxel 교차 길이 반복성 기반 고속 Projection 영상 생성 기법 (Fast Computation of Projection Image Based on the Repeated Patterns of Intersection between Ray and Voxel)

  • 이현정;김정태
    • 전기학회논문지
    • /
    • 제66권6호
    • /
    • pp.942-948
    • /
    • 2017
  • Ray-tracing based method for computing projection image calculates the exact amounts of the intersection between voxels and a ray. Among several different implementations of the ray tracing based methods, Siddon's method is the earliest one. Later faster implementation such as Jacobs's method, Zhao's method, were investigated. To our knowledge, Zhao's method is the fastest one among these. We improve the speed of the Zhao's method by predicting the number of the same intersection length between voxel and a ray. In our experiment, the proposed method showed significantly faster computation speed than Zhao's method.

Direct Epipolar Image Generation From IKONOS Stereo Imagery Based On RPC and Parallel Projection Model

  • Oh, Jae-Hong;Shin, Sung-Woong;Kim, Kyung-Ok
    • 대한원격탐사학회지
    • /
    • 제22권5호
    • /
    • pp.451-456
    • /
    • 2006
  • Epipolar images have to be generated to stereo display aerial images or satellite images. Pushbroom sensor is used to acquire high resolution satellite images. These satellite images have curvilinear epipolar lines unlike the epipolar lines of frame images, which are straight lines. The aforementioned fact makes it difficult to generate epipolar images for pushbroom satellite images. If we assume a linear transition of the sensor having constant speed and attitude during image acquisition, we can generate epipolar images based on parallel projection model (20 Affine model). Recent high resolution images are provided with RPC values so that we can exploit these values to generate epipolar images without using ground control points and tie point. This paper provides a procedure based on the parallel projection model for generating epipolar images directly from a stereo IKONOS images, and experimental results.

Light guide based optical engine for light-valve-projection

  • Salters, B.A.;Krijn, M.P.C.M.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
    • /
    • pp.935-938
    • /
    • 2004
  • We have studied several light guide concepts for light-valve projection engines. The aim of the light guide is to replace the array of lenses and mirrors in conventional transmission-type projection engines. Volume, cost and weight can be reduced, at a similar or better performance level. Results of a first prototype are discussed.

  • PDF

Geometric Correction for Uneven Quadric Projection Surfaces Using Recursive Subdivision of B$\acute{e}$zier Patches

  • Ahmed, Atif;Hafiz, Rehan;Khan, Muhammad Murtaza;Cho, Yongju;Cha, Jihun
    • ETRI Journal
    • /
    • 제35권6호
    • /
    • pp.1115-1125
    • /
    • 2013
  • This paper presents a scheme for geometric correction of projected content for planar and quadratic projection surfaces. The scheme does not require the projection surface to be perfectly quadratic or planar and is therefore suitable for uneven low-cost commercial and home projection surfaces. An approach based on the recursive subdivision of second-order B$\acute{e}$zier patches is proposed for the estimation of projection distortion owing to surface imperfections. Unlike existing schemes, the proposed scheme is completely automatic, requires no prior knowledge of the projection surface, and uses a single uncalibrated camera without requiring any physical markers on the projection surface. Furthermore, the scheme is scalable for geometric calibration of multi-projector setups. The efficacy of the proposed scheme is demonstrated using simulations and via practical experiments on various surfaces. A relative distortion error metric is also introduced that provides a quantitative measure of the suppression of geometric distortions, which occurs as the result of an imperfect projection surface.